Performances, challenges and opportunities in strengthening reinforced concrete structures by using FRPs – A state-of-the-art review

Bournas, 2015, Tensile capacity of FRP anchors in connecting FRP and TRM sheets to concrete, Eng. Struct., 82, 72, 10.1016/j.engstruct.2014.10.031

Al-Mahaidi, 2018, Methods of structural rehabilitation and strengthening, Rehabil. Concr. Struct. with Fiber-Reinforced Polym. Elsevier, 7, 10.1016/B978-0-12-811510-7.00002-1

Siddika, 2019, Flexural performance of wire mesh and geotextile-strengthened reinforced concrete beam, SN Appl. Sci, 1, 1324, 10.1007/s42452-019-1373-8

Fathelbab, 2014, Strengthening of RC bridge slabs using CFRP sheets, Alexandria Eng J, 53, 843, 10.1016/j.aej.2014.09.010

Teng, 2003, Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art review, Proc. Inst. Civ. Eng. Struct. Build., 156, 51, 10.1680/stbu.2003.156.1.51

Hollaway, 2011, Key issues in the use of fibre reinforced polymer (FRP) composites in the rehabilitation and retrofitting of concrete structures, Serv. Life Estim. Ext. Civ. Eng. Struct. Elsevier, 3

Derkowski, 2015, Opportunities and risks arising from the properties of FRP materials used for structural strengthening, Procedia Eng., 108, 371, 10.1016/j.proeng.2015.06.160

Mugahed Amran, 2018, Properties and applications of FRP in strengthening RC structures: a review, Structures, 16, 208, 10.1016/j.istruc.2018.09.008

Sonnenschein, 2016, FRP composites and their using in the construction of bridges, Procedia Eng., 161, 477, 10.1016/j.proeng.2016.08.665

Berardi, 2015, Thermal and fire characteristics of FRP composites for architectural applications, Polymers (Basel), 7, 2276, 10.3390/polym7111513

Remennikov, 2017, Impact performance of concrete beams externally bonded with carbon FRP sheets, 1695

Sorrentino, 2017, In process monitoring of cutting temperature during the drilling of FRP laminate, Compos. Struct., 168, 549, 10.1016/j.compstruct.2017.02.079

Huo, 2018, Dynamic behavior of CFRP-strengthened reinforced concrete beams without stirrups under impact loading, ACI Struct. J., 115, 775, 10.14359/51701283

Ou, 2015, Tensile behavior of glass fiber reinforced composite at different strain rates and temperatures, Constr. Build. Mater., 96, 648, 10.1016/j.conbuildmat.2015.08.044

Mottram, 2011, Does performance-based design with FRP components and structures provide any new benefits and challenges?, Struct. Eng., 89, 23

Belarbi, 2013, FRP systems in shear strengthening of reinforced concrete structures, Procedia Eng., 57, 2, 10.1016/j.proeng.2013.04.004

Osman, 2017, Repair of pre-cracked reinforced concrete (RC) Beams with openings strengthened using FRP sheets under sustained load, Int. J. Concr. Struct. Mater., 11, 171, 10.1007/s40069-016-0182-3

Ferdous, 2018, Short-term flexural behaviour of concrete filled pultruded GFRP cellular and tubular sections with pin-eye connections for modular retaining wall construction, Compos. Struct., 206, 1, 10.1016/j.compstruct.2018.08.025

Lee, 2009, The role of FRP composites in a sustainable world, Clean Technol. Environ. Policy, 11, 247, 10.1007/s10098-009-0253-0

Carloni, 2013, Investigation of sub-critical fatigue crack growth in FRP/concrete cohesive interface using digital image analysis, Compos. Part B Eng., 51, 35, 10.1016/j.compositesb.2013.02.015

Aslam, 2015, Strengthening of RC beams using prestressed fiber reinforced polymers – a review, Constr. Build. Mater., 82, 235, 10.1016/j.conbuildmat.2015.02.051

Recupero, 2014, Increasing the capacity of existing bridges by using unbonded prestressing technology: a case study, Adv Civ Eng, 2014, 1, 10.1155/2014/840902

Rousakis, 2010, Retrofitting and strengthening of contemporary structures: materials used, 1

