Pistoning assessment in lower limb prosthetic sockets

Klute, 2010, Prosthetic liners for lower limb amputees: a review of the literature, Prosthet Orthot Int, 34, 146, 10.3109/03093641003645528

Beattie, 2001, Orthotics and prosthetics in rehabilitation, J Prosthet Orthot, 13, 21, 10.1097/00008526-200103000-00014

Wirta, 1990, Analysis of below-knee suspension systems: effect on gait, J Rehabil Res Dev, 27, 385, 10.1682/JRRD.1990.10.0385

Baars, 2005, Literature review of the possible advantages of silicon liner socket use in trans-tibial prostheses, Prosthet Orthot Int, 29, 27, 10.1080/17461550500069612

Stiefel, 2009, The positive effect of negative pressure: vacuum-assisted fixation of Integra artificial skin for reconstructive surgery, J Pediatr Surg, 44, 575, 10.1016/j.jpedsurg.2008.07.006

Webster, 2009, Perceptions and acceptance of osseointegration among individuals with lower limb amputations: a prospective survey study, J Prosthet Orthot, 21, 215, 10.1097/JPO.0b013e3181bfafba

Arndt, 2011, Use of a Partial Foot Prosthesis with Vacuum-Assisted Suspension: A Case Study, J Prosthet Orthot, 23, 82, 10.1097/JPO.0b013e318217e5f7

Ferraro, 2011, Outcomes study of transtibial amputees using elevated vacuum suspension in comparison with pin suspension, J Prosthet Orthot, 23, 78, 10.1097/JPO.0b013e3182173b83

Kristinsson, 1993, The ICEROSS concept: a discussion of a philosophy, Prosthet Orthot Int, 17, 49, 10.3109/03093649309164354

McCurdie, 1997, ICEROSS-a consensus view: a questionnaire survey of the use of ICEROSS in the United Kingdom, Prosthet Orthot Int, 21, 124, 10.3109/03093649709164540

Isozaki, 2006, CAD/CAM Evaluation of the fit of trans-tibial sockets for trans-tibial amputation stumps, J Med Dent Sci, 53, 51

Andrysek, 2010, Lower-limb prosthetic technologies in the developing world: a review of literature from 1994 to 2010, Prosth Orth Int, 34, 378, 10.3109/03093646.2010.520060

Fillauer, 1989, Evolution and development of the Silicone Suction Socket (3S) for below-knee prostheses, J Prosthet Orthot, 1, 92, 10.1097/00008526-198901000-00007

Datta, 1996, Outcome of fitting an ICEROSS prosthesis: views of trans-tibial amputees, Prosthet Orthot Int, 20, 111, 10.3109/03093649609164427

Legro, 1999, Issues of importance reported by persons with lower limb amputations and prostheses, J Rehabil Res Dev, 36, 155

Heim, 1997, Silicone suspension of external prostheses. A new era in artificial limb usage, J Bone Joint Surg Br, 79, 638, 10.1302/0301-620X.79B4.0790638

Newton, 1988, Radiological evaluation of prosthetic fit in below-the-knee amputees, Skeletal Radiol, 17, 276, 10.1007/BF00401811

Grevsten, 1978, Ideas on the suspension of the below-knee prosthesis, Prosthet Orthot Int, 2, 3, 10.3109/03093647809146289

Narita, 1997, Suspension effect and dynamic evaluation of the total surface bearing (TSB) trans-tibial prosthesis: a comparison with the patellar tendon bearing (PTB) trans-tibial prosthesis, Prosthet Orthot Int, 21, 175, 10.3109/03093649709164551

Kapp, 1999, Suspension systems for prostheses, Clin Orthop, 361, 55, 10.1097/00003086-199904000-00008

Dillingham, 2001, Use and satisfaction with prosthetic devices among persons with trauma-related amputations: a long-term outcome study, Am J Phys Med Rehabil, 80, 563, 10.1097/00002060-200108000-00003

Schmalz, 2002, Energy expenditure and biomechanical characteristics of lower limb amputee gait: The influence of prosthetic alignment and different prosthetic components, Gait Posture, 16, 255, 10.1016/S0966-6362(02)00008-5

Geertzen, 2006, Skin problems in lower limb amputees: A systematic review, Disabil Rehabil, 28, 603, 10.1080/09638280500277032

Meulenbelt, 2006, Skin problems in lower limb amputees: A systematic review, Disabil Rehabil, 28, 603, 10.1080/09638280500277032

Bruno, 2009, Improper use of a transtibial prosthesis silicone liner causing pressure ulceration, Am J Phys Med Rehabil, 88, 264, 10.1097/PHM.0b013e31818dfdc9

Trieb, 1999, Silicone soft socket system: Its effect on the rehabilitation of geriatric patients with transfemoral amputations, Arch Phys Med Rehab, 80, 522, 10.1016/S0003-9993(99)90192-2

Commean, 1997, Lower extremity residual limb slippage within the prosthesis, Arch Phys Med Rehabil, 78, 476, 10.1016/S0003-9993(97)90160-X

Madsen, 2000, A device for applying static loads to prosthetic limbs of transtibial amputees during spiral examination, J Rehabil Res Dev, 37, 383

Sanders, 2006, A noncontact sensor for measurement of distal residual-limb position during walking, J Rehabil Res Dev, 43, 509, 10.1682/JRRD.2004.11.0143

Söderberg, 2003, Roentgen stereophotogrammetric analysis of motion between the bone and the socket in a transtibial amputation prosthesis: a case study, J Prosthet Orthot, 15, 95, 10.1097/00008526-200307000-00008

