Plasma electrolytic oxidation coatings with particle additions – A review

Yerokhin, 1999, Plasma electrolysis for surface engineering, Surf. Coat. Technol., 122, 73, 10.1016/S0257-8972(99)00441-7

Curran, 2005, Thermo-physical properties of plasma electrolytic oxide coatings on aluminium, Surf. Coat. Technol., 199, 168, 10.1016/j.surfcoat.2004.09.037

Arrabal, 2009, Characterization of AC PEO coatings on magnesium alloys, Surf. Coat. Technol., 203, 2207, 10.1016/j.surfcoat.2009.02.011

Song, 2013, Investigation of a novel self-sealing pore micro-arc oxidation film on AM60 magnesium alloy, J. Magnesium Alloy., 1, 82, 10.1016/j.jma.2013.02.009

Yagi, 2013, Formation of self-repairing anodized film on ACM522 magnesium alloy by plasma electrolytic oxidation, Corros. Sci., 73, 188, 10.1016/j.corsci.2013.03.035

Matykina, 2007, Real-time imaging of coating growth during plasma electrolytic oxidation of titanium, Electrochim. Acta, 53, 1987, 10.1016/j.electacta.2007.08.074

Hussein, 2013, The effect of processing parameters and substrate composition on the corrosion resistance of plasma electrolytic oxidation (PEO) coated magnesium alloys, Surf. Coat. Technol., 237, 357, 10.1016/j.surfcoat.2013.09.021

Barchiche, 2007, Corrosion resistance of plasma-anodized AZ91D magnesium alloy by electrochemical methods, Electrochim. Acta, 53, 417, 10.1016/j.electacta.2007.04.030

Bala Srinivasan, 2009, Effect of current density on the microstructure and corrosion behaviour of plasma electrolytic oxidation treated AM50 magnesium alloy, Appl. Surf. Sci., 255, 4212, 10.1016/j.apsusc.2008.11.008

Hussein, 2011, The effect of current mode and discharge type on the corrosion resistance of plasma electrolytic oxidation (PEO) coated magnesium alloy AJ62, Surf. Coat. Technol., 206, 1990, 10.1016/j.surfcoat.2011.08.060

Aliasghari, 2014, Plasma electrolytic oxidation of titanium in a phosphate/silicate electrolyte and tribological performance of the coatings, Appl. Surf. Sci., 316, 463, 10.1016/j.apsusc.2014.08.037

Dehnavi, 2015, Correlation between plasma electrolytic oxidation treatment stages and coating microstructure on aluminum under unipolar pulsed DC mode, Surf. Coat. Technol., 269, 91, 10.1016/j.surfcoat.2014.11.007

Lv, 2006, Characteristic of ceramic coatings on aluminum by plasma electrolytic oxidation in silicate and phosphate electrolyte, Appl. Surf. Sci., 253, 2947, 10.1016/j.apsusc.2006.06.036

Blawert, 2007, Influence of electrolyte on corrosion properties of plasma electrolytic conversion coated magnesium alloys, Surf. Coat. Technol., 201, 8709, 10.1016/j.surfcoat.2006.07.169

Ghasemi, 2010, The role of anions in the formation and corrosion resistance of the plasma electrolytic oxidation coatings, Surf. Coat. Technol., 204, 1469, 10.1016/j.surfcoat.2009.09.069

Shokouhfar, 2012, Preparation of ceramic coating on Ti substrate by plasma electrolytic oxidation in different electrolytes and evaluation of its corrosion resistance: part II, Appl. Surf. Sci., 258, 2416, 10.1016/j.apsusc.2011.10.064

Necula, 2009, Enrichment of anodic MgO layers with Ag nanoparticles for biomedical applications, J. Mater. Sci. Mater. Med., 20, 339, 10.1007/s10856-008-3589-9

Hanaor, 2012, The effects of carboxylic acids on the aqueous dispersion and electrophoretic deposition of ZrO2, J. Eur. Ceram. Soc., 32, 235, 10.1016/j.jeurceramsoc.2011.08.015

Lee, 2012, Evaluation of plasma temperature during plasma oxidation processing of AZ91 Mg alloy through analysis of the melting behavior of incorporated particles, Electrochim. Acta, 67, 6, 10.1016/j.electacta.2012.01.053