Mostofinejad, 2013, Experimental study on effect of EBR and EBROG methods on debonding of FRP sheets used for shear strengthening of RC beams, Compos. Part B Eng., 45, 1704, 10.1016/j.compositesb.2012.09.081

Charalambidi, 2016, Fatigue behavior of large-scale reinforced concrete beams strengthened in flexure with fiber-reinforced polymer laminates, J. Compos. Constr., 20, 04016035, 10.1061/(ASCE)CC.1943-5614.0000689

Siddika, 2019, Strengthening of reinforced concrete beams by using fiber-reinforced polymer composites: A review, J. Build. Eng., 25, 100798, 10.1016/j.jobe.2019.100798

Koutas, 2013, Use of anchors in shear strengthening of reinforced concrete T-beams with FRP, J. Compos. Constr., 17, 101, 10.1061/(ASCE)CC.1943-5614.0000316

Lamanna, 2004, Flexural strengthening of reinforced concrete beams by mechanically attaching fiber-reinforced polymer strips, J. Compos. Constr., 8, 203, 10.1061/(ASCE)1090-0268(2004)8:3(203)

Ekenel, 2006, Flexural fatigue behavior of reinforced concrete beams strengthened with FRP fabric and precured laminate systems, J. Compos. Constr., 10, 433, 10.1061/(ASCE)1090-0268(2006)10:5(433)

Alhadid, 2014, Critical overview of blast resistance of different concrete types, Mag. Concr. Res., 66, 72, 10.1680/macr.13.00096

Haddad, 2017, Recovering flexural performance of thermally damaged concrete beams using NSM CFRP strips, Constr. Build. Mater., 154, 632, 10.1016/j.conbuildmat.2017.07.211

Bakis, 2002, Fiber-reinforced polymer composites for construction—state-of-the-art review, J. Compos. Constr., 6, 73, 10.1061/(ASCE)1090-0268(2002)6:2(73)

del Rey, 2018, Seismic behavior of RC columns flexurally strengthened with FRP sheets and FRP anchors, Compos. Struct., 203, 382, 10.1016/j.compstruct.2018.07.029

Ma, 2013, Experimental study of the seismic behavior of an earthquake-damaged reinforced concrete frame structure retrofitted with basalt fiber-reinforced polymer, J. Compos. Constr., 17, 04013002, 10.1061/(ASCE)CC.1943-5614.0000413

Del Vecchio, 2014, Experimental investigation of exterior RC beam-column joints retrofitted with FRP systems, J. Compos. Constr., 18, 04014002, 10.1061/(ASCE)CC.1943-5614.0000459

Seyhan, 2015, Seismic behavior of substandard RC columns retrofitted with embedded aramid fiber Reinforced polymer (AFRP) reinforcement, Polymers (Basel), 7, 2535, 10.3390/polym7121527

de Waal, 2017, FRP strengthening of 60 year old pre-stressed concrete bridge deck units, Eng. Struct., 143, 346, 10.1016/j.engstruct.2017.03.062

Chellapandian, 2019, Behavior of FRP-strengthened reinforced concrete columns under pure compression—experimental and numerical studies, Springer Singapore, 663

Al-Mahaidi, 2018, Axial strengthening of RC members using FRP, 187

ACI 440.2R-02. Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures. Am Concr Institute, Farmingt Hills, MI, USA 2002.

Pham, 2016, Review of concrete structures strengthened with FRP against impact loading, Structures, 7, 59, 10.1016/j.istruc.2016.05.003

Zarringol, 2016, A comparative study on the efficiency of CFRP and GFRP in the improvement of compressive strength, acoustic impedance and bracing of filled and hollow concrete columns in different layers and ages, J. Sustain. Dev., 9, 110, 10.5539/jsd.v9n5p110

Mahal, 2013, Examination at a material and structural level of the fatigue life of beams strengthened with mineral or epoxy bonded frps: the state of the art, Adv. Struct. Eng., 16, 1311, 10.1260/1369-4332.16.7.1311

Yao, 2016, Fiber-element modeling for seismic performance of square RC bridge columns retrofitted with nsm bfrp bars and/or bfrp sheet confinement, J. Compos. Constr., 20, 04016001, 10.1061/(ASCE)CC.1943-5614.0000652

ACI Committee 440., American Concrete Institute., ACI Committee 440. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. American Concrete Institute; 2017.

