Phosphogypsum as a construction material

Journal of Cleaner Production - Tập 166 - Trang 732-743 - 2017
Alaa M. Rashad1
1Building Materials Research and Quality Control Institute, Housing & Building National Research Center (HBRC), Cairo, Egypt

Tóm tắt

Từ khóa


Tài liệu tham khảo

Abdelhadi, 2014, The characteristics of cement mortars utilizes the untreated phosphogypsum wastes generated from fertilizer plant, Aqaba-Jordan, Jordan J. Earth Environ. Sci. (JJEES), 6, 61

Ajam, 2009, Characterization of the Tunisian phosphogypsum and its valorization in clay bricks, Constr. Build. Mater., 23, 3240, 10.1016/j.conbuildmat.2009.05.009

Al-Hwaiti, 2015, Assessment of the radiological impacts of treated phosphogypsum used as the main constituent of building materials in Jordan, Environ. Earth Sci., 74, 3159, 10.1007/s12665-015-4354-2

Alam, 2015, Partial replacement of cement by phosphogypsum in concrete, North Asian Int. Res. J. Sci. Eng. I.T., 1, 1

Altun, 2004, Utilization of weathered phosphogypsum as set retarder in Portland cement, Cem. Concr. Res., 34, 677, 10.1016/j.cemconres.2003.10.017

Aly, 1999, Recovery of lanthanides from Abu Tartur phosphate rock, Egypt. Hydrometall., 52, 199, 10.1016/S0304-386X(99)00018-3

Bagade, 2012, An experimental investigation of partial replacement of cement by various percentage of phosphogypsum in cement concrete, Int. J. Eng. Res. Appl. (IJERA), 2, 785

Belz, 1994, Development of cementitious products using industrial process wastes as sources of reactive sulfate and alumina, Environ. Aspects Constr. Waste Mater., 579

Bhadauria, 2006, Utilisation of phosphogypsum in cement mortar and concrete

Bolivar, 2000, Radioecological study of an estuarine system located in the south of Spain, Water Res., 34, 2941, 10.1016/S0043-1354(99)00370-X

Bouchhima, 2013, Engineering properties of wade sand-lime-cement-phosphogypsum building brick grade MW, Int. J. Eng. Adv. Technol. (IJEAT), 2, 43

Buhari, 2016, Flexural behavior of ternary blended concrete containing silica fume and phosphogypsum, Int. J. Sci. Technol. Eng. (IJSTE), 3, 9

Campos, 2017, Phosphogypsum recycling in the building materials industry: assessment of the radon exhalation rate, J. Environ. Radioact., 172, 232, 10.1016/j.jenvrad.2017.04.002

Deepak, 2016, Experimental investigation on strength characteristics of concrete with phosphogypsum and FRP bars, Int. Res. J. Eng. Technol. (IRJET), 3, 1146

Değirmenci, 2008, Utilization of phosphogypsum as raw and calcined material in manufacturing of building products, Constr. Build. Mater., 22, 1857, 10.1016/j.conbuildmat.2007.04.024

Değirmenci, 2007, Usability of fly ash phosphogypsum in manufacturing of building products, J. Eng. Sci., 2, 273

El-Didamony, 2012, Treatment of phosphogypsum waste using suitable organic extractants, J. Radioanal. Nucl. Chem., 291, 907, 10.1007/s10967-011-1547-3

Gaidučis, 2011, Resistance of phosphogypsum cement pozzolanic compositions against the influence of water, Mater. Sci., 17, 308

García-Díaz, 2016, Characterization and valorization of norm wastes for construction materials, 13

Garg, 1996, Some aspects of the durability of a phosphogypsum-lime-fly ash binder, Constr. Build. Mater., 10, 273, 10.1016/0950-0618(95)00085-2

Garg, 2011, Environment hazard mitigation of waste gypsum and chalk: use in construction materials, Constr. Build. Mater., 25, 944, 10.1016/j.conbuildmat.2010.06.088

Garg, 2016, Modifications in water resistance and engineering properties of β-calcium sulphate hemihydrate plaster-superplasticizer blends, Mater. Struct., 49, 3253, 10.1617/s11527-015-0717-0

Godinho-Castro, 2012, Incorporation of gypsum waste in ceramic block production: proposal for a minimal battery of tests to evaluate technical and environmental viability of this recycling process, Waste Manag., 32, 153, 10.1016/j.wasman.2011.08.019

Hentati, 2015, Phosphogypsum as a soil fertilizer: ecotoxicity of amended soil and elutriates to bacteria, invertebrates, algae and plants, J. Hazard. Mater., 294, 80, 10.1016/j.jhazmat.2015.03.034

