Post annealing to improve the sheet resistance and uniformity of emitter for enhancing conversion efficiency of mass-produced mc-Si solar cells

Green, 2015, The passivated emitter and rear cell (PERC): from conception to mass production, Sol. Energy Mater. Sol. Cell., 143, 190, 10.1016/j.solmat.2015.06.055 Nordmann, 2019, Record-high solar-to-hydrogen conversion efficiency based on a monolithic all-silicon triple-junction IBC solar cell, Sol. Energy Mater. Sol. Cell., 191, 422, 10.1016/j.solmat.2018.11.004 Lohmüller, 2016, Simplified fabrication of n-type Cz-Si HIP-MWT+ solar cells with 20% efficiency using laser structuring, Energy Procedia, 92, 738, 10.1016/j.egypro.2016.07.052 Pang, 2019, Comparative investigation of performances for HIT-PV and PVT systems, Sol. Energy, 179, 37, 10.1016/j.solener.2018.12.056 Ding, 2019, High-efficiency n-type silicon PERT bifacial solar cells with selective emitters and poly-Si based passivating contacts, Sol. Energy, 193, 494, 10.1016/j.solener.2019.09.085 Dai, 2018, The influence of surface structure on diffusion and passivation in multicrystalline silicon solar cells textured by metal assisted chemical etching (MACE) method, Sol. Energy Mater. Sol. Cell., 186, 42, 10.1016/j.solmat.2018.06.011 Liu, 2019, High-performance texturization of multicrystalline silicon wafer by HF/HNO3/H2O system incorporated with MnO2 particles, Mater. Sci. Semicond. Process., 101, 149, 10.1016/j.mssp.2019.06.003 Huang, 2019, Large-area MACE Si nano-inverted-pyramids for PERC solar cell application, Sol. Energy, 188, 300, 10.1016/j.solener.2019.06.015 Kafle, 2016, On the emitter formation in nanotextured silicon solar cells to achieve improved electrical performances, Sol. Energy Mater. Sol. Cell., 152, 94, 10.1016/j.solmat.2016.03.031 Suh, 2018, Efficient implementation of multiple drive-in steps in thermal diffusion of phosphorus for PERC solar cells, Curr. Appl. Phys., 18, 178, 10.1016/j.cap.2017.11.024 Cui, 2019, The impact of diffusion gettering on solar cell efficiency and light induced degradation, Optik, 181, 129, 10.1016/j.ijleo.2018.12.021 Du, 2015, Performance enhancement of multicrystalline silicon solar cells and modules usingdouble-layered SiNx:H antireflection coatings, Prog. Photovoltaics Res. Appl., 23, 1806, 10.1002/pip.2623 Wu, 2015, Study on the front contact mechanism of screen-printed multi-crystalline silicon solar cells, Sol. Energy Mater. Sol. Cell., 141, 80, 10.1016/j.solmat.2015.05.012 Qin, 2016, Study on the sintering and contact formation process of silver front side metallization pastes for crystalline silicon solar cells, Appl. Surf. Sci., 376, 52, 10.1016/j.apsusc.2016.03.089 Cui, 2016, Emitter doping profiles optimization and correlation with metal contact of multi-crystalline silicon solar cells, Optik, 127, 11230, 10.1016/j.ijleo.2016.08.120 Amalathas, 2017, Efficient light trapping nanopyramid structures for solar cells patterned using UV nanoimprint lithography, Mater. Sci. Semicond. Process., 57, 54, 10.1016/j.mssp.2016.09.032 Kim, 2013, Effects of phosphorus diffusion gettering on minority carrier lifetimes of single-crystalline, multi-crystalline and UMG silicon wafer, Curr. Appl. Phys., 13, 2103, 10.1016/j.cap.2013.09.013 Liu, 2018, Effective impurity gettering by phosphorus- and boron-diffused polysilicon passivating contacts for silicon solar cells, Sol. Energy Mater. Sol. Cell., 179, 136, 10.1016/j.solmat.2017.11.004 Tepner, 2019, Improving wall slip behavior of silver pastes on screen emulsions for fine line screen printing, Sol. Energy Mater. Sol. Cell., 200, 109969, 10.1016/j.solmat.2019.109969 Rahman, 2016, Characterization of recombination properties at diffused surfaces for industrial silicon solar cell concepts, Sol. Energy, 135, 215, 10.1016/j.solener.2016.05.042 Ye, 2019, Optimization of phosphorus dopant profile of industrial p-type mono PERC solar cells, Sol. Energy Mater. Sol. Cell., 190, 30, 10.1016/j.solmat.2018.10.002 Oates, 2018, Effect of diffusion parameters on emitter formation in silicon solar cells by proximity rapid thermal diffusion, Mater. Sci. Semicond. Process., 77, 83, 10.1016/j.mssp.2017.12.006 Lin, 2020, Green-laser-doped selective emitters with separate BBr3 diffusion processes for high-efficiency n-type silicon solar cells, Sol. Energy Mater. Sol. Cell., 210, 110462, 10.1016/j.solmat.2020.110462 Xiao, 2012, Influence of the compensation level on the performance of p-type crystalline silicon solar cells: theoretical calculations and experimental study, Sol. Energy Mater. Sol. Cell., 107, 263, 10.1016/j.solmat.2012.06.046 Cho, 2016, Comparison of POCl3 diffusion and phosphorus ion-implantation induced gettering in crystalline Si solar cells, Sol. Energy Mater. Sol. Cell., 157, 245, 10.1016/j.solmat.2016.05.057 Bentzen, 2009, Overview of phosphorus diffusion and gettering in multicrystalline silicon, Mater. Sci. Eng. B, 159–160, 228, 10.1016/j.mseb.2008.10.060 Lee, 2013, Characteristics of silicon solar cell emitter with a reduced diffused phosphorus inactive layer, Curr. Appl. Phys., 13, 1718, 10.1016/j.cap.2013.06.020 Song, 2016, Low temperature diffusion and its impact on hydrogenation, Sol. Energy Mater. Sol. Cell., 149, 221, 10.1016/j.solmat.2015.11.003 Solmi, 1998, High concentration diffusivity and clustering of arsenic and phosphorus in silicon, J. Appl. Phys., 83, 2484, 10.1063/1.367008 Nobili, 1982, Precipitation as the phenomenon responsible for the electrically inactive phosphorus in silicon, J. Appl. Phys., 53, 1484, 10.1063/1.330646 Schroder, 1978, Free carrier absorption in silicon, IEEE J. Solid State Circ., 25, 254 Chang, 2015, Suppression of uphill diffusion caused by phosphorus deactivation using carbon implantation, Appl. Surf. Sci., 356, 1150, 10.1016/j.apsusc.2015.08.153 Liu, 2009, Atomic mobilities, uphill diffusion and proeutectic ferrite growth in Fe–Mn–C alloys, Calphad Comput. Coupling Phase Diagrams Thermochem., 33, 614, 10.1016/j.calphad.2009.07.002 Jasinski, 2018, Phase separation during mixing of partially miscible fluids under near-critical and supercritical conditions, and the phenomenon of “uphill diffusion”, J. Mol. Struct., 1164, 37, 10.1016/j.molstruc.2018.03.028 Tyschenko, 2009, Endotaxial growth of InSb nanocrystals at the bonding interfaceof the In+ and Sb+ ion implanted SOI structure, Nucl. Instrum. Methods Phys. Res. B, 267, 1360, 10.1016/j.nimb.2009.01.061 Verhoef, 1990, Gettering in polycrystalline silicon solar cells, Mater. Sci. Eng., B7, 49, 10.1016/0921-5107(90)90009-Z