Papaioannou, 2010, Assessment of internal and external prosthesis kinematics during strenuous activities using dynamic roentgen stereophotogrammetric analysis, J Prosthet Orthot, 22, 91, 10.1097/JPO.0b013e3181cca7bb

Abu Osman, 2010, Transducers for the determination of the pressure and shear stress distribution at the stump–socket interface of trans-tibial amputees, P I Mech Eng B, 224, 1239, 10.1243/09544054JEM1820

Naeff, 1980, Dynamic pressure measurements at the interface between residual limb and socket-the relationship between pressure distribution, comfort, and brim shape, Bull Prosthet Res, 10, 35

Van Pijkeren, 1980, A new method for the measurement of normal pressure between amputation residual limb and socket, Bull Prosthet Res, 10, 31

Lee, 1997, Stump-socket interface pressure as an aid to socket design in prostheses for trans-femoral amputees- a preliminary study, P I Mech Eng H, 211, 167, 10.1243/0954411971534287

Convery, 1998, Conventional patellar-tendon-bearing (PTB) socket/stump interface dynamic pressure distributions recorded during the prosthetic stance phase of gait of a transtibial amputee, Prosthet Orthot Int, 22, 193, 10.3109/03093649809164484

Zhang, 1998, Finite element modelling of a residual lower-limb in a prosthetic socket: a survey of the development in the first decade, Med Eng Phys, 20, 360, 10.1016/S1350-4533(98)00027-7

Convery, 1999, Socket/stump interface dynamic pressure distributions recorded during the prosthetic stance phase of gait of a trans-tibial amputee wearing a hydrocast socket, Prosthet Orthot Int, 23, 107, 10.3109/03093649909071621

Sanders, 1993, Clinical measurement of normal and shear stresses on a trans-tibial stump: characteristics of wave-form shapes during walking, Prosthet Orthot Int, 17, 38, 10.3109/03093649309164353

Sanders, 1995, Interface mechanics in external prosthetics: review of interface stress measurement techniques, Med Biol Eng Comput, 33, 509, 10.1007/BF02522507

Sanders, 1998, Effects of alignment changes on stance phase pressures and shear stresses on transtibial amputees: measurements from 13 transducer sites, IEEE Trans. Rehabil. Eng, 6, 21, 10.1109/86.662617

Sanders, 1999, Interface pressures and shear stresses: sagittal plane angular alignment effects in three trans-tibial amputee case studies, Prosthet Orthot Int, 23, 21, 10.3109/03093649909071607

Zhang, 1996, A finite element analysis of the load transfer between an above-knee residual limb and its prosthetic socket-roles of interface friction and distal-end boundary conditions, IEEE Trans Rehabi. Eng, 4, 337, 10.1109/86.547935

Zhang, 1996, Frictional action at residual limb/prosthetic socket interface, Med Eng Phys, 18, 207, 10.1016/1350-4533(95)00038-0

Mak, 2001, State-of-the-art research in lower-limb prosthetic biomechanics-socket interface: A review, J Rehabil Res Dev, 38, 161

Yigiter, 2002, Comparison of the effects of patellar tendon bearing and total surface bearing sockets on prosthetic fitting and rehabilitation, Prosthet Orthot Int, 26, 206, 10.1080/03093640208726649

Bocobo, 1998, Videofluoroscopic evaluation of prosthetic fit and residual limbs following transtibial amputation, J Rehabil Res Dev, 35, 6

Tanner, 2001, Radiographic comparison of vertical tibial translation using two types of suspensions on a transtibial prosthesis: a case study, J Prosthet Orthot, 13, 14, 10.1097/00008526-200103000-00012

Grevsten, 1975, A roentgenological study of the stump-socket contact and skeletal displacement in the PTB-Suction Prosthesis, Ups J Med Sci, 80, 49, 10.3109/03009737509178991

Convery, 2000, Ultrasound study of the motion of the residual femur within a trans-femoral socket during gait, Prosthet Orthot Int, 24, 226, 10.1080/03093640008726552

Board, 2001, A comparison of trans-tibial amputee suction and vacuum socket conditions, Prosthet Orthot Int, 25, 202, 10.1080/03093640108726603

Lilja, 1993, Movement of the tibial end in a PTB prosthesis socket: a sagittal X-ray study of the PTB prosthesis, Prosthet Orthot Int, 17, 21, 10.3109/03093649309164351

Murray, 2000, The calibration of ultrasound transducers used to monitor motion of the residual femur within a trans-femoral socket during gait, Prosthet Orthot Int, 24, 55, 10.1080/03093640008726522

Eshraghi, 2011, Comments on Assessment of amputee socket-stump-residual bone kinematics during strenuous activities using Dynamic Roentgen Stereogrammetric Analysis, J Biomech, 44, 2851, 10.1016/j.jbiomech.2011.05.042

Goswami, 2003, Walking in a vacuum-assisted socket shifts the stump fluid balance, Prosthet Orthot Int, 27, 107, 10.1080/03093640308726666

Kendall, 1992, Mortality and occupational exposure to radiation: first analysis of the National Registry for Radiation Workers, BMJ, 304, 220, 10.1136/bmj.304.6821.220

Doke, 2005, Mechanics and energetics of swinging the human leg, J Exp Biol, 208, 439, 10.1242/jeb.01408

Sanders, 1995, Skin response to mechanical stress: adaptation rather than breakdown—a review of the literature, J Rehabil Res Dev, 32, 214