Zeng, 2018, Behavior of large-scale FRP-confined rectangular RC columns under axial compression, Eng. Struct., 174, 629, 10.1016/j.engstruct.2018.07.086

Tunaboyu, 2017, Seismic repair of captive-column damage with CFRPs in substandard RC frames, Struct Eng Mech, 61, 1, 10.12989/sem.2017.61.1.001

Ozbakkaloglu, 2014, Axial compressive behavior of FRP-concrete-steel double-skin tubular columns made of normal- and high-strength concrete, J. Compos. Constr., 18, 04013027, 10.1061/(ASCE)CC.1943-5614.0000401

Triantafillou, 2016, FRP confinement of wall-like reinforced concrete columns, Mater. Struct., 49, 651, 10.1617/s11527-015-0526-5

Chen, 2018, Experimental study of flexural behaviour of RC beams strengthened by longitudinal and U-shaped basalt FRP sheet, Compos. Part B Eng., 134, 114, 10.1016/j.compositesb.2017.09.053

Shannag, 2014, Flexure strengthening of lightweight reinforced concrete beams using carbon fibre-reinforced polymers, Struct. Infrastruct. Eng., 10, 604, 10.1080/15732479.2012.757790

Siddika, 2019, Performance and failure analysis of carbon fiber-reinforced polymer (CFRP) strengthened reinforced concrete (RC) beams, SN Appl. Sci., 1, 1617, 10.1007/s42452-019-1675-x

Zhang, 2017, Reinforced concrete beams strengthened in flexure with near-surface mounted (NSM) CFRP strips: current status and research needs, Compos. Part B Eng., 131, 30, 10.1016/j.compositesb.2017.07.072

Babaeidarabad, 2014, Flexural strengthening of RC beams with an externally bonded fabric-reinforced cementitious matrix, J. Compos. Constr., 18, 04014009, 10.1061/(ASCE)CC.1943-5614.0000473

El Maaddawy, 2005, Carbon-fiber-reinforced polymer repair to extend service life of corroded reinforced concrete beams, J. Compos. Constr., 9, 187, 10.1061/(ASCE)1090-0268(2005)9:2(187)

Attari, 2012, Flexural strengthening of concrete beams using CFRP, GFRP and hybrid FRP sheets, Constr. Build. Mater., 37, 746, 10.1016/j.conbuildmat.2012.07.052

Elsanadedy, 2015, Experimental and FE study on RC one-way slabs upgraded with FRP composites, KSCE J. Civ. Eng., 19, 1024, 10.1007/s12205-013-0689-y

Haddad, 2018, Flexural performance and failure modes of NSM CFRP-strengthened concrete beams: a parametric study, Int J Civ Eng, 1

Jakubovskis, 2014, Serviceability analysis of concrete beams with different arrangements of GFRP bars in the tensile zone, J. Compos. Constr., 18, 04014005, 10.1061/(ASCE)CC.1943-5614.0000465

Al-Saidy, 2010, Structural performance of corroded RC beams repaired with CFRP sheets, Compos. Struct., 92, 1931, 10.1016/j.compstruct.2010.01.001

Chen, 2012, Shear strength model for FRP-strengthened RC beams with adverse FRP-steel interaction, J. Compos. Constr., 17, 50, 10.1061/(ASCE)CC.1943-5614.0000313

Singh, 2013, Shear response and design of RC beams strengthened using CFRP laminates, Int. J. Adv. Struct. Eng., 5, 16, 10.1186/2008-6695-5-16

Ary, 2012, Shear-strengthening of reinforced & prestressed concrete beams using FRP: Part I — review of previous research, Int. J. Concr. Struct. Mater., 6, 41, 10.1007/s40069-012-0004-1

Hussein, 2013, Innovative repair technique for RC beams predamaged in shear, J. Compos. Constr., 17, 04013005, 10.1061/(ASCE)CC.1943-5614.0000404

Baggio, 2014, Strengthening of shear critical RC beams with various FRP systems, Constr. Build. Mater., 66, 634, 10.1016/j.conbuildmat.2014.05.097

