Poly(lactic acid)/biobased polyurethane blends with balanced mechanical strength and toughness

Zhu, 2016, Sustainable polymers from renewable resources, Nature, 540, 354, 10.1038/nature21001 Biswas, 2017, Influence of biobased silica/carbon hybrid nanoparticles on thermal and mechanical properties of biodegradable polymer films, Compos. Commun., 4, 43, 10.1016/j.coco.2017.04.005 Wang, 2017, Progress in toughening poly(lactic acid) with renewable polymers, Polym. Rev., 57, 557, 10.1080/15583724.2017.1287726 Tang, 2017, Effect of poly(ethylene glycol)-polyhedral oligomeric silsesquioxanes on the thermal and mechanical properties of biodegradable poly(L-lactide), Compos. Commun., 3, 11, 10.1016/j.coco.2016.11.003 Long, 2017, Tensile property balanced and gas barrier improved poly(lactic acid) by blending with biobased poly(butylene 2,5-furan dicarboxylate), ACS Sustain. Chem. Eng., 5, 9244, 10.1021/acssuschemeng.7b02196 Sun, 2017, Flame retardant and mechanically tough poly(lactic acid) biocomposites via combining ammonia polyphosphate and polyethylene glycol, Compos. Commun., 6, 1, 10.1016/j.coco.2017.07.005 Auras, 2004, An overview of polylactides as packaging materials, Macromol. Biosci., 4, 835, 10.1002/mabi.200400043 Rosenzweig, 2015, 3D-printed ABS and PLA scaffolds for cartilage and nucleus pulposus tissue regeneration, Int. J. Mol. Sci., 16, 15118, 10.3390/ijms160715118 Lasprilla, 2012, Poly-lactic acid synthesis for application in biomedical devices-A review, Biotechnol. Adv., 30, 321, 10.1016/j.biotechadv.2011.06.019 Qiu, 2016, Non-planar ring contained polyester modifying polylactide to pursue high toughness, Compos. Sci. Technol., 128, 41, 10.1016/j.compscitech.2016.03.014 Liu, 2014, In situ formed crosslinked polyurethane toughened polylactide, Polym. Chem., 5, 2530, 10.1039/c3py01649h Si, 2017, Fully biobased, highly toughened and heat-resistant poly(L-lactide) ternary blends via dynamic vulcanization with poly(D-lactide) and unsaturated bioelastomer, Sci. China Mater., 60, 1008, 10.1007/s40843-017-9111-1 Zeng, 2009, A novel biodegradable multiblock poly(ester urethane) containing poly(L-lactic acid) and poly(butylene succinate) blocks, Polymer, 50, 1178, 10.1016/j.polymer.2009.01.001 Mauck, 2016, Biorenewable tough blends of polylactide and acrylated epoxidized soybean oil compatibilized by a polylactide star polymer, Macromolecules, 49, 1605, 10.1021/acs.macromol.5b02613 Fang, 2014, Supertough polylactide materials prepared through in situ reactive blending with PEG-based diacrylate monomer, ACS Appl. Mater. Interfaces, 6, 13552, 10.1021/am502735q He, 2017, Toughening polylactide by dynamic vulcanization with castor oil and different types of diisocyanates, Polym. Test., 59, 470, 10.1016/j.polymertesting.2017.03.009 Kfoury, 2013, Recent advances in high performance poly(lactide): from “green” plasticization to super-tough materials via (reactive) compounding, Front. Chem., 1, 1, 10.3389/fchem.2013.00032 Ojijo, 2015, Super toughened biodegradable polylactide blends with non-linear copolymer interfacial architecture obtained via facile in situ reactive compatibilization, Polymer, 80, 1, 10.1016/j.polymer.2015.10.038 Zeng, 2015, Compatibilization strategies in poly(lactic acid)-based blends, RSC Adv., 5, 32546, 10.1039/C5RA01655J Liu, 2011, Research progress in toughening modification of poly(- lactic acid), J. Polym. Sci. Part B Polym. Phys., 49, 1051, 10.1002/polb.22283 Liu, 2017, Design of high-performance poly(L-lactide)/elastomer blends through anchoring carbon nanotubes at the interface with the aid of stereocomplex crystallization, Polymer, 108, 38, 10.1016/j.polymer.2016.11.034 Stoclet, 2011, Morphology, thermal behavior and mechanical properties of binary blends of compatible biosourced polymers: polylactide/polyamide11, Polymer, 52, 1417, 10.1016/j.polymer.2011.02.002 Zhao, 2017, High performance and thermal processable dicarboxylic acid cured epoxidized plant oil resins through dynamic vulcanization with poly(lactic acid), ACS Sustain. Chem. Eng., 5, 1938, 10.1021/acssuschemeng.6b02684 Zhao, 2016, Dynamic vulcanization of castor oil in polylactide matrix for toughening, RSC Adv., 6, 79542, 10.1039/C6RA13631A Si, 2018, Tailoring toughness of fully biobased poly(lactic acid)/natural rubber blends through dynamic vulcanization, Polym. Test., 65, 249, 10.1016/j.polymertesting.2017.11.030 Zhao, 2018, Relating chemical structure to toughness via morphology control in fully sustainable sebacic acid cured epoxidized soybean oil toughened polylactide blends, Macromolecules, 51, 2027, 10.1021/acs.macromol.8b00103 Yuan, 2014, Crosslinked bicontinuous biobased PLA/NR blends via dynamic vulcanization using different curing systems, Carbohydr. Polym., 113, 438, 10.1016/j.carbpol.2014.07.044 Yuan, 2014, Crosslinked bicontinuous biobased polylactide/natural rubber materials: super toughness, "net-like"-structure of NR phase and excellent interfacial adhesion, Polym. Test., 38, 73, 10.1016/j.polymertesting.2014.07.004 Chen, 2014, Dynamically vulcanized biobased polylactide/natural rubber blend material with continuous cross-linked rubber phase, ACS Appl. Mater. Interfaces, 6, 3811, 10.1021/am5004766 Liu, 2014, Fully biobased and supertough polylactide-based thermoplastic vulcanizates fabricated by peroxide-induced dynamic vulcanization and interfacial compatibilization, Biomacromolecules, 15, 4260, 10.1021/bm5012739 Yu, 2015, Simultaneously toughening and reinforcing poly(lactic acid)/thermoplastic polyurethane blend via enhancing interfacial adhesion by hydrophobic silica nanoparticles, Polym. Test., 45, 107, 10.1016/j.polymertesting.2015.06.001 Xiu, 2016, Simultaneously reinforcing and toughening of polylactide/carbon fiber composites via adding small amount of soft poly(ether)urethane, Compos. Sci. Technol., 127, 54, 10.1016/j.compscitech.2016.02.025 Bao, 2015, Balanced strength and ductility improvement of in situ crosslinked polylactide/poly(ethylene terephthalate glycol) blends, RSC Adv., 5, 34821, 10.1039/C5RA02575C X.P. An, J.H. Chen, Y.D. Li, J. Zhu, J.B. Zeng, Rational design of sustainable polyurethanes from castor oil: towards simultaneous reinforcement and toughening, Sci. China. Mater. DOI:10.1007/s40843-017-9192-8. Yang, 2016, Isosorbide dioctoate as a "green" plasticizer for poly(lactic acid), Mater. Design, 91, 262, 10.1016/j.matdes.2015.11.065 Johari, 2016, Influence of different treated cellulose fibers on the mechanical and thermal properties of poly(lactic acid), ACS Sustain. Chem. Eng., 4, 1619, 10.1021/acssuschemeng.5b01563