Lee, 2011, Incorporation of multi-walled carbon nanotubes into the oxide layer on a 7075 Al alloy coated by plasma electrolytic oxidation: coating structure and corrosion properties, Curr. Appl. Phys., 11, S55, 10.1016/j.cap.2011.07.009

Guo, 2009, Preparation and performance of a novel multifunctional plasma electrolytic oxidation composite coating formed on magnesium alloy, J. Mater. Sci., 44, 1998, 10.1007/s10853-009-3291-4

Vasilyeva, 2012, Producing and studying oxide coatings containing manganese and nickel compounds on titanium from electrolyte suspensions, Prot. Met. Phys. Chem. Surf., 48, 106, 10.1134/S2070205111050224

Liang, 2007, Preparation and characterization of oxide films containing crystalline TiO2 on magnesium alloy by plasma electrolytic oxidation, Electrochim. Acta, 52, 4836, 10.1016/j.electacta.2007.01.059

Laleh, 2010, Effect of alumina sol addition to micro-arc oxidation electrolyte on the properties of MAO coatings formed on magnesium alloy AZ91D, J. Alloys Compd., 496, 548, 10.1016/j.jallcom.2010.02.098

Tang, 2011, Influence of titania sol in the electrolyte on characteristics of the microarc oxidation coating formed on 2A70 aluminum alloy, Surf. Coat. Technol., 205, 4135, 10.1016/j.surfcoat.2011.02.061

Li, 2012, Discovery of Al2O3 particles incorporation mechanism in plasma electrolytic oxidation of AM60B magnesium alloy, Mater. Lett., 86, 88, 10.1016/j.matlet.2012.07.032

Lim, 2012, Electrochemical corrosion properties of CeO2-containing coatings on AZ31 magnesium alloys prepared by plasma electrolytic oxidation, Corros. Sci., 62, 104, 10.1016/j.corsci.2012.04.043

Li, 2012, Formation of microarc oxidation coatings on magnesium alloy with photocatalytic performance, Appl. Surf. Sci., 258, 10017, 10.1016/j.apsusc.2012.06.066

Wang, 2014, Effects of Al2O3 Nano-additive on performance of micro-arc oxidation coatings formed on AZ91D Mg alloy, J. Mater. Sci. Technol., 30, 984, 10.1016/j.jmst.2014.03.006

Lu, 2016, Plasma electrolytic oxidation coatings on Mg alloy with addition of SiO2 particles, Electrochim. Acta, 187, 20, 10.1016/j.electacta.2015.11.033

Arrabal, 2008, AC plasma electrolytic oxidation of magnesium with zirconia nanoparticles, Appl. Surf. Sci., 254, 6937, 10.1016/j.apsusc.2008.04.100

Matykina, 2008, Incorporation of zirconia nanoparticles into coatings formed on aluminium by AC plasma electrolytic oxidation, J. Appl. Electrochem., 38, 1375, 10.1007/s10800-008-9575-6

Matykina, 2008, Incorporation of zirconia into coatings formed by DC plasma electrolytic oxidation of aluminium in nanoparticle suspensions, Appl. Surf. Sci., 255, 2830, 10.1016/j.apsusc.2008.08.036

Lee, 2011, Electrochemical response of ZrO2-incorporated oxide layer on AZ91 Mg alloy processed by plasma electrolytic oxidation, Surf. Coat. Technol., 205, 3779, 10.1016/j.surfcoat.2011.01.033

Necula, 2009, In vitro antibacterial activity of porous TiO2–Ag composite layers against methicillin-resistant Staphylococcus aureus, Acta Biomater., 5, 3573, 10.1016/j.actbio.2009.05.010

Nasiri Vatan, 2016, Structural, tribological and electrochemical behavior of SiC nanocomposite oxide coatings fabricated by plasma electrolytic oxidation (PEO) on AZ31 magnesium alloy, J. Alloys Compd., 683, 241, 10.1016/j.jallcom.2016.05.096

Kim, 2015, Composite plasma electrolytic oxidation to improve the thermal radiation performance and corrosion resistance on an Al substrate, Appl. Surf. Sci., 357, 1396, 10.1016/j.apsusc.2015.10.003

