Poly(vinylidene fluoride)/polyaniline/carbon nanotubes nanocomposites: Influence of preparation method and oscillatory shear on morphology and electrical conductivity

Muller, 2011, SEBS/PPy.DBSA blends: Preparation and evaluation of electromechanical and dynamic mechanical properties, J. Appl. Polym. Sci., 120, 351, 10.1002/app.33141 Barra, 2008, Thermoplastic elastomer/polyaniline blends: Evaluation of mechanical and electromechanical properties, Polym. Test, 27, 886, 10.1016/j.polymertesting.2008.07.004 Segal, 2005, Chemical sensing materials based on electrically-conductive immiscible polymer blends, Polym. Int., 54, 1065, 10.1002/pi.1810 Malmonge, 2010, Thermal and mechanical properties of PVDF/PANI blends, Mat. Res., 13, 465, 10.1590/S1516-14392010000400007 Ray, 2009, Structure and properties of melt-processed PVDF/PMMA/polyaniline blends, Mater. Chem. Phys., 113, 829, 10.1016/j.matchemphys.2008.08.034 Bliznyuk, 2005, Effects of surface and volume modification of poly(vinylidene fluoride) by polyaniline on the structure and electrical properties of their composites, Polymer, 46, 11728, 10.1016/j.polymer.2005.09.058 Tao, 2011, Influence of nanoparticle–polymer interactions on the apparent migration behaviour of carbon nanotubes in an immiscible polymer blend, Polymer, 52, 4798, 10.1016/j.polymer.2011.08.035 Wu, 2009, Selective localization of multiwalled carbon nanotubes in poly(ε-caprolactone)/polylactide blend, Biomacromolecules, 10, 417, 10.1021/bm801183f Baudouin, 2010, Localization of carbon nanotubes at the interface in blends of polyamide and ethylene–acrylate copolymer, Polymer, 51, 1341, 10.1016/j.polymer.2010.01.050 Baughman, 2002, Carbon nanotubes–the route toward applications, Science, 297, 787, 10.1126/science.1060928 Jeevananda, 2009, Investigation of multi-walled carbon nanotube-reinforced high-density polyethylene/carbon black nanocomposites using electrical, DSC and positron lifetime spectroscopy techniques, Polym. Int., 58, 775, 10.1002/pi.2591 Hu, 2006, Low percolation thresholds of electrical conductivity and rheology in poly(ethylene terephthalate) through the networks of multi-walled carbon nanotubes, Polymer, 47, 480, 10.1016/j.polymer.2005.11.028 Krückel, 2012, Conductivity of polymethylmethacrylate filled with carbon black or carbon fibres under oscillatory shear, Polymer, 53, 395, 10.1016/j.polymer.2011.11.041 Prashantha, 2009, Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: Assessment of rheological and mechanical properties, Comp. Sci. Tech., 69, 1756, 10.1016/j.compscitech.2008.10.005 Martins, 2011, Electrical and rheological percolation in poly(vinylidene fluoride)/multi-walled carbon nanotube nanocomposites, Polym. Int., 60, 430, 10.1002/pi.2965 Baudouin, 2010, Interface localization of carbon nanotubes in blends of two copolymers, Polym. Degr. Stab., 95, 389, 10.1016/j.polymdegradstab.2009.11.007 Sumita, 1992, Double percolation effect on the electrical conductivity of conductive particles filled polymer blends, Colloid. Polym. Sci., 270, 134, 10.1007/BF00652179 Wode, 2012, Selective localization of multi-wall carbon nanotubes in homopolymer blends and a diblock copolymer. Rheological orientation studies of the final nanocomposites, Polymer, 53, 4438, 10.1016/j.polymer.2012.08.004 Yan, 2012, Effect of multiwalled carbon nanotubes on the morphology and electrical properties of polyamide 6/polystyrene blends prepared via successive polymerization, J. Appl. Polym. Sci., 125, E167, 10.1002/app.35680 Soroudi, 2010, Melt blending of carbon nanotubes/polyaniline/polypropylene compounds and their melt spinning to conductive fibres, Synth. Met., 160, 1143, 10.1016/j.synthmet.2010.02.038 Pötschke, 2003, Morphology and electrical resistivity of melt mixed blends of polyethylene and carbon nanotube filled polycarbonate, Polymer, 44, 8061, 10.1016/j.polymer.2003.10.003 Pötschke, 2007, Use of carbon nanotube filled polycarbonate in blends with montmorillonite filled polypropylene, Comp. Sci. Tech., 67, 855, 10.1016/j.compscitech.2006.02.034 Alig, 2012, Establishment, morphology and properties of carbon nanotube networks in polymer melts, Polymer, 53, 4, 10.1016/j.polymer.2011.10.063 Zeiler, 2011, Influence of molar mass and temperature on the dynamics of network formation in polycarbonate/carbon nanotubes composites in oscillatory shear flows, Polymer, 52, 430, 10.1016/j.polymer.2010.11.037 Jamali, 2013, Dispersion and re-agglomeration phenomena during melt mixing of polypropylene with multi-wall carbon nanotubes, Polym. Test, 32, 701, 10.1016/j.polymertesting.2013.03.005 Kharchenko, 2004, Flow-induced properties of nanotube-filled polymer materials, Nat. Mater., 3, 564, 10.1038/nmat1183 Obrzut, 2007, Phys. Rev. B, 76, 1, 10.1103/PhysRevB.76.195420 Martins, 2013, Electrical conductivity of poly(vinylidene fluoride)/polyaniline blends under oscillatory and steady shear conditions, Polym. Test, 32, 862, 10.1016/j.polymertesting.2013.04.001 Gospodinova, 1997, A new route to polyaniline composites, Polymer, 38, 743, 10.1016/S0032-3861(96)00698-2 Deng, 2002, Carbon nanotube–polyaniline hybrid materials, Euro. Polym. J., 38, 2497, 10.1016/S0014-3057(02)00165-9 Garai, 2009, Multiwalled carbon nanotube/polyaniline thermoreversible gel composites, Synth. Met., 159, 1710, 10.1016/j.synthmet.2009.05.011 Zelikman, 2008, Polyaniline/multiwalled carbon nanotube systems: Dispersion of CNT and CNT/PANI interaction, Polym. Eng. Sci., 48, 1872, 10.1002/pen.21208 Graebling, 1993, Linear viscoelasticity of incompatible polymer blends in the melt in relation with interfacial properties, J. Phys. Hayashi, 2001, Dynamic interfacial properties of polymer blends under large step strains: shape recovery of a single droplet, Polymer, 42, 757, 10.1016/S0032-3861(00)00373-6 Takahashi, 2007, Stress prediction for polymer blends with various shapes of droplet phase, Polymer, 48, 2371, 10.1016/j.polymer.2007.02.056