Post-buckling optimization of two-dimensional functionally graded porous beams
Tóm tắt
In the present study, an attempt is made to present the governing equations on the post-buckling of two-dimensional (2D) FGP beams and propose appropriate optimization procedure to achieve optimal post-buckling behavior and mass. To this end, Timoshenko beam theory, Von-Karman nonlinear relations, virtual work principle, and generalized differential quadrature method are considered to derive and solve governing equations and associated boundary condition (Hinged–Hinged) for an unknown 2D porosity distribution. Proposed method is validated using the papers in the literature. The optimization procedure including defining porosity distributions (interpolations), post-buckling function and Taguchi method is then proposed to optimize the post-buckling path and minimize the mass of the 2D-FGP beams. Results indicate that, great improvement can be achieved by optimizing the porosity distribution; for an identical mass, the post-buckling paths of optimum points are closer to desired path (dense structure). The difference between uniform and non-uniform porosity distributions is more (58% higher post buckling function), at higher values of the mass. Optimum distributions mostly have the higher values of porosity at center line of the beam and minimum values at outer line. Analysis of variance is also provided to create a better understanding about design points contributions on the post-buckling path.
Tài liệu tham khảo
Ait Atmane, H., Tounsi, A., Bernard, F.: Effect of thickness stretching and porosity on mechanical response of a functionally graded beams resting on elastic foundations. Int. J. Mech. Mater. Des. 13(1), 71–84 (2017). https://doi.org/10.1007/s10999-015-9318-x
Ansari, R., Mohammadi, V., Faghih Shojaei, M., Gholami, R., Sahmani, S.: Postbuckling characteristics of nanobeams based on the surface elasticity theory. Compos. B Eng. 55, 240–246 (2013). https://doi.org/10.1016/J.COMPOSITESB.2013.05.040
Asgari, M.: Material optimization of functionally graded heterogeneous cylinder for wave propagation. J. Compos. Mater. 50(25), 3525–3528 (2016a). https://doi.org/10.1177/0021998315622051
Asgari, M.: Optimal material tailoring of 2D heterogeneous cylinder for a prescribed temperature field in transient heat conduction. Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. 230(2), 470–483 (2016b). https://doi.org/10.1177/1464420715578700
Babaee, A., Sadighi, M., Nikbakht, A., Alimirzaei, S.: Generalized differential quadrature nonlinear buckling analysis of smart SMA/FG laminated beam resting on nonlinear elastic medium under thermal loading. J. Therm. Stress. 41(5), 583–607 (2018). https://doi.org/10.1080/01495739.2017.1408048
Barati, M. R., Zenkour, A.M.: Post-buckling analysis of refined shear deformable graphene platelet reinforced beams with porosities and geometrical imperfection. Compos. Struct. 181, 194–202 (2017a). https://doi.org/10.1016/J.COMPSTRUCT.2017.08.082
Barati, M.R., Zenkour, A.M.: Investigating post-buckling of geometrically imperfect metal foam nanobeams with symmetric and asymmetric porosity distributions. Compos. Struct. 182, 91–98 (2017b). https://doi.org/10.1016/J.COMPSTRUCT.2017.09.008
Brodlie, K., Mashwama, P., Butt, S.: Visualization of surface data to preserve positivity and other simple constraints. Comput. Graph. 19(4), 585–594 (1995). https://doi.org/10.1016/0097-8493(95)00036-C
Chang, S., Richards, B. E.: Application of generalized differential quadrature to solve two-dimensional incompressible Navier–Stokes equations. Int. J. Numer. Methods Fluids, 15(7), 791–798 (1992). https://doi.org/10.1002/fld.1650150704
Chen, D., Yang, J., Kitipornchai, S.: Elastic buckling and static bending of shear deformable functionally graded porous beam. Compos. Struct. 133, 54–61 (2015). https://doi.org/10.1016/J.COMPSTRUCT.2015.07.052