Sun, 2016, Self-healing plasma electrolytic oxidation coatings doped with benzotriazole loaded halloysite nanotubes on AM50 magnesium alloy, Corros. Sci., 111, 753, 10.1016/j.corsci.2016.06.016

Shokouhfar, 2016, Formation mechanism and surface characterization of ceramic composite coatings on pure titanium prepared by micro-arc oxidation in electrolytes containing nanoparticles, Surf. Coat. Technol., 291, 396, 10.1016/j.surfcoat.2016.03.013

Li, 2006, Electrochemical oxidation characteristic of AZ91D magnesium alloy under the action of silica sol, Surf. Coat. Technol., 201, 1085, 10.1016/j.surfcoat.2006.01.031

Yan, 2008, Corrosion resistance of anodized AZ31 Mg alloy in borate solution containing titania sol, J. Alloys Compd., 463, 458, 10.1016/j.jallcom.2007.09.037

Li, 2006, Preparation of hydrophobic anodic film on AZ91D magnesium alloy in silicate solution containing silica sol, Surf. Coat. Technol., 201, 2573, 10.1016/j.surfcoat.2006.04.068

Zhu, 2008, Influence of silica sol particle behavior on the magnesium anodizing process with different anions addition, Surf. Coat. Technol., 202, 5853, 10.1016/j.surfcoat.2008.06.157

Li, 2006, Effects of silicate concentration on anodic films formed on AZ91D magnesium alloy in solution containing silica sol, Surf. Coat. Technol., 201, 2505, 10.1016/j.surfcoat.2006.04.024

Liu, 2009, Characterization of plasma electrolytic oxidation coatings formed on Mg–Li alloy in an alkaline silicate electrolyte containing silica sol, Mater. Corros., 60, 865, 10.1002/maco.200805204

Necula, 2011, An electron microscopical study on the growth of TiO2–Ag antibacterial coatings on Ti6Al7Nb biomedical alloy, Acta Biomater., 7, 2751, 10.1016/j.actbio.2011.02.037

Seyfoori, 2013, Synthesis of biphasic calcium phosphate containing nanostructured films by micro arc oxidation on magnesium alloy, Mater. Chem. Phys., 142, 87, 10.1016/j.matchemphys.2013.06.045

Arrabal, 2008, Incorporation of zirconia particles into coatings formed on magnesium by plasma electrolytic oxidation, J. Mater. Sci., 43, 1532, 10.1007/s10853-007-2360-9

Matykina, 2009, Investigation of the growth processes of coatings formed by AC plasma electrolytic oxidation of aluminium, Electrochim. Acta, 54, 6767, 10.1016/j.electacta.2009.06.088

Kim, 2009, Formation of hydroxyapatite within porous TiO2 layer by micro-arc oxidation coupled with electrophoretic deposition, Acta Biomater., 5, 2196, 10.1016/j.actbio.2009.02.021

Shin, 2014, Formation of β-tricalcium phosphate coating layer on titanium via micro-arc oxidation, Mater. Res. Innov., 18, 10.1179/1432891714Z.000000000539

Bai, 2011, One-step approach for hydroxyapatite-incorporated TiO2 coating on titanium via a combined technique of micro-arc oxidation and electrophoretic deposition, Appl. Surf. Sci., 257, 7010, 10.1016/j.apsusc.2011.03.058

Lee, 2009, Highly porous titanium (Ti) scaffolds with bioactive microporous hydroxyapatite/TiO2 hybrid coating layer, Mater. Lett., 63, 1995, 10.1016/j.matlet.2009.06.023

Lu, 2015, Insights into plasma electrolytic oxidation treatment with particle addition, Corros. Sci., 101, 201, 10.1016/j.corsci.2015.09.016

Lu, 2016, Investigation of the formation mechanisms of plasma electrolytic oxidation coatings on Mg alloy AM50 using particles, Electrochim. Acta, 196, 680, 10.1016/j.electacta.2016.03.042

Yeung, 2016, Characteristics and in vitro response of thin hydroxyapatite-titania films produced by plasma electrolytic oxidation of Ti alloys in electrolytes with particle additions, RSC Adv., 6, 12688, 10.1039/C5RA22178A