Hua, 2016, Effects of fibers on mechanical properties and freeze-thaw resistance of phosphogypdum-slag based cementitious materials, Constr. Build. Mater., 121, 290, 10.1016/j.conbuildmat.2016.06.003

Huang, 2010, Effect of sodium hydroxide on the properties of phosphogypsum based cement, J. Wuhan Univ. Technol. Mater Sci. Ed., 25, 342, 10.1007/s11595-010-3342-7

Huang, 2010, Investigation on phosphogypsum-steel slag-granulated blast-furnace slag-limestone cement, Constr. Build. Mater., 24, 1296, 10.1016/j.conbuildmat.2009.12.006

Huang, 2011, A binder of phosphogypsum-ground granulated blast furnace slag-ordinary Portland cement, J. Wuhan Univ. Technol. Mater. Sci. Ed., 26, 548, 10.1007/s11595-011-0265-6

Huang, 2016, The chloride permeability of persulphated phosphogypsum-slag cement concrete, J. Wuhan Univ. Technol. Mater. Sci. Ed., 1031, 10.1007/s11595-016-1486-5

IAEA-International Atomic Energy Agency, 2013, Radiation protection and management of norm residues in the phosphate industry

Kadirova, 2014, Ion uptake properties of low-cost inorganic sorption materials in the CaO-Al2O3-SiO2 system prepared from phosphogypsum and kaolin, J. Clean. Prod., 83, 483, 10.1016/j.jclepro.2014.06.084

Koopman, 2002, Ion exchange extraction during continuous recrystallization of CaSO4 in the phosphoric acid production process: lanthanide extraction efficiency and CaSO4 particle shape, Hydrometallurgy, 63, 137, 10.1016/S0304-386X(01)00219-5

Kumar, 2000, Fly ash – lime – phosphogypsum cementitious binder: a new trend in bricks, Mater. Struct., 33, 59, 10.1007/BF02481697

Kumar, 2002, A perspective study on fly ash-lime-gypsum bricks and hollow blocks for low cost housing development, Constr. Build. Mater., 16, 519, 10.1016/S0950-0618(02)00034-X

Leškevičiene, 2014, Influence of the setting activators on the physical mechanical properties of phosphoanhydeite, Chem. Ind. Chem. Eng. Q., 20, 233, 10.2298/CICEQ121127004L

Li, 2017, Immobilization of phosphogypsum for cemented paste backfill and its environmental effect, J. Clean. Prod., 156, 137, 10.1016/j.jclepro.2017.04.046

López, 2011, Microencapsulation of phosphgypsum into a sulfur polymer matrix: physico-chemical and radiological characterization, J. Hazard. Mater., 192, 234

Mineral Commodity Summaries, 2016, 1

Min, 2008, Activation of fly ash-lime system using calcined phosphogypsum, Constr. Build. Mater., 22, 1004, 10.1016/j.conbuildmat.2006.12.005

Mun, 2008, Properties of cement mortar with phosphogypsum under steam curing condition, Res. Lett. Mater. Sci., 1, 10.1155/2008/382490

Mun, 2007, Basic properties of non-sintering cement using phosphogypsum and waste lime as activator, Constr. Build. Mater., 21, 1342, 10.1016/j.conbuildmat.2005.12.022

Naik, 2014, Strength and durability of fly ash, cement and gypsum bricks, Int. J. Comput. Eng. Res. (IJCER), 4, 1

Nigade, 2015, An experimental investigation of partial replacement of cement by various percentage of phosphogypsum in cement concrete with different water cement ratio, Int. J. Innovative Sci. Eng. Technol., 2, 347

Potgieter, 2003, An investigation into the effect of various chemical and physical treatments of a South African phosphogypsum to render it suitable as a set retarder for cement, Cem. Concr. Res., 33, 1223, 10.1016/S0008-8846(03)00036-X

Rashad, 2015, Potential use of phosphogypsum in alkali-activated fly ash under the effects of elevated temperatures and thermal shock cycles, J. Clean. Prod., 87, 717, 10.1016/j.jclepro.2014.09.080

Reddy, 2010, A study on strength characteristics of phosphogypsum concrete, Asian J. Civ. Eng. Build. Hous., 11, 411

Reijnders, 2007, Cleaner phosphogypsum, coal combustion ashes and waste incineration ashes for application in building materials: a review, Build. Environ., 42, 1036, 10.1016/j.buildenv.2005.09.016

Rutherford, 1994, Environmental impacts of phosphogypsum, Sci. Total Environ., 149, 1, 10.1016/0048-9697(94)90002-7

Shen, 2012, Utilization of solidified phosphogypsum as Portland cement retarder, J. Mater Cycles Waste Manag., 14, 228, 10.1007/s10163-012-0065-x

