Phase composition, morphology and element contents of micro-arc oxidation ceramic coatings on Ti–6Al–4V alloy under different calcination conditions
Tóm tắt
Compound ceramic coatings with the main crystalline of Al2TiO5 (in the as-prepared coating without treatment) were prepared in situ on the surface Ti–6Al–4V alloy by means of pulsed bipolar micro-arc oxidation in NaAlO2 solution. For the purpose of studying the anti-oxidation properties of the samples, the coated samples treated in argon and the as-coated samples were calcined in air at 1000 °C. And the related characteristics were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray fluorescence (XRF) spectroscopy, respectively. The results show that, when it was calcined in air for 1 h, Al2TiO5 in the as-prepared coating decomposed and transformed into α-Al2O3 and rutile TiO2. However, after almost 4 h in argon, Al2TiO5 in the as-prepared coating decomposed and the final coating surface contents are completely α-Al2O3, and those of the middle interface are mainly Al2O3 and Ti2O3. The morphologies of the coatings after calcination in argon and air are different. High-temperature oxidation occurred violently in the alloy substrate without coatings. Furthermore, the weight gain curves of the as-prepared samples and the coated samples treated in argon both show a parabolic shape.
Tài liệu tham khảo
Krysmann W, Kurze P, Dittrich KH, Schneider HG. Process characteristics and parameters of anodic oxidation by spark discharge (ANOF). Crys Res Technol. 1984;19(7):973.
Byon E, Jeong Y, Takeuchi A, Kamitakahara M, Ohtsuki C. Apatite-forming ability of micro-arc plasma oxidized layer of titanium in simulated body fluids. Surf Coat Technol. 2007;201(9–11):5651.
Ruiz AM, Cornet A, Shimanoe K, Morante JR, Yamazoe N. Effects of various metal additives on the gas sensing performances of TiO2 nanocrystals obtained from hydrothermal treatments. Sens Actuator B Chem. 2005;108(1–2):34.
Ruiz AM, Cornet A, Shimanoe K, Morante JR, Yamazoe N. Transition metals (Co, Cu) as additives on hydrothermally treated TiO2 for gas sensing. Sens Actuators B Chem. 2005;109(1):7.
Nie X, Leyland A, Matthews A. Deposition of layered bioceramic hydroxyapatite/TiO2 coatings on titanium alloys using a hybrid technique of micro-arc oxidation and electrophoresis. Surf Coat Technol. 2000;125(1–3):407.
Han Y, Hong SH, Xu KW. Synthesis of nanocrystalline titania films by micro-arc oxidation. Mater Lett. 2002;56(5):744.
Li JF, Wan L, Feng JY. Micro arc oxidation of S-containing TiO2 films by sulfur bearing electrolytes. J Mater Process Technol. 2009;209(2):762.
Yang Y, Wu H. Effects of current density on microstructure of titania coatings by micro-arc oxidation. J Mater Sci Technol. 2012;28(4):321.
Yerokhin AL, Nie X, Leyland A, Matthews A, Dowey SJ. Plasma electrolysis for surface engineering. Surf Coat Technol. 1999;122(2–3):73.
Sundrarajan G, Rama Krishna L. Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology. Surf Coat Technol. 2003;167(2–3):269.
Jin FY, Chu PK, Wang K, Zhao J, Huang AP, Tong HH. Thermal stability of titania films prepared on titanium by micro-arc oxidation. Mat Sci Eng A. 2008;476(1–2):78.
Vojtěch D, Bártová B, Kubatík T. High temperature oxidation of titanium-silicon alloys. Mat Sci Eng A. 2003;361(1–2):50.
Rajendran A, Vinoth G, Shanthi V, Barik RC, Pattanayak DK. Silver nano particle incorporated Ti metal prepared by chemical treatment for antibacterial and corrosion resistance study. Mat Technol. 2014;29(S1):B26.
Zhao YG, Zhou W, Qin QD, Liang YH, Jiang QC. Effect of pre-oxidation on the properties of aluminide coating layers formed on Ti alloys. J Alloy Compd. 2005;391(1–2):136.
