Polymer modified asphalt binders

King, 1999, Additives in asphalt, J Assoc Asphalt Paving Technol A, 68, 32

Bates R, Worch R. Engineering Brief No. 39, Styrene–butadiene rubber latex modified asphalt. Federal Aviation Administration, Washington, DC, 1987. Available from: http://www.faa.gov/arp/engineering/briefs/eb39.htm.

Thompson, 1979

Terrel, 1986, Modified asphalt pavement materials: The European experience, J Assoc Asphalt Paving Technol, 55, 482

Brule, 1996, Polymer-modified asphalt cements used in the road construction industry: Basic principles, Transportat Res Record, 1535

Collins J. Thermoplastic block copolymers for the enhancement of asphaltic binders in paving applications. Presented at the Paving and Transportation Conference, Albuquerque, NM, 1986.

Australian Asphalt Pavement Association. National asphalt specification, 2nd ed. Kew, Australia, 2004.

Hicks RG, Epps JA. Life cycle cost analysis of asphalt–rubber paving materials. In: Proceedings of the First International Conference on the World of Asphalt Pavements, Sydney, Australia, 2000. p. 69–88.

Bahia, 1997, Applicability of Superpave binder testing protocols to modified binders, Transportat Res Record, 1586, 16, 10.3141/1586-03

Sargand SM, Kim SS. Performance evaluation of polymer modified and unmodified Superpave mixes. In: Second International Symposium on Maintenance and Rehabilitation of Pavements and Technological Control, Auburn, AL, 2001.

Sebaaly PE, Bazi GM, Vivekanathan Y. Evaluation of new pavement technologies in Nevada, University of Nevada, 2003.

Newcomb, 2003, Limit the strain at the bottom of an asphalt pavement, and what do you get? A perpetual pavement, Hot Mix Asphalt Technol, 8, 30

Partl MN, Newman JK. Flexural beam fatigue properties of airfield asphalt mixtures containing styrene–butadiene based polymer modifiers. In: Proceedings of the Sixth International Rilem Symposium, Zurich, Switzerland, 2003. p. 357–63.

Bahia, 1998, Classification of asphalt binders into simple and complex binders, J Assoc Asphalt Paving Technol, 67, 1

Chaverot P. The force ductility test: A simple means of characterization of polymer modified asphalt. In: Proceedings of the Fourth Eurobitume Symposium, Madrid, Spain, 1989. p. 96–100.

Blankenship, 1998, Are All PG 70-22’s the same? Lab test on KY I-64 field samples, J Assoc Asphalt Paving Technol (AAPT), 67, 493

Yildirim, 2004, Toner-modified asphalt demonstration projects, vol. 42

Becker, 2001, Polymer modified asphalt, Vis Technol, 9, 39

Camph DH, Siwek S, Forestieri F. How to keep America moving: Report on the US Department of Transportation’s outreach on reauthorization of the Intermodal Surface Transportation Efficiency Act (ISTEA). In: Elles-Boyle A, editor. Office of Governmental Affairs, Washington, DC, 1997.

Blumenthal M. Changes impacting the ground rubber industry. Rubber Manufacturers Association, Montreal, Canada. 2002. Available from: http://www.rubberassociation.ca/pdf_docs/RR2002/Michael2.pdf.

Used Tyre Working Group. Recycling and recovery. No date. Available from: http://www.tyredisposal.co.uk/ disposal_routes.asp.

Wegan V, Nielsen BC. Microstructure of polymer modified binders in bituminous mixtures. Report Number 87-90145-85-8. Danish Road Directorate, Roskilde, Denmark, 2001.

Chen, 2002, Asphalt modified by styrene–butadiene–styrene triblock copolymer: Morphology and model, J Mater Civil Eng, 14, 224, 10.1061/(ASCE)0899-1561(2002)14:3(224)

Mohammed, 2003, Investigation of the use of recycled polymer modified asphalt binder in asphalt concrete pavements (With discussion and closure), J Assoc Asphalt Paving Technol, 72, 551

Roque R, Birgisson B, Tia M, Kim B, Cui Z. Guidelines for the use of modifiers in Superpave mixtures: Executive summary and volume 1 of 3 volumes: Evaluation of SBS modifier. State Job 99052793. Florida Department of Transportation, Tallahassee, FL, 2004.

