Plastic wastes to construction products: Status, limitations and future perspective

Jambeck, 2018, Challenges and emerging solutions to the land-based plastic waste issue in Africa, Mar. Policy, 96, 256, 10.1016/j.marpol.2017.10.041

Singh, 2016, Integrated plastic waste management : environmental and improved health approaches, Procedia Environ. Sci., 35, 692, 10.1016/j.proenv.2016.07.068

EPA, 2015

Lazarevic, 2010, Plastic waste management in the context of a European recycling society: comparing results and uncertainties in a life cycle perspective, Resour. Conserv. Recycl., 55, 246, 10.1016/j.resconrec.2010.09.014

Alassali, 2019, Classification of plastic waste originated from waste electric and electronic equipment based on the concentration of antimony, J. Hazard. Mater., 380, 120874, 10.1016/j.jhazmat.2019.120874

Xanthos, 2017, International policies to reduce plastic marine pollution from single-use plastics (plastic bags and microbeads): A review, Mar. Pollut. Bull., 118, 17, 10.1016/j.marpolbul.2017.02.048

Andrady, 1994, Assessment of environmental biodegradation of synthetic polymers, J. Macromol. Sci. Part C- Polym. Rev., 34, 25, 10.1080/15321799408009632

Swift, 2015, Degradable polymers and plastics in landfill sites, in: encycl, Polym. Sci. Technol., American Cancer Society, 1

Kyrikou, 2007, Biodegradation of agricultural plastic films: a critical review, J. Polym. Environ., 15, 125, 10.1007/s10924-007-0053-8

Mcnicholas, 2019, Stakeholder perceptions of marine plastic waste management in the United Kingdom, Ecol. Econ., 163, 77, 10.1016/j.ecolecon.2019.04.022

Awoyera, 2016, Characterization of ceramic waste aggregate concrete, HBRC J., 14, 282, 10.1016/j.hbrcj.2016.11.003

Hahladakis, 2019, An overview of the challenges and trade-offs in closing the loop of post- consumer plastic waste (PCPW): focus on recycling, J. Hazard. Mater., 380, 10.1016/j.jhazmat.2019.120887

Singh, 2017, Recycling of plastic solid waste : a state of art review and future applications, Compos. Part B Eng., 115, 409, 10.1016/j.compositesb.2016.09.013

Serranti, 2019, 2 - techniques for separation of plastic wastes, 9

Khoo, 2019, Resources, Conservation & Recycling LCA of plastic waste recovery into recycled materials, energy and fuels in Singapore, Resour. Conserv. Recycl., 145, 67, 10.1016/j.resconrec.2019.02.010

Aryan, 2019, Life Cycle Assessment of the existing and proposed plastic waste management options in India : a case study, J. Clean. Prod., 211, 1268, 10.1016/j.jclepro.2018.11.236

Eriksen, 2019, Characterisation of source-separated, rigid plastic waste and evaluation of recycling initiatives : effects of product design and source-separation system, Waste Manag., 87, 161, 10.1016/j.wasman.2019.02.006

Hashem, 2019, Rubber and plastic wastes as alternative refused fuel in cement industry, Constr. Build. Mater., 212, 275, 10.1016/j.conbuildmat.2019.03.316

Awoyera, 2016, Green concrete production with ceramic wastes and laterite, Constr. Build. Mater., 117, 29, 10.1016/j.conbuildmat.2016.04.108

Faraca, 2019, Plastic waste from recycling centres : characterisation and evaluation of plastic recyclability, Waste Manag., 95, 388, 10.1016/j.wasman.2019.06.038

Subramanian, 2000, Plastics recycling and waste management in the US, Resour. Conserv. Recycl., 28, 253, 10.1016/S0921-3449(99)00049-X

Dhawan, 2019, Recycling of plastic waste into tiles with reduced flammability and improved tensile strength, process Saf, Environ. Prot., 124, 299

Hama, 2017, Fresh properties of self-compacting concrete with plastic waste as partial replacement of sand, Int. J. Sustain. Built Environ., 6, 299, 10.1016/j.ijsbe.2017.01.001

Khalid, 2018, Performance of plastic wastes in fiber-reinforced concrete beams, Constr. Build. Mater., 183, 451, 10.1016/j.conbuildmat.2018.06.122

Yin, 2019, Thermo-delamination of metallised composite plastic : an innovative approach to generate Aluminium from packaging plastic waste, J. Clean. Prod., 211, 321, 10.1016/j.jclepro.2018.11.158

Kofi, 2019, Plastic waste to fuel via pyrolysis : a key way to solving the severe plastic waste problem in Ghana, Therm. Sci. Eng. Prog., 11, 417, 10.1016/j.tsep.2019.05.002

Hameed, 2019, Employment the plastic waste to produce the light weight concrete, Energy Procedia, 157, 30, 10.1016/j.egypro.2018.11.160

Pacheco, 2012, Resources, Conservation and Recycling An overview of plastic recycling in Rio de Janeiro, "Resources, Conserv. Recycl., 60, 140, 10.1016/j.resconrec.2011.12.010

Ragaert, 2017, Mechanical and chemical recycling of solid plastic waste, Waste Manag., 69, 24, 10.1016/j.wasman.2017.07.044