Ebead, 2017, FRP/stirrups interaction of shear-strengthened beams, Mater. Struct., 50, 103, 10.1617/s11527-016-0973-7

Panda, 2011, Shear strengthening of RC T-beams with externally side bonded GFRP sheet, J. Reinf. Plast. Compos., 30, 1139, 10.1177/0731684411417202

Tang, 2003, Behavior of concrete beams strengthened with fiber-reinforced polymer laminates under impact loading, J. Compos. Constr., 7, 209, 10.1061/(ASCE)1090-0268(2003)7:3(209)

Pham, 2016, Impact behavior of FRP-strengthened RC beams without stirrups, J. Compos. Constr., 20, 04016011, 10.1061/(ASCE)CC.1943-5614.0000671

Bhatti, 2011, Impact resistant behaviour of RC slab strengthened with FRP sheet, Mater. Struct., 44, 1855, 10.1617/s11527-011-9742-9

Huo, 2016, Experimental Study on Dynamic Behavior of CFRP-to-Concrete Interface, J. Compos. Constr., 20, 04016026, 10.1061/(ASCE)CC.1943-5614.0000677

Buchan, 2007, Blast resistance of FRP composites and polymer strengthened concrete and masonry structures – a state-of-the-art review, Compos. Part B Eng., 38, 509, 10.1016/j.compositesb.2006.07.009

Pichandi, 2013, Fibrous and composite materials for blast protection of structural elements—a state-of-the-art review, J. Reinf. Plast. Compos., 32, 1477, 10.1177/0731684413498297

Kim, 2011, Debonding failure analysis of FRP-retrofitted concrete panel under blast loading, Struct. Eng. Mech., 38, 479, 10.12989/sem.2011.38.4.479

Ha, 2011, Experimental study on hybrid CFRP-PU strengthening effect on RC panels under blast loading, Compos. Struct., 93, 2070, 10.1016/j.compstruct.2011.02.014

Mutalib, 2019, Effect of CFRP strengthening properties with anchoring systems on P-I diagrams of RC panels under blast loads, Constr. Build. Mater., 200, 648, 10.1016/j.conbuildmat.2018.12.169

Meneghetti, 2011, Silva Filho LCP da, Gastal F de PSL. Fatigue life regression model of reinforced concrete beams strengthened with FRP, Mag. Concr. Res., 63, 539, 10.1680/macr.2011.63.7.539

Aidoo, 2004, Fatigue behavior of carbon fiber reinforced polymer-strengthened reinforced concrete bridge girders, J. Compos. Constr., 8, 501, 10.1061/(ASCE)1090-0268(2004)8:6(501)

Alyousef, 2016, Effect of FRP wrapping on fatigue bond behavior of spliced concrete beams, J. Compos. Constr., 20, 04015030, 10.1061/(ASCE)CC.1943-5614.0000588

Dong, 2012, Structural behaviour of RC beams externally strengthened with FRP sheets under fatigue and monotonic loading, Eng. Struct., 41, 24, 10.1016/j.engstruct.2012.03.024

Alyousef, 2016, Effect of the thickness of concrete cover on the fatigue bond strength of GFRP wrapped and non-wrapped reinforced concrete beams containing a lap splice, Structures, 6, 1, 10.1016/j.istruc.2016.01.001

Alyousef, 2018, Crack growth modeling of tension lap spliced reinforced concrete beams strengthened with fibre reinforced polymer wrapping under fatigue loading, Constr. Build. Mater., 166, 345, 10.1016/j.conbuildmat.2018.01.136

Alyousef, 2016, Fatigue bond stress-slip behavior of lap splices in the reinforcement of unwrapped and frp-wrapped concrete beams, J. Compos. Constr., 20, 04016039, 10.1061/(ASCE)CC.1943-5614.0000699

Charalambidi, 2016, Analysis of the fatigue behavior of reinforced concrete beams strengthened in flexure with fiber reinforced polymer laminates, Compos. Part B Eng., 96, 69, 10.1016/j.compositesb.2016.04.014

ACI 440.2R-08. Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-08). Reston, VA.

