Polyurethane Foams Based on Biopolyols from Castor Oil and Glycerol

Ionescu M (2005) Chemistry and technology of polyols for polyurethanes. Rapra Technology, United Kingdom Mandal BM (2013) Fundamentals of polymerization. World Scientific Publishing Company, Tuke Link Tay G-S, Nanbo T, Hatakeyama H, Hatakeyama T (2011) Polyurethane composites derived from glycerol and molasses polyols filled with oil palm empty fruit bunches studied by TG and DMA. Thermochim Acta 525:190–196 Braun D, Cherdron H, Rehahn M, Ritter H, Volt B (2005) Polymer synthesis: theory and practice: fundamentals, methods, experiments. Springer, New York Al-Moameri H, Zhao Y, Ghoreishi R, Suppes GJ (2016) Simulation blowing agent performance, cell morphology, and cell pressure in rigid polyurethane foams. Ind Eng Chem Res 55:2336–2344 Choe KH, Lee DS, Seo WJ, Kim WN (2004) Properties of rigid polyurethane foams with blowing agents and catalysts. Polym J 36:368–373 Simón D, Borreguero AM, de Lucas A, Rodríguez JF (2015) Valorization of crude glycerol as a novel transesterification agent in the glycolysis of polyurethane foam waste. Polym Degrad Stab 121:126–136 Zieleniewska M, Leszczyński MK, Kurańska M, Prociak A, Szczepkowski L, Krzyżowska M, Ryszkowska J (2015) Preparation and characterisation of rigid polyurethane foams using a rapeseed oil-based polyol. Ind Crops Prod 74:887–897 Güner FS, Yağcı Y, Erciyes AT (2006) Polymers from triglyceride oils. Prog Polym Sci 31:633–670 Kosmela P, Hejna A, Formela K, Haponiuk JT, Piszczyk Ł (2016) Biopolyols obtained via crude glycerol-based liquefaction of cellulose: their structural, rheological and thermal characterization. Cellulose 23:2929–2942. https://doi.org/10.1007/s10570-016-1034-7 Miao S, Wang P, Su Z, Zhang S (2014) Vegetable-oil-based polymers as future polymeric biomaterials. Acta Biomater 10:1692–1704 Hejna A, Kirpluks M, Kosmela P, Cabulis U, Haponiuk J, Piszczyk Ł (2017) The influence of crude glycerol and castor oil-based polyol on the structure and performance of rigid polyurethane-polyisocyanurate foams. Ind Crops Prod 95:113–125 Carriço CS, Fraga T, Pasa VMD (2016) Production and characterization of polyurethane foams from a simple mixture of castor oil, crude glycerol and untreated lignin as bio-based polyols. Eur Polym J 85:53–61 Petrovic ZS, Cvetkovic I, Hong D, Wan X, Zhang W, Abraham T, Malsam J (2008) Polyester polyols and polyurethanes from ricinoleic acid. J Appl Polym Sci 108:1185–1190 Zhang L, Zhang M, Hu L, Zhou Y (2014) Synthesis of rigid polyurethane foams with castor oil-based flame retardant polyols. Ind Crops Prod 52:380–388 Hejna A, Kosmela P, Formela K, Formela K, Piszczyk Ł (2016) Potential applications of crude glycerol in polymer technology-current state and perspectives. Renew Sustain Energy Rev 66:449–475 Gama NV, Silva R, Costa M, Barros-Timmons A, Ferreira A (2016) Statistical evaluation of the effect of formulation on the properties of crude glycerol polyurethane foams. Polym Test 56:200–206 Mamiński M, Parzuchowski PG, Trojanowska A, Dziewulski S (2011) Fast-curing polyurethane adhesives derived from environmentally friendly hyperbranched polyglycerols: the effect of macromonomer structure. Biomass Bioenerg 35:4461–4468 Hu S, Luo X, Wan C, Li Y (2012) Characterization of crude glycerol from biodiesel plants. J Agric Food Chem 60:5915–5921 Li C, Luo X, Li T, Tong X, Li Y (2014) Polyurethane foams based on crude glycerol-derived biopolyols: one-pot preparation of biopolyols with branched fatty acid ester chains and its effects on foam formation and properties. Polymer 55:6529–6538 Zhong N, Li L, Xu X, Cheong LZ, Xu Z, Li B (2013) High yield of monoacylglycerols production through low-temperature chemical and enzymatic glycerolysis. Eur J Lipid Sci Technol 115:684–690 Felizardo P, Machado J, Vergueiro D, Correia MJN, Gomes JP, Bordado JM (2011) Study on the glycerolysis reaction of high free fatty acid oils for use as biodiesel feedstock. Fuel Process Technol 92:1225–1229 Sonntag NOV (1982) Glycerolysis of fats and methyl esters: status, review and critique. J Am Oil Chem Soc 59:795–802 Noureddini H, Medikonduru V (1997) Glycerolysis of fats and methyl esters. J Am Oil Chem Soc 74:419–425 Hu S, Luo X, Li Y (2015) Production of polyols and waterborne polyurethane dispersions from biodiesel-derived crude glycerol. J Appl Polym Sci 132:1–8 Echeverri DA, Rios LA, Rivas BL (2015) Synthesis and copolymerization of thermosetting resins obtained from vegetable oils and biodiesel-derived crude glycerol. Eur Polym J 67:423–438 ASTM D 6584 (2014) Test method for determination of free and total glycerin in B-100 biodiesel methyl esters by gas chromatography1. West Conshohocken, PA Associação Brasileira De Normas Técnicas (2014) NBR 11115: Insumos—Substâncias graxas: Determinação do índice de acidez ASTM D 4274 (2016) Standard test methods for testing polyurethane raw materials: determination of hydroxyl numbers of polyols. West Conshohocken, PA ASTM D 1622/D 1622M-14 (2012) Standard test method for apparent density of rigid cellular plastics1. West Conshohocken, PA ASTM D 2765-01 (2001) Standard test methods for determination of gel content and swell ratio of of crosslinked ethylene plastics1. West Conshohocken, PA Monte Blanco SF, Santos JS, Feltes MM, Dors G, Licodiedoff S, Lerin LA, Olivera D, Ninow JL, Furigo A Jr (2015) Optimization of diacylglycerol production by glycerolysis of fish oil catalyzed by Lipozyme TL IM with Tween 65. Bioprocess Biosyst Eng 38:2379–2388 Ionescu M, Radojčić D, Wan X, Shrestha ML, Petrović ZS, Upshaw TA (2016) Highly functional polyols from castor oil for rigid polyurethanes. Eur Polym J 84:736–749 Stuart BH (2004) Organic molecules. Wiley, Sydney Sánchez-Ferrer A, Rogez D, Martinoty P (2010) Synthesis and characterization of new polyurea elastomers by sol/gel chemistry. Macromol Chem Phys 211:1712–1721 Stirna U, Fridrihsone A, Lazdiņa B, Misāne M, Vilsone D (2013) Biobased polyurethanes from rapeseed oil polyols: structure, mechanical and thermal properties. J Polym Environ 21:952–962 Li S, Bouzidi L, Narine SS (2017) Polyols from self-metathesis-generated oligomers of soybean oil and their polyurethane foams. Eur Polym J 93:232–245