Pharmaceutical 3D printing: Design and qualification of a single step print and fill capsule

Christiyan, 2016, A study on the influence of process parameters on the Mechanical Properties of 3D printed ABS composite, IOP Conf. Ser. Mater. Sci. Eng., 114, 012109, 10.1088/1757-899X/114/1/012109 du Plessis, 2016, Quality Investigation of 3D Printer Filament Using Laboratory X-Ray Tomography., 3D Print. Additive Manuf., 3, 262, 10.1089/3dp.2016.0011 Futama, 1957, The Thermal Decomposition of Polyvinyl Alcohol Using Mass Spectrometer, J. Phys. Soc. Jpn., 12, 10.1143/JPSJ.12.433 Goyanes, 2014, Fused-filament 3D printing (3DP) for fabrication of tablets, Int. J. Pharm., 476, 88, 10.1016/j.ijpharm.2014.09.044 Goyanes, 2015, 3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets, Eur. J. Pharm. Biopharm., 89, 157, 10.1016/j.ejpb.2014.12.003 Goyanes, 2015, Effect of geometry on drug release from 3D printed tablets, Int. J. Pharm., 494, 657, 10.1016/j.ijpharm.2015.04.069 Goyanes, 2015, 3D printing of medicines: engineering novel oral devices with unique design and drug release characteristics, Mol. Pharm., 12, 4077, 10.1021/acs.molpharmaceut.5b00510 Kempin, 2017, Assessment of different polymers and drug loads for fused deposition modeling of drug loaded implants, Eur. J. Pharm. Biopharm., 115, 84, 10.1016/j.ejpb.2017.02.014 Khaled, 2014, Desktop 3D printing of controlled release pharmaceutical bilayer tablets, Int. J. Pharm., 461, 105, 10.1016/j.ijpharm.2013.11.021 Khaled, 2015, 3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles, J. Control. Release, 217, 308, 10.1016/j.jconrel.2015.09.028 Khaled, 2015, 3D printing of tablets containing multiple drugs with defined release profiles, Int. J. Pharm., 494, 643, 10.1016/j.ijpharm.2015.07.067 Markl, 2017, Analysis of 3D Prints by X-ray Computed Microtomography and Terahertz Pulsed Imaging, Pharm. Res., 34, 1037, 10.1007/s11095-016-2083-1 Melocchi, 2015, 3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs, J. Drug Delivery Sci. Technol., 30, 360, 10.1016/j.jddst.2015.07.016 Mohsin, 2011, Thermomechanical properties of poly (vinyl alcohol) plasticized with varying ratios of sorbitol, Mater. Sci. Eng., A, 528, 925, 10.1016/j.msea.2010.09.100 Morita, 2000, Development of oral controlled release preparations, a PVA swelling controlled release system (SCRS). II. In vitro and in vivo evaluation, J. Control. Release, 68, 115, 10.1016/S0168-3659(00)00244-3 Okwuosa, 2017, Fabricating a Shell-Core Delayed Release Tablet Using Dual FDM 3D Printing for Patient-Centred Therapy, Pharm. Res., 34, 427, 10.1007/s11095-016-2073-3 Okwuosa, 2016, A lower temperature FDM 3D printing for the manufacture of patient-specific immediate release tablets, Pharm. Res., 33, 2704, 10.1007/s11095-016-1995-0 Sadia, 2016, Adaptation of pharmaceutical excipients to FDM 3D printing for the fabrication of patient-tailored immediate release tablets, Int. J. Pharm., 513, 659, 10.1016/j.ijpharm.2016.09.050 Skowyra, 2015, Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing, Eur. J. Pharm. Sci., 68, 11, 10.1016/j.ejps.2014.11.009 Tagami, 2017, 3D Printing Factors Important for the Fabrication of Polyvinylalcohol Filament-Based Tablets, Biol. Pharm. Bull., 40, 357, 10.1248/bpb.b16-00878