Blawert, 2012, Role of sintering and clay particle additions on coating formation during PEO processing of AM50 magnesium alloy, Surf. Coat. Technol., 213, 48, 10.1016/j.surfcoat.2012.10.013

Rapheal, 2016, Effect of current density on the microstructure and corrosion properties of plasma electrolytic oxidation (PEO) coatings on AM50 Mg alloy produced in an electrolyte containing clay additives, Surf. Coat. Technol., 289, 150, 10.1016/j.surfcoat.2016.01.033

Arrabal, 2015, Characterization and wear behaviour of PEO coatings on 6082-T6 aluminium alloy with incorporated α-Al2O3 particles, Surf. Coat. Technol., 269, 64, 10.1016/j.surfcoat.2014.10.048

Lu, 2015, Degradation behavior of PEO coating on AM50 magnesium alloy produced from electrolytes with clay particle addition, Surf. Coat. Technol., 269, 155, 10.1016/j.surfcoat.2014.11.027

Mohedano, 2015, Silicate-based plasma electrolytic oxidation (PEO) coatings with incorporated CeO2 particles on AM50 magnesium alloy, Mater. Des., 86, 735, 10.1016/j.matdes.2015.07.132

Zhang, 2013, A composite anodizing coating containing superfine Al2O3 particles on AZ31 magnesium alloy, Surf. Coat. Technol., 236, 52, 10.1016/j.surfcoat.2013.04.059

Ma, 2012, Tribological behavior of plasma electrolytic oxidation coatings on the surface of Mg8Li1Al alloy, Tribol. Int., 47, 62, 10.1016/j.triboint.2011.10.006

Wang, 2009, Microstructure and corrosion behavior of coated AZ91 alloy by microarc oxidation for biomedical application, Appl. Surf. Sci., 255, 9124, 10.1016/j.apsusc.2009.06.116

Daroonparvar, 2016, Preparation and corrosion resistance of a nanocomposite plasma electrolytic oxidation coating on Mg-1%Ca alloy formed in aluminate electrolyte containing titania nano-additives, J. Alloys Compd., 688, 841, 10.1016/j.jallcom.2016.07.081

Song, 2012, Effect of TiO2 nanoparticles on the microstructure and corrosion behavior of MAO coatings on magnesium alloy, Mater. Corros., 63, 813, 10.1002/maco.201106251

Srinivasan, 2010, Development of decorative and corrosion resistant plasma electrolytic oxidation coatings on AM50 magnesium alloy, Surf. Eng., 26, 367, 10.1179/174329409X451155

Tang, 2011, Effect of zirconia sol in electrolyte on the characteristics of microarc oxidation coating on AZ91D magnesium, Mater. Lett., 65, 413, 10.1016/j.matlet.2010.09.041

Sreekanth, 2012, Development and characterization of MgO/hydroxyapatite composite coating on AZ31 magnesium alloy by plasma electrolytic oxidation coupled with electrophoretic deposition, Mater. Lett., 68, 439, 10.1016/j.matlet.2011.11.025

Lin, 2014, Effect of preparation parameters on the properties of hydroxyapatite containing micro-arc oxidation coating on biodegradable ZK60 magnesium alloy, Ceram. Int., 40, 10043, 10.1016/j.ceramint.2014.02.104

Lu, 2013, Influence of incorporating Si3N4 particles into the oxide layer produced by plasma electrolytic oxidation on AM50 Mg alloy on coating morphology and corrosion properties, J. Magnesium Alloy., 1, 267, 10.1016/j.jma.2013.11.001

Yu, 2015, An improvement of the wear and corrosion resistances of AZ31 magnesium alloy by plasma electrolytic oxidation in a silicate–hexametaphosphate electrolyte with the suspension of SiC nanoparticles, Surf. Coat. Technol., 276, 266, 10.1016/j.surfcoat.2015.07.014

Ma, 2014, Synthesis and properties of a bio-composite coating formed on magnesium alloy by one-step method of micro-arc oxidation, J. Alloys Compd., 590, 247, 10.1016/j.jallcom.2013.12.145

Wang, 2005, Microarc oxidation coating formed on SiCw/AZ91 magnesium matrix composite and its corrosion resistance, Mater. Lett., 59, 1727, 10.1016/j.matlet.2005.01.050