Zhong YS, Shi LP, Li MW, He F, He XD. Characterization and thermal shock behavior of composite ceramic coating doped with ZrO2 particles on TC4 by micro-arc oxidation. Appl Surf Sci. 2014;311:158.
Wang C, Hao JM, Xing YZ, Guo CF, Chen H. High temperature oxidation behavior of TiO2 + ZrO2 composite ceramic coatings prepared by microarc oxidation on Ti6Al4V alloy. Surf Coat Technol. 2015;261:201.
Wang SX, Zhao Q, Liu DX, Du N. Microstructure and elevated temperature tribological behavior of TiO2/Al2O3 composite ceramic coating formed by microarc oxidation of Ti6Al4V alloy. Surf Coat Technol. 2015;272:343.
Wang YH, Liu ZG, Ouyang JH, Wang YM, Zhou Y. Preparation and high temperature oxidation resistance of microarc oxidation ceramic coatings formed on Ti2AlNb alloy. Appl Surf Sci. 2012;258:8946.
Ouyang JH, Wang YH, Liu ZG, Wang YM, Wang YJ. Preparation and high temperature tribological properties of microarc oxidation ceramic coatings formed on Ti2AlNb alloy. Wear. 2015;330–331:239.
Barik RC, Wharton JA, Wood RJK, Stokes KR, Jones RL. Corrosion, erosion and erosion–corrosion performance of plasma electrolytic oxidation (PEO) deposited Al2O3 coatings. Surf Coat Technol. 2005;199(2–3):158.
Yerokhin AL, Nie X, Leyland A, Matthews A. Characterization of oxide films produced by plasma electrolytic oxidation of a Ti–6Al–4V alloy. Surf Coat Technol. 2000;130(2–3):195.
Li JF, Wan L, Feng JY. Study on the preparation of titania films for photocatalytic application by micro-arc oxidation. Sol Energy Mater Sol Cells. 2006;90(15):2449.
Xue WB, Wang C, Chen RY, Deng ZW. Structure and properties characterization of ceramic coatings produced on Ti–6Al–4V alloy by microarc oxidation in aluminate solution. Mater Lett. 2002;52(6):435.
Xue WB, Wang C, Li Y, Chen RY. Characterization of microarc oxidation coatings on pure titanium. Rare Met. 2003;22(1):42.
Liu F, Wang FP, Shimizu T, Igarashi K, Zhao LC. Structure and characteristics of oxide films containing Ca and P on Ti substrate. J Mater Sci Technol. 2005;21(2):285.
Terleeva OP, Belevantsev VI, Slonova AI, Boguta DL, Rudnev VS. Comparison analysis of formation and some characteristics of microplasma coatings on aluminum and titanium alloys. Prot Met. 2006;42(3):272.
Wang YM, Zhang PF, Guo LX, Jia DC. Effect of microarc oxidation coating on fatigue performance of Ti–Al–Zr alloy. Apl Surf Sci. 2009;255(20):8616.
Liu WH, Bao AL, Mao XY, Zheng GH. Microstructure and properties of microarc oxidation ceramic coatings on aluminum alloy. Key Eng Mater. 2007;353:1895.
Chen JZ, Shi YL, Wang L, Yan FY, Zhang FQ. Preparation and properties of hydroxyapatite-containing titania coating by micro-arc oxidation. Mater Lett. 2006;60(20):2538.
Ruiz AM, Sakai G, Cornet A, Shimanoe K, Morante JR, Yamazoe N. Cr-doped TiO2 gas sensor for exhaust NO2 monitoring. Sens Actuators B-Chem. 2003;93:509.
Chen Y, Zhang GD, Wu F, Zhu J. Study of the C/Mg interface in magnesium matrix composites reinforced by carbon (graphite) fiber. Rare Metal Mat Eng. 1997;26(3):20.
Yoshihara M, Miura K, Kim Y W. Oxidation behavior of structure-controlled TiAl. In: Proceedings of the TMS Symposium. Las Vegas; 1995. 93.