Polyaniline-Modified TiO2, a Highly Effective Photo-catalyst for Solid-Phase Photocatalytic Degradation of PVC

Journal of Polymers and the Environment - Tập 27 - Trang 784-793 - 2019
Vahid Najafi1, Ebrahim Ahmadi1, Farshid Ziaee2, Hamid Omidian3, Hamid Sedaghat1
1Department of Chemistry, Faculty of Science, University of Zanjan, Zanjan, Iran
2Iran Polymer and Petrochemical Institute (IPPI), Tehran, Iran
3College of Pharmacy, Nova Southeastern University (NSU), Tallahassee, USA

Tóm tắt

A series of polyaniline-modified TiO2 photo-catalysts (TiO2@PANI) were prepared via an in-situ polymerization of aniline onto TiO2 nanoparticles. The Fourier-transform infrared spectroscopy (FT-IR) and thermogravimetric analyses (TGA) confirmed that the polyaniline (PANI) successfully grafted on the TiO2 NPs. The X-ray diffraction (XRD) patterns showed that the crystalline structure of the TiO2 did not change during the preparation of PANI. Photodegradable nanocomposites were prepared by embedding the photocatalysts into the commercial poly(vinyl chloride) (PVC) samples. The nanocomposite films were compared against pure PVC and PVC-TiO2 films for their photodegradation performances. The photocatalytic activity of the TiO2@PANI catalysts improved with an increase in the inorganic/organic molar ratio. With the TiO2 aniline molar ratio of 10, the PVC-TiO2@PANI nanocomposite film lost about 67% of its weight after 720 h irradiation under UV. Meanwhile, the pure PVC and PVC-TiO2 control films lost about 12 and 45% of their initial weights, respectively. Results showed that the rate at which the PVC is photodegraded can be controlled by the amount of the TiO2 NPs as well as the initial TiO2 aniline molar ratio. The SEM micrograms indicated a rougher and more porous surface for the irradiated PVC-TiO2@PANI compared with controls.

Tài liệu tham khảo

Nadia M (2017) Thermogravimetric evaluation of novel antimicrobial phthalimido aromatic 1,3,4-oxadiazole derivatives as stabilizers for rigid PVC. Polym Degrad Stab 146:42–52 Yeong-Tarng S, Hsieh KC, Cheng CC (2017) Carbon nanotubes stabilize poly (vinyl chloride) against thermal degradation. Polym Degrad Stab 144:221–230 Nguyen T, Lee CH, Lee BK, Mallampati SR (2017) Development of hydrophobicity and selective separation of hazardous chlorinated plastics by mild heat treatment after PAC coating and froth flotation. J Hazard Mater 321:193–202 Miao L, Liang Y, Wu Y, Li K (2017) Synergistic effect of complexes of ethylenediamine double maleamic acid radical and lanthanum(III) with pentaerythritol on the thermal stability of poly (vinyl chloride). Polym Degrad Stab 140:176–193 Tomohito K, Imai K, Grause G, Mizoguchi T, Yoshioka T (2009) Kinetics of the dehydrochlorination of poly (vinyl chloride) in the presence of NaOH and various diols as solvents. Polym Degrad Stab 94:1595–1597 Tao Z, Zhou Q, He XL, Wei SD, Wang L, van Kasteren J, Wang YZ (2010) A highly efficient approach for dehydrochlorinating polyvinyl chloride: catalysis by 1-butyl-3-methylimidazolium chloride. Green Chem 12:1062–1065 Xiao-Li H, Zhou Q, Li XY, Yang P, Van Kasteren J, Wang YZ (2012) Dechlorination of poly (vinyl chloride) by 1-butyl-3-methylimidazoliumhydroxide. Polym Degrad Stab 97:145–148 Monzavi A, Montazer M, Malek RMA (2017) A Novel polyester fabric treated with nanoclay/nano TiO2/PAMAM for Discoloration of reactive red 4 from aqueous solution under UVA irradiation. J Polym Environ 25:1321–1334 Zhang Y, Rong W, Fu Y, Ma X (2011) Photocatalytic degradation of poly (vinyl alcohol) on Pt/TiO2 with Fenton reagent. J Polym Environ 19:966–970 Andres Z, Lieberwirth I, Catalina F, Corrales T, Guerrero S, Vasco DA, Zapata PA (2017) Study of the effect of the incorporation of TiO2 nanotubes on the mechanical and photodegradation properties of polyethylenes. Compos Part B 112:66–73 Jawad AH, Nawi MA, Mohamed MH, Wilson LD (2017) Oxidation of chitosan in solution by photocatalysis and product characterization. J Polym Environ 25:828–835 Ho KS, Kwak SY, Suzuki T (2006) Photocatalytic degradation of flexible PVC/TiO2 nanohybrid as an eco-friendly alternative to the current waste landfill and dioxin-emitting incineration of post-use PVC. Polymer 47:3005–3016 Yu R, Chen HZ, Wu G, Wang M (2005) Preparation and characterization of titanium dioxide nanoparticle/polystyrene composites via radical polymerization. Mater Chem Phys 91:370–374 Liuxue Z, Liu P, Su Z (2006) Preparation of PANI–TiO2 nanocomposites and their solid-phase photocatalytic degradation. Polym Degrad Stab 91:2213–2219 Zhao X, Zongwei Li X, Chen Y, Shi L, Zhu Y (2007) Solid-phase photocatalytic degradation of polyethylene plastic under UV and solar light irradiation. J Mol Catal A Chem 268:101–106 De-Zhen S, Yu YY, Xie RR, Zhang CL, Yang Y, Zhai DD, Yang G, Liu L, Yong YC (2017) In-situ growth of graphene/polyaniline for synergistic improvement of extracellular electron transfer in bioelectrochemical systems. Biosens Bioelectron 87:195–202 Rahimeh N, Olad A, Najjari H (2017) Study of the effect of TiO2/polyaniline nanocomposite on the self-cleaning property of polyacrylic latex coating. Surf Coat Technol 316:199–209 Hambirrao PB, Jang K, Lee S, Kim JH, Yoon CS, Kim J, Kim DH (2017) Periodically ordered inverse opal TiO2/polyaniline core/shell design for electrochemical energy storage applications. J Alloys Compd 694:111–118 Sungmin C, Choi W (2001) Solid-phase photocatalytic degradation of PVC–TiO2 polymer composites. J Photochem Photobiol A 143:221–228 Changjun Y, Gong C, Peng T, Deng K, Zan L (2010) High photocatalytic degradation activity of the polyvinyl chloride (PVC)–vitamin C (VC)–TiO2 nano-composite film. J Hazard Mater 178:152–156