Arrabal, 2009, Coating formation by plasma electrolytic oxidation on ZC71/SiC/12p-T6 magnesium metal matrix composite, Appl. Surf. Sci., 255, 5071, 10.1016/j.apsusc.2008.12.070

Xue, 2009, Anti-corrosion microarc oxidation coatings on SiCP/AZ31 magnesium matrix composite, J. Alloys Compd., 482, 208, 10.1016/j.jallcom.2009.03.159

Arrabal, 2010, Corrosion behaviour of a magnesium matrix composite with a silicate plasma electrolytic oxidation coating, Corros. Sci., 52, 3738, 10.1016/j.corsci.2010.07.024

Tang, 2010, The effect of titania sol in phosphate electrolyte on microarc oxidation coatings on aluminum alloy, Inter. J. Mod. Phys. B, 24, 3190, 10.1142/S0217979210066306

Bahramian, 2015, An investigation of the characteristics of Al2O3/TiO2 PEO nanocomposite coating, Appl. Surf. Sci., 351, 13, 10.1016/j.apsusc.2015.05.107

Li, 2013, Effects of nano-additive TiO2 on performance of micro-arc oxidation coatings formed on 6063 aluminum alloy, Trans. Nonferrous Metals Soc. China, 23, 406, 10.1016/S1003-6326(13)62477-2

Wang, 2016, The formation mechanism of the composited ceramic coating with thermal protection feature on an Al12Si piston alloy via a modified PEO process, J. Alloys Compd., 682, 357, 10.1016/j.jallcom.2016.04.195

Malyshev, 2007, Features of microarc oxidation coatings formation technology in slurry electrolytes, Appl. Surf. Sci., 254, 1511, 10.1016/j.apsusc.2007.07.079

Hu, 2014, Preparation of ceramic coatings on an Al–Si alloy by the incorporation of ZrO2 particles in microarc oxidation, Surf. Coat. Technol., 258, 275, 10.1016/j.surfcoat.2014.09.012

Jin, 2006, Improvement of surface porosity and properties of alumina films by incorporation of Fe micrograins in micro-arc oxidation, Appl. Surf. Sci., 253, 863, 10.1016/j.apsusc.2006.01.024

Yürektürk, 2015, Characterization of micro arc oxidized 6082 aluminum alloy in an electrolyte containing carbon nanotubes, Surf. Coat. Technol., 269, 83, 10.1016/j.surfcoat.2014.12.058

Kim, 2015, Heat dissipation properties of oxide layers formed on 7075 Al alloy via plasma electrolytic oxidation, Surf. Coat. Technol., 269, 114, 10.1016/j.surfcoat.2015.01.059

Wu, 2008, Self-lubricative coating grown by micro-plasma oxidation on aluminum alloys in the solution of aluminate–graphite, Appl. Surf. Sci., 254, 6395, 10.1016/j.apsusc.2008.04.001

Yang, 2010, Effects of current density on the microstructure and the corrosion resistance of alumina coatings embedded with SiC nano-particles produced by micro-arc oxidation, J. Mater. Sci. Technol., 26, 1016, 10.1016/S1005-0302(10)60167-3

Ma, 2014, Preparation of self-lubricating composite coatings through a micro-arc plasma oxidation with graphite in electrolyte solution, Surf. Coat. Technol., 259, 318, 10.1016/j.surfcoat.2014.03.004

Mu, 2013, One-step preparation of TiO2/MoS2 composite coating on Ti6Al4V alloy by plasma electrolytic oxidation and its tribological properties, Surf. Coat. Technol., 214, 124, 10.1016/j.surfcoat.2012.10.079

Wu, 2010, Effects of additives on corrosion and wear resistance of micro-arc oxidation coatings on TiAl alloy, Trans. Nonferrous Metals Soc. China, 20, 1032, 10.1016/S1003-6326(09)60253-3

Sarbishei, 2014, Study plasma electrolytic oxidation process and characterization of coatings formed in an alumina nanoparticle suspension, Vacuum, 108, 12, 10.1016/j.vacuum.2014.05.008