Sathanandam, 2017, Low carbon building: experimental insight on the use of fly ash and glass fibre for making geopolymer concrete, Sustain. Environ. Res., 27, 10.1016/j.serj.2017.03.005

Murthi, 2018, Using silica mineral waste as aggregate in a green high strength concrete: workability, strength, failure mode, and morphology assessment, Aust. J. Civ. Eng., 0, 1

Awoyera, 2016, Nonlinear finite element analysis of steel fibre-reinforced concrete beam under static loading, J. Eng. Sci. Technol., 11

Awoyera, 2019, Role of recycling fine materials as filler for improving performance of concrete - a review, Aust. J. Civ. Eng., 0, 1

Adesina, 2018, Overview of the mechanical properties of concrete incorporating waste from the concrete industry as aggregate, J. Curr. Constr. Issues., 3, 23

Choi, 2005, Effects of waste PET bottles aggregate on the properties of concrete, Cem. Concr. Res., 35, 776, 10.1016/j.cemconres.2004.05.014

Hama, 2019, 5 - fresh properties of concrete containing plastic aggregate, in: F. Pacheco-torgal, 85

Silva, 2018

A.A.A. and T. r. Dalal, Concrete Containing Plastic Aggregates, Concr. Int. 19 (n.d.).

J.P. Parviz Soroushian and Siavosh Ravanbakhsh, Assessment of Reinforcing Effects of Recycled Plastic and Paper in Concrete, ACI Mater. J. 100 (n.d.). doi:10.14359/12620.

Z.B. and J. Zeng, Properties of Polypropylene Fiber Reinforced Concrete, ACI Mater. J. 90 (n.d.). doi:10.14359/4439.

Batayneh, 2007, Use of selected waste materials in concrete mixes, Waste Manag., 27, 1870, 10.1016/j.wasman.2006.07.026

Ochi, 2007, Development of recycled PET fiber and its application as concrete-reinforcing fiber, Cem. Concr. Compos., 29, 448, 10.1016/j.cemconcomp.2007.02.002

Silva, 2005, Degradation of recycled PET fibers in Portland cement-based materials, Cem. Concr. Res., 35, 1741, 10.1016/j.cemconres.2004.10.040

2009, B. Yesilata, Y. Isıker, P. Turgut, Thermal insulation enhancement in concretes by adding waste PET and rubber pieces, Constr. Build. Mater., 23, 1878, 10.1016/j.conbuildmat.2008.09.014

Marzouk, 2007, Valorization of post-consumer waste plastic in cementitious concrete composites, Waste Manag., 27, 310, 10.1016/j.wasman.2006.03.012

Salim, 2019, Reinforcement of building plaster by waste plastic and glass, Procedia Struct, Integr., 17, 170

Benson, 1994, Reinforcing sand with strips of reclaimed high-density polyethylene, J. Geotech. Eng., 120, 838, 10.1061/(ASCE)0733-9410(1994)120:5(838)

Choudhary, 2012, Utilization of plastic wastes for improving the sub-grades in flexible pavements, Paving Mater. Pavement Anal.

Choudhary, 2014, Utilization of fly ash and waste recycled product reinforced with plastic wastes as construction materials in flexible pavement

Jha, 2014, Behavior of plastic waste fiber-reinforced industrial wastes in pavement applications, Int. J. Geotech. Eng., 8, 277, 10.1179/1939787914Y.0000000044

Arulrajah, 2017, Recycled plastic granules and demolition wastes as construction materials: resilient moduli and strength characteristics, Constr. Build. Mater., 147, 639, 10.1016/j.conbuildmat.2017.04.178

McQuillen, 1988, Economic analysis of rubber‐modified asphalt mixes, J. Transp. Eng., 114, 10.1061/(ASCE)0733-947X(1988)114:3(259)

Ehrig, 1992

Barlaz, 1993, Framework for assessment of recycle potential applied to plastics, J. Environ. Eng. New York (New York), 119

Yang, 2012, Recycling of composite materials, Chem. Eng. Process. Process Intensif., 51, 53, 10.1016/j.cep.2011.09.007

Awoyera, 2019, Fire resistance and thermal insulation properties of foamed concrete incorporating pulverized ceramics and mineral admixtures, Asian J. Civ. Eng.

Acierno, 2009, Compressive and thermal properties of recycled EPS foams, Polym. Technol. Eng., 49, 13, 10.1080/03602550903282994

Kumi-Larbi, 2018, Recycling waste plastics in developing countries: use of low-density polyethylene water sachets to form plastic bonded sand blocks, Waste Manag., 80, 112, 10.1016/j.wasman.2018.09.003

Akinwumi, 2019, Case Studies in Construction Materials Marine plastic pollution and affordable housing challenge : shredded waste plastic stabilized soil for producing compressed earth bricks, Case Stud. Constr. Mater., 11

Aciu, 2018, Recycling of plastic waste materials in the composition ecological mortars, Procedia Manuf., 22, 274, 10.1016/j.promfg.2018.03.042

1015-18, 1999, Methods of test for mortar for masonry —part 18: determination of water absorption coefficient due to capillary action of hardened mortar, Br. Stand.

Mustafa, 2019, Effect of partial replacement of sand by plastic waste on impact resistance of concrete: experiment and simulation, Structures., 20, 519, 10.1016/j.istruc.2019.06.008