Pan, 2007, Experimental investigation of load carrying capacity of the slender reinforced concrete columns wrapped with FRP, Constr. Build. Mater., 21, 1991, 10.1016/j.conbuildmat.2006.05.050

Iacobucci, 2003, Retrofit of square concrete columns with carbon fiber-reinforced polymer for seismic resistance, ACI Struct. J., 100, 785

Ouyang, 2017, Seismic retrofit of square reinforced concrete columns using basalt and carbon fiber-reinforced polymer sheets: A comparative study, Compos. Struct., 162, 294, 10.1016/j.compstruct.2016.12.016

Gu, 2010, Confinement effectiveness of FRP in retrofitting circular concrete columns under simulated seismic load, J. Compos. Constr., 14, 531, 10.1061/(ASCE)CC.1943-5614.0000105

Shen, 2017, Experimental investigations on reinforced concrete shear walls strengthened with basalt fiber-reinforced polymers under cyclic load, Constr. Build. Mater., 136, 217, 10.1016/j.conbuildmat.2016.12.102

Mostofinejad, 2017, Experimental investigation of the efficacy of EBROG method in seismic rehabilitation of deficient reinforced concrete beam-column joints using CFRP sheets, J. Compos. Constr., 21, 04016116, 10.1061/(ASCE)CC.1943-5614.0000781

Del Vecchio, 2016, Modelling beam-column joints and FRP strengthening in the seismic performance assessment of RC existing frames, Compos. Struct., 142, 107, 10.1016/j.compstruct.2016.01.077

Micelli, 2015, Review study on the durability of FRP-confined concrete, J. Compos. Constr., 19, 04014056, 10.1061/(ASCE)CC.1943-5614.0000520

Shrestha, 2015, Durability of FRP concrete bonds and its constituent properties under the influence of moisture conditions, J. Mater. Civ. Eng., 27, A4014009, 10.1061/(ASCE)MT.1943-5533.0001093

Roy, 2001, Modeling of moisture diffusion in the presence of bi-axial damage in polymer matrix composite laminates, Int. J. Solids Struct., 38, 7627, 10.1016/S0020-7683(01)00021-X

Humeau, 2018, An experimental study of water diffusion in carbon/epoxy composites under static tensile stress, Compos. Part A Appl. Sci. Manuf., 107, 94, 10.1016/j.compositesa.2017.12.016

Amidi, 2016, Deterioration of the FRP-to-concrete interface subject to moisture ingress: Effects of conditioning methods and silane treatment, Compos. Struct., 153, 380, 10.1016/j.compstruct.2016.06.035

Cromwell, 2011, Environmental durability of externally bonded FRP materials intended for repair of concrete structures, Constr. Build. Mater., 25, 2528, 10.1016/j.conbuildmat.2010.11.096

Karbhari, 2003, Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure, J. Compos. Constr., 7, 238, 10.1061/(ASCE)1090-0268(2003)7:3(238)

Ray, 2006, Effects of changing environment and loading speed on mechanical behavior of FRP composites, J. Reinf. Plast. Compos., 25, 1227, 10.1177/0731684406059783

Xie, 2017, Durability of CFRP sheets and epoxy resin exposed to natural hygrothermal or cyclic wet-dry environment, Polym. Compos.

Ferdous, 2018, Modular assembly of water-retaining walls using GFRP hollow profiles: Components and connection performance, Compos. Struct., 194, 1, 10.1016/j.compstruct.2018.03.074

Nardone, 2012, Tensile behavior of epoxy based FRP composites under extreme service conditions, Compos. Part B Eng., 43, 1468, 10.1016/j.compositesb.2011.08.042

McIsaac, 2018, Durability under freeze–thaw cycles of concrete beams retrofitted with externally bonded FRPs using bio-based resins, Constr. Build. Mater., 168, 244, 10.1016/j.conbuildmat.2018.02.062

Shi, 2013, Bond behavior between basalt fiber-reinforced polymer sheet and concrete substrate under the coupled effects of freeze-thaw cycling and sustained load, J. Compos. Constr., 17, 530, 10.1061/(ASCE)CC.1943-5614.0000349

Yun, 2011, Durability of CFRP–concrete joints under freeze–thaw cycling, Cold Reg. Sci. Technol., 65, 401, 10.1016/j.coldregions.2010.11.008