Aliofkhazraei, 2016, Ceria embedded nanocomposite coating fabricated by plasma electrolytic oxidation on titanium, J. Alloys Compd., 685, 376, 10.1016/j.jallcom.2016.05.315

Vasil'eva, 2010, Producing and investigating oxide coatings containing manganese and nickel compounds on titanium from electrolyte suspensions, Prot. Met. Phys. Chem. Surf., 46, 593, 10.1134/S2070205110050163

Yao, 2014, Microstructure and antibacterial properties of Cu-doped TiO2 coating on titanium by micro-arc oxidation, Appl. Surf. Sci., 292, 944, 10.1016/j.apsusc.2013.12.083

Mu, 2012, Preparation and tribological properties of self-lubricating TiO2/graphite composite coating on Ti6Al4V alloy, Appl. Surf. Sci., 258, 8570, 10.1016/j.apsusc.2012.05.051

Samanipour, 2011, Innovative fabrication of ZrO2–HAp–TiO2 nano/micro-structured composites through MAO/EPD combined method, Mater. Lett., 65, 926, 10.1016/j.matlet.2010.11.039

Jiang, 2011, Micro-arc oxidation of TC4 substrates to fabricate TiO2/YAG:Ce3+ compound films with enhanced photocatalytic activity, J. Alloys Compd., 509, L137, 10.1016/j.jallcom.2010.12.131

Matykina, 2006, Spark anodising of titanium for biomedical applications, Trans. IMF, 84, 125, 10.1179/174591906X123967

Whiteside, 2010, In vitro evaluation of cell proliferation and collagen synthesis on titanium following plasma electrolytic oxidation, J. Biomed. Mater. Res. A, 94a, 38, 10.1002/jbm.a.32664

Mohedano, 2013, Bioactive plasma electrolytic oxidation coatings-the role of the composition, microstructure, and electrochemical stability, J. Biomed. Mater. Res. B, 101, 1524, 10.1002/jbm.b.32974

Mohedano, 2014, Metal release from ceramic coatings for dental implants, Dent. Mater., 30, E28, 10.1016/j.dental.2013.12.011

Cimenoglu, 2011, Micro-arc oxidation of Ti6Al4V and Ti6Al7Nb alloys for biomedical applications, Mater. Charact., 62, 304, 10.1016/j.matchar.2011.01.002

Yang, 2010, Effects of current frequency on the microstructure and wear resistance of ceramic coatings embedded with SiC nano-particles produced by micro-arc oxidation on AZ91D magnesium alloy, J. Mater. Sci. Technol., 26, 865, 10.1016/S1005-0302(10)60138-7

Balaji, 2006, Electrodeposition of bronze-PTFE composite coatings and study on their tribological characteristics, Surf. Coat. Technol., 201, 3205, 10.1016/j.surfcoat.2006.06.039

Shin, 2006, Formation of titania photocatalyst films by microarc oxidation of Ti and Ti–6Al–4V alloys, Electrochem. Commun., 8, 465, 10.1016/j.elecom.2006.01.003

Zhong, 2011, Tailored Al2O3/ZrO2 composite oxide layers by bipolar current adjustment in the plasma electrolytic oxidation (PEO) process, Nanosci. Nanotechnol. Lett., 3, 209, 10.1166/nnl.2011.1150

Luo, 2013, Preparation and characterization of ZrO2/TiO2 composite photocatalytic film by micro-arc oxidation, Trans. Nonferrous Metals Soc. China, 23, 2945, 10.1016/S1003-6326(13)62818-6

Soejima, 2011, One-pot synthesis and photocatalytic activity of Fe-doped TiO2 films with anatase–rutile nanojunction prepared by plasma electrolytic oxidation, J. Mater. Sci., 46, 5378, 10.1007/s10853-011-5476-x

Rudnev, 2012, The effect of the conditions of formation on ferromagnetic properties of iron-containing oxide coatings on titanium, Prot. Met. Phys. Chem. Surf., 48, 543, 10.1134/S2070205112050097

Gnedenkov, 2012, Magnetic properties of surface layers formed on titanium by plasma electrolytic oxidation, Inorg. Mater. Appl. Res., 3, 151, 10.1134/S2075113312020062