Shen, 2014, Calcium sulphoaluminate cements mad with phosphogypsum: production issues and material properties, Cem. Concr. Compos., 48, 67, 10.1016/j.cemconcomp.2014.01.009

Sindhuja, 2016, Investigation of permeability characteristics of phosphogypsum based concrete, IOSR J. Mech. Civ. Eng. (JOSR-JMCE), 13, 191

Singh, 1982, Processing of phosphogypsum for the manufacture of plaster, Res. Ind., 27, 167

Singh, 2002, Treating waste phosphogypsum for cement and plaster manufacture, Cem. Concr. Res., 32, 1033, 10.1016/S0008-8846(02)00723-8

Singh, 1995, Activation of gypsum anhydrite – slag mixtures, Cem. Concr. Res., 25, 332, 10.1016/0008-8846(95)00018-6

Singh, 1995, Phosphogypsum – fly ash cementitious binder – its hydration and strength development, Cem. Concr. Res., 25, 752, 10.1016/0008-8846(95)00065-K

Singh, 1997, Durability of cementitious binder derived from industrial wastes, Mater. Struct., 30, 607, 10.1007/BF02486902

Singh, 2000, Making of anhydrite cement from waste gypsum, Cem. Concr. Res., 30, 571, 10.1016/S0008-8846(00)00209-X

Singh, 2002, Production of beneficiated phosphogypsum for cement manufacture, J. Sci. Ind. Res., 61, 533

Singh, 2005, Study on anhydrite plaster from waste phosphogypsum for use in polymerised flooring composition, Constr. Build. Mater., 19, 25, 10.1016/j.conbuildmat.2004.04.038

Singh, 1990, Durability of phosphogypsum based water-resistant anhydrite binder, Cem. Concr. Res., 20, 271, 10.1016/0008-8846(90)90080-H

Singh, 1993, Purifying phosphogypsum for cement manufacture, Constr. Build. Mater., 7, 3, 10.1016/0950-0618(93)90018-8

Singh, 1996, An improved process for the purification of phosphogypsum, Constr. Build. Mater., 10, 597, 10.1016/S0950-0618(96)00019-0

Smadi, 1999, Potential use of phosphogypsum in concrete, Cem. Concr. Res., 29, 1419, 10.1016/S0008-8846(99)00107-6

Srinivasulu, 2017, Effects of partial replacement of cement with phosphogypaum on strength characteristics of concrete, Int. J. Eng. Res. Online, 5, 43

Taher, 2007, Influence of thermally treated phosphogypsum on the properties of Portland slag cement, Resour. Conserv. Recycl., 52, 28, 10.1016/j.resconrec.2007.01.008

Tayibi, 2009, Environmental impact and management of phosphogypsum, J. Environ. Manag., 90, 2377

Türkel, 2012, A comparative study on the use of fly ash and phosphogypsum in the brick production, Indian Acad. Sci. Sādhanā, 37, 595

Umadevi, 2016, Studies on elevated temperature of fiber reinforced phosphogypsum concrete, Int. J. Civ. Eng. Technol. (IJCIET), 7, 234

van der Merwe, 2004, Purification of South African phosphogypsum for use as Portland cement retarder by a combined thermal and sulphuric acid treatment method, South Afr. J. Sci., 100, 411

Vebeek, 2005, Density and flexural strength of phosphogypsum-polymer composites, Constr. Build. Mater., 19, 265, 10.1016/j.conbuildmat.2004.07.011

Yang, 2011, Activation of anhydrate phosphogypsum by K2SO4 and hemihydrate gypsum, J. Wuhan Univ. Technol. Mater. Sci. Ed., 1103, 10.1007/s11595-011-0371-5

Yang, 2009, Preparation of load-bearing building materials from autoclaved phosphogypsum, Constr. Build. Mater., 23, 687, 10.1016/j.conbuildmat.2008.02.011

Yang, 2016, Utilization of original phosphogypsum as raw material for the preparation of self-leveling mortar, J. Clean. Prod., 127, 204, 10.1016/j.jclepro.2016.04.054

Zhao, 2015, Effects of kaolinite addition on the melting characteristics of the reaction between phosphogypsum and CaS, J. Therm. Anal Calorim, 119, 2119, 10.1007/s10973-015-4400-z

Zhou, 2014, A novel two-step hydration process of preparing cement-free non-fired bricks from waste phosphogypsum, Constr. Build. Mater., 73, 222, 10.1016/j.conbuildmat.2014.09.075

Ӧlmez, 1989, The effect of phosphogypsum on the setting and mechanical properties of Portland cement and trass cement, Cem. Concr. Res., 19, 377, 10.1016/0008-8846(89)90027-6