Poly-dimethylsiloxane (PDMS) based micro-reactors for steam reforming of methanol

Kundu, 2007, Micro-fuel cells—current development and applications, Journal of Power Sources, 170, 67, 10.1016/j.jpowsour.2007.03.066 Amphlett, 1994, Hydrogen production by steam reforming of methanol for polymer electrolyte fuel cells, International Journal of Hydrogen Energy, 19, 131, 10.1016/0360-3199(94)90117-1 Pattekar, 2004, A microreactor for hydrogen production in micro-fuel cell applications, Journal of Microelectromechanical Systems, 13, 7, 10.1109/JMEMS.2004.823224 Kundu, 2006, Methanol reforming processes, 1, 417 Pattekar, 2005, A radial microfluidic fuel processor, Journal of Power Sources, 147, 116, 10.1016/j.jpowsour.2005.01.024 Kwon, 2006, Silicon-based miniaturized-reformer for portable fuel cell applications, Journal of Power Sources, 156, 253, 10.1016/j.jpowsour.2005.06.024 Kawamura, 2006, A miniaturized methanol reformer with Si-based microreactor for a small PEMFC, Chemical Engineering Science, 61, 1092, 10.1016/j.ces.2005.08.014 Kim, 2006, Catalyst preparation for fabrication of a MEMS fuel reformer, Chemical Engineering Journal, 123, 93, 10.1016/j.cej.2006.08.010 Park, 2007, Micromachined methanol steam reforming system as a hydrogen supplier for portable proton exchange membrane fuel cells, Sensors and Actuators A, 135, 58, 10.1016/j.sna.2006.07.008 Hwang, 2007, Method of catalyst coating in micro-reactors for methanol steam reforming, Applied Catalysis A: General, 316, 83, 10.1016/j.apcata.2006.09.025 Won, 2006, Performance of micro-channel reactor combined with combustor for methanol steam reforming, Catalysis Today, 111, 158, 10.1016/j.cattod.2005.11.004 Zapf, 2003, Detailed characterization of various porous alumina-based catalyst coatings within microchannels and their testing for methanol steam reforming, Transactions I. ChemE part A, 81, 721, 10.1205/026387603322302887 Park, 2004, Development of microchannel methanol steam reformer, Chemical Engineering Journal, 101, 87, 10.1016/j.cej.2004.01.007 Men, 2004, Parallel screening of Cu/CeO2/γ-Al2O3 catalysts for steam reforming of methanol in a 10-channel micro-structured reactor, Catalysis Communications, 5, 671, 10.1016/j.catcom.2004.08.008 Men, 2004, Steam reforming of methanol over Cu/CeO2/γ-Al2O3 catalysts in a microchannel reactor, Applied Catalysis A: General, 277, 83, 10.1016/j.apcata.2004.08.035 Kundu, 2007, Micro-channel reactor for steam reforming of methanol, Fuel, 86, 1331, 10.1016/j.fuel.2006.08.003 Kundu, 2008, Ahn J E., Park S.-S., Shul Y. G., Han H. S. Process Intensification by Micro-Channel Reactor for Steam Reforming of Methanol, Chemical Engineering Journal, 135, 113, 10.1016/j.cej.2007.02.026 Pfeifer, 2004, PdZn catalysts prepared by washcoating microstructured reactors, Applied Catalysis A: General, 270, 165, 10.1016/j.apcata.2004.04.037 Pfeifer, 2005, Preparation of copper catalyst washcoats for methanol steam reforming in microchannels based on nanoparticles, Applied Catalysis A: General, 286, 175, 10.1016/j.apcata.2005.02.036 de Wild, 2000, Catalytic production of hydrogen from methanol, Catalysis Today, 60, 3, 10.1016/S0920-5861(00)00311-4 Fukuhara, 2004, Catalytic properties of plate-type copper-based catalysts, for steam reforming of methanol, on an aluminum plate prepared by electroless plating, Applied Catalysis A: General, 273, 125, 10.1016/j.apcata.2004.06.034 Shin, 2006, The development of micro-fuel processor using low temperature co-fired ceramic (LTCC), International Journal of Hydrogen Energy, 31, 1925, 10.1016/j.ijhydene.2006.02.028 Lee, 2003, Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices, Analytical Chemistry, 75, 6544, 10.1021/ac0346712 S. J. Metz. Water vapor and gas transport through polymeric membranes. Ph.D. thesis (University of Twente) 2003. Shah, 2003, Novel microfabrication approaches for directly patterning PEM fuel cell membranes, Journal of Power Sources, 123, 172, 10.1016/S0378-7753(03)00538-X Shah, 2004, A PDMS micro proton exchange membrane fuel cell by conventional and non-conventional microfabrication techniques, Sensors and Actuators, B97, 157, 10.1016/j.snb.2003.08.008 Sasoglu, 2007, Design and microfabrication of a high-aspect-ratio PDMS microbeam array for parallel nanonewton force measurement and protein printing, Journal of Micromechanics and Microengineering, 17, 623, 10.1088/0960-1317/17/3/027 Kundu, 2006, MEMS-based micro-fuel processor for application in a cell phone, Journal of Power Sources, 162, 572, 10.1016/j.jpowsour.2006.06.075 Peppley, 1999, Methanol-steam reforming on Cu/ZnO/Al2O3. Part 1: the reaction network, Applied Catalysis A: General, 179, 21, 10.1016/S0926-860X(98)00298-1 Lobato, 2007, Improved polybenzimidazole films for H3PO4-doped PBI-based high temperature PEMFC, Journal of Membrane Science, 306, 47, 10.1016/j.memsci.2007.08.028 Zhang, 2007, Polybenzimidazole-membrane-based PEM fuel cell in the temperature range of 120–200 0C, Journal of Power Sources, 172, 163, 10.1016/j.jpowsour.2007.07.047 Lim, 2005, A plate-type reactor coated with zirconia-sol and catalyst mixture for methanol steam-reforming, Journal of Power Sources, 140, 66, 10.1016/j.jpowsour.2004.08.005 Pfeifer, 2003, Electrically heated microreactors for methanol steam reforming, TransIChemE, 81, 711 Kwon, 2007, Performance of a miniaturized silicon reformer-PrOx-fuel cell system, Journal of Power Sources, 165, 342, 10.1016/j.jpowsour.2006.11.074