Chen, D., Yang, J., Kitipornchai, S.: Free and forced vibrations of shear deformable functionally graded porous beams. Int. J. Mech. Sci. 108–109, 14–22 (2016). https://doi.org/10.1016/J.IJMECSCI.2016.01.025
Chen, D., Yang, J., Kitipornchai, S.: Nonlinear vibration and postbuckling of functionally graded graphene reinforced porous nanocomposite beams. Compos. Sci. Technol. 142, 235–245 (2017). https://doi.org/10.1016/J.COMPSCITECH.2017.02.008
Cong, P.H., Chien, T.M., Khoa, N.D., Duc, N.D.: Nonlinear thermomechanical buckling and post-buckling response of porous FGM plates using Reddy’s HSDT. Aerosp. Sci. Technol. 77, 419–428 (2018). https://doi.org/10.1016/J.AST.2018.03.020
Cowper, G. R.: The shear coefficient in Timoshenko’s beam theory. J. Appl. Mech., 33(2), 335–340. (1966). Retrieved from http://dx.doi.org/10.1115/1.3625046
Esfahani, S.E., Kiani, Y., Eslami, M.R.: Non-linear thermal stability analysis of temperature dependent FGM beams supported on non-linear hardening elastic foundations. Int. J. Mech. Sci. 69, 10–20 (2013). https://doi.org/10.1016/J.IJMECSCI.2013.01.007
Feyzi, M.R., Khorshidvand, A.R.: Axisymmetric post-buckling behavior of saturated porous circular plates. Thin Walled Struct. 112, 149–158 (2017). https://doi.org/10.1016/J.TWS.2016.11.026
Gibson, L.J., Ashby, M.F.: The mechanics of three-dimensional cellular materials. Proc. R. Soc. Lond. A. Math. Phys. Sci, 382(1782), 43 LP-59 (1982). Retrieved from http://rspa.royalsocietypublishing.org/content/382/1782/43.abstract
Hedayati, R., Sadighi, M., Mohammadi-Aghdam, M., Zadpoor, A.A.: Mechanical behavior of additively manufactured porous biomaterials made from truncated cuboctahedron unit cells. Int. J. Mech. Sci. 106, 19–38 (2016). https://doi.org/10.1016/J.IJMECSCI.2015.11.033
Ho-Huu, V., Do-Thi, T.D., Dang-Trung, H., Vo-Duy, T., Nguyen-Thoi, T.: Optimization of laminated composite plates for maximizing buckling load using improved differential evolution and smoothed finite element method. Compos. Struct. 146, 132–147 (2016). https://doi.org/10.1016/J.COMPSTRUCT.2016.03.016
Jamshidi, M., Arghavani, J.: Optimal design of two-dimensional porosity distribution in shear deformable functionally graded porous beams for stability analysis. Thin Walled Struct. 120, 81–90 (2017). https://doi.org/10.1016/J.TWS.2017.08.027
Jamshidi, M., Arghavani, J.: Optimal material tailoring of functionally graded porous beams for buckling and free vibration behaviors. Mech. Res. Commun. 88, 19–24 (2018). https://doi.org/10.1016/J.MECHRESCOM.2018.01.006
Kitipornchai, S., Chen, D., Yang, J.: Free vibration and elastic buckling of functionally graded porous beams reinforced by graphene platelets. Mater. Des. 116, 656–665 (2017). https://doi.org/10.1016/J.MATDES.2016.12.061
Rahimi, G.H., Gazor, M.S., Hemmatnezhad, M., Toorani, H.: On the postbuckling and free vibrations of FG Timoshenko beams. Compos. Struct. 95, 247–253 (2013). https://doi.org/10.1016/J.COMPSTRUCT.2012.07.034
Thang, P.T., Nguyen-Thoi, T., Lee, D., Kang, J., Lee, J.: Elastic buckling and free vibration analyses of porous-cellular plates with uniform and non-uniform porosity distributions. Aerosp. Sci. Technol. 79, 278–287 (2018). https://doi.org/10.1016/J.AST.2018.06.010
Wang, Y.Q., Zu, J.W.: Vibration characteristics of moving sigmoid functionally graded plates containing porosities. Int. J. Mech. Mater. Des. (2017). https://doi.org/10.1007/s10999-017-9385-2
Yang, J., Chen, D., Kitipornchai, S.: Buckling and free vibration analyses of functionally graded graphene reinforced porous nanocomposite plates based on Chebyshev-Ritz method. Compos. Struct. 193, 281–294 (2018). https://doi.org/10.1016/J.COMPSTRUCT.2018.03.090