Shukla, 2003, Polymer modified bitumen for construction of heavy traffic density corridors, Indian Highways, 31, 55

Kim MG, Button JW, Park DW. Coatings to Improve low-quality local aggregates for hot mix asphalt pavements. Report SWUTC/99/167405-1, Texas Transportation Institute, Texas A&M University, College Station, TX, 1999.

DuPont. About DuPont™ Elvaloy® RET reactive elastomeric terpolymer. DuPont website. 2004. Available from: http://www.dupont.com/asphalt/link1.html.

Witczak MW, Hafez I, Qi X. Laboratory characterization of Elvaloy® modified asphalt mixtures: vol. I – Technical report. College Park, Maryland: University of Maryland. 1995. Available from: http://www.dupont.com/asphalt/link5.html.

Chappat, 2000, Appreciation by rheological and tensile tests methods of the impact of ageing of polymer modified binders toward low temperature behaviour, Revue Générale des Routes, 22

Babcock GB, Statz RJ, Larson DS. Study of asphalt binders using lap shear bonds. Wilmington, DE: DuPont™ website. No date. Available from: http://www.dupont.com/asphalt/ lapshear/lapshear.html.

Asphalt Institute. Individual asphalt binder tests. Lexington, KY. 2003. Available from: http://www.asphaltinstitute.org/ai_pages/Lab_Services/Lab_Services_Indiv_Binder_Tests_List.asp.

Hobson K. No date. Elastic recovery testing in Oklahoma. Available from: http://www.utexas.edu/research/ superpave/articles/er.html.

Asphalt forum responses. Asphalt Technology News 2002;14(1):12–13. Available from: http://www.eng.auburn.edu/center/ncat/newsl/newssprng_02.pdf.

Zubeck H, Raad L, Ryer J. Constructability of polymer-modified asphalts and asphalt-aggregate mixtures in Alaska: Final report. Alaska: State of Alaska Department of Transportation and Public Facilities. 1999. Available from: http://www.dot.state.ak.us/stwddes/research/assets/pdf/fhwa_ak_rd_99_1.pdf.

Oliver, 1981, Modification of paving asphalts by digestion with scrap rubber, Transportat Res Record, 821, 37

Oliver JWH. Enhancing bitumen products with scrap rubber. Presented at 19th ARRB Regional Symposium. Vermont South, Australia, 1982. p. 117–31.

Vonk W. Polymer modification of bitumens: Manufacture and application of premium binders for improved spray seal performance. Presented at 10th AAPA International Flexible Pavements Conference, Kew, Australia, 1997.

Valkering CP, Vonk W. Thermoplastic rubbers for the modification of bitumens: Improved elastic recovery for high deformation resistance of asphalt mixes. In: Proceedings of 15th Australian Road Research Board Conference, Vermont South, Australia, 1990. p. 1–19.

Braga V, Corrieri R. A comparative study of SBS and TPO based PMB. In: Proceedings of the Papers Submitted for Review at Second Eurasphalt and Eurobitume Congress, Breukelen, Netherlands, 2000.

Bonemazzi, 1996, Characteristics of polymers and polymer-modified binders, Transportat Res Record, 1535, 36, 10.3141/1535-06

Oliver JWH. Development of PMB specifications for asphalt rut resistance. In: Proceedings of AAPA International Flexible Pavements Conference, vol. I, Kew, Australia, 1997.

Lee DY, Demirel T. Beneficial effects of selected additives on asphalt cement mixes. Final Report. ISU-ERI-Ames-88070 Report Number IDOT Project HR-278. Ames, Iowa: Engineering Research Institute, Iowa State University, 1988.

D’Angelo J. Modified binders and Superpave Plus specifications. Federal Highway Administration. No date. Available from: http://www.asphaltinstitute.org/upload/Modified_Binders_SP_Plus_Specification.pdf.