Bai, 2011, In situ composite coating of titania–hydroxyapatite on titanium substrate by micro-arc oxidation coupled with electrophoretic deposition processing, Mater. Sci. Eng. B, 176, 1213, 10.1016/j.mseb.2011.06.019

Bai, 2010, Formation of bioceramic coatings containing hydroxyapatite on the titanium substrate by micro-arc oxidation coupled with electrophoretic deposition, J. Biomed. Mater. Res. B, 95B, 365, 10.1002/jbm.b.31724

Shin, 2010, Influence of zirconia on biomimetic apatite formation in pure titanium coated via plasma electrolytic oxidation, Mater. Lett., 64, 2714, 10.1016/j.matlet.2010.08.069

Shin, 2012, Surface characteristics of ZrO2-containing oxide layer in titanium by plasma electrolytic oxidation in K4P2O7 electrolyte, J. Alloys Compd., 536, S226, 10.1016/j.jallcom.2011.11.037

Shin, 2015, Development of titanium oxide layer containing nanocrystalline zirconia particles with tetragonal structure: structural and biological characteristics, Colloid. Surf. B, 131, 47, 10.1016/j.colsurfb.2015.03.047

Atiyeh, 2007, Effect of silver on burn wound infection control and healing: review of the literature, Burns, 33, 139, 10.1016/j.burns.2006.06.010

Teker, 2015, Characteristics of multi-layer coating formed on commercially pure titanium for biomedical applications, Mater. Sci. Eng. C, 48, 579, 10.1016/j.msec.2014.12.058

Burg, 2000, Biomaterial developments for bone tissue engineering, Biomaterials, 21, 2347, 10.1016/S0142-9612(00)00102-2

Hannink, 1983, Microstructural development of sub-eutectoid aged MgO-ZrO2 alloys, J. Mater. Sci., 18, 457, 10.1007/BF00560635

Fukumasa, 2003, Spraying of MgO films with a well-controlled plasma jet, Surf. Coat. Technol., 169, 579, 10.1016/S0257-8972(03)00106-3

Galliano, 1998, Sol-gel coatings on 316L steel for clinical applications, J. Sol-Gel Sci. Technol., 13, 723, 10.1023/A:1008653208083

Vasconcelos, 2000, Corrosion resistance of stainless steel coated with sol-gel silica, J. Non-Cryst. Solids, 273, 135, 10.1016/S0022-3093(00)00155-1

Wang, 2009, Sol–gel coatings on metals for corrosion protection, Prog. Org. Coat., 64, 327, 10.1016/j.porgcoat.2008.08.010

Khazrayie, 2010, Si3N4/Ni nanocomposite formed by electroplating: effect of average size of nanoparticulates, Trans. Nonferrous Metals Soc. China, 20, 1017, 10.1016/S1003-6326(09)60251-X

Pepe, 2006, Cerium hybrid silica coatings on stainless steel AISI 304 substrate, J. Sol-Gel Sci. Technol., 39, 131, 10.1007/s10971-006-9173-1

Schem, 2009, CeO2-filled sol–gel coatings for corrosion protection of AA2024-T3 aluminium alloy, Corros. Sci., 51, 2304, 10.1016/j.corsci.2009.06.007

Bhatt, 2008, Impact resistance of environmental barrier coated SiC/SiC composites, Mater. Sci. Eng. A, 476, 8, 10.1016/j.msea.2007.04.067

Czosnek, 2015, Preparation of silicon carbide SiC-based nanopowders by the aerosol-assisted synthesis and the DC thermal plasma synthesis methods, Mater. Res. Bull., 63, 164, 10.1016/j.materresbull.2014.12.003

Hou, 2002, Tribological performances of diamond film and graphite/diamond composite film, Wear, 253, 711, 10.1016/S0043-1648(02)00164-3

Dorozhkin, 2009, Calcium orthophosphates in nature, biology and medicine, Materials, 2, 399, 10.3390/ma2020399

Rudnev, 2015, The effect of nanocrystallites in the pores of PEO coatings on their magnetic properties, Surf. Coat. Technol., 269, 23, 10.1016/j.surfcoat.2015.01.073

Hang, 2014, Antibacterial activity and cytocompatibility of Cu-Ti-O nanotubes, J. Biomed. Mater. Res. A, 102, 1850, 10.1002/jbm.a.34847