Subramaniam, 2008, Freeze–thaw degradation of FRP–concrete interface: impact on cohesive fracture response, Eng. Fract. Mech., 75, 3924, 10.1016/j.engfracmech.2007.12.016

Green, 2006, FRP confined concrete columns: behaviour under extreme conditions, Cem. Concr. Compos., 28, 928, 10.1016/j.cemconcomp.2006.07.008

Mabry, 2018, The effects of accelerated Freeze-Thaw conditioning on CFRP strengthened concrete with pre-existing bond defects, Constr. Build. Mater., 163, 286, 10.1016/j.conbuildmat.2017.12.017

Hadigheh, 2017, Effect of acid attack on FRP-to-concrete bonded interfaces, Constr. Build. Mater., 152, 285, 10.1016/j.conbuildmat.2017.06.140

Ji, 2017, Effects of sulfuric acid on durability characteristics of CFRP composite sheets, J. Mater. Civ. Eng., 29, 04017159, 10.1061/(ASCE)MT.1943-5533.0002008

Hajiloo, 2018, Bond strength of GFRP reinforcing bars at high temperatures with implications for performance in fire, J. Compos. Constr., 22, 04018055, 10.1061/(ASCE)CC.1943-5614.0000897

Jiangtao, 2017, The performance of near-surface mounted CFRP strengthened RC beam in fire, Fire Saf. J., 90, 86, 10.1016/j.firesaf.2017.04.031

Hajiloo, 2018, Mechanical properties of GFRP reinforcing bars at high temperatures, Constr. Build. Mater., 162, 142, 10.1016/j.conbuildmat.2017.12.025

Cabral-Fonseca, 2018, Durability of FRP - concrete bonded joints in structural rehabilitation: a review, Int. J. Adhes. Adhes., 83, 153, 10.1016/j.ijadhadh.2018.02.014

Chandrathilaka, 2019, Mechanical characterization of CFRP/steel bond cured and tested at elevated temperature, Compos. Struct., 207, 471, 10.1016/j.compstruct.2018.09.048

Wu, 2015, Prediction of long-term performance and durability of BFRP bars under the combined effect of sustained load and corrosive solutions, J. Compos. Constr., 19, 04014058, 10.1061/(ASCE)CC.1943-5614.0000517

El-Hassan, 2018, Durability of glass fiber-reinforced polymer bars conditioned in moist seawater-contaminated concrete under sustained load, Constr Build Mater, 175, 1, 10.1016/j.conbuildmat.2018.04.107

Yu, 2014, Effect of high temperature on bond strength of near-surface mounted FRP reinforcement, Compos Struct, 110, 88, 10.1016/j.compstruct.2013.11.021

Ferdous, 2016, Properties of epoxy polymer concrete matrix: effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers, Constr Build Mater, 124, 287, 10.1016/j.conbuildmat.2016.07.111

Bagherpour, 2012, Fibre reinforced polyester composites, Polyester, 10.5772/48697

Pham, 2017, Behavior of fiber-reinforced polymer-strengthened reinforced concrete beams under static and impact loads, Int. J. Prot. Struct., 8, 3, 10.1177/2041419616658730

Karayannis, 2008, Strengthening and rehabilitation of RC beam–column joints using carbon-FRP jacketing and epoxy resin injection, Earthq Eng. Struct. Dyn., 37, 769, 10.1002/eqe.785

Smith, 2002, FRP-strengthened RC beams. I: review of debonding strength models, Eng. Struct., 24, 385, 10.1016/S0141-0296(01)00105-5

Camata, 2004, Analysis of test specimens for cohesive near-bond failure of fiber-reinforced polymer-plated concrete, J. Compos. Constr., 8, 528, 10.1061/(ASCE)1090-0268(2004)8:6(528)

Kalfat, 2013, Anchorage devices used to improve the performance of reinforced concrete beams retrofitted with FRP composites: state-of-the-art review, J. Compos. Constr., 17, 14, 10.1061/(ASCE)CC.1943-5614.0000276

Mutalib, 2011, Numerical analysis of FRP-composite-strengthened RC panels with anchorages against blast loads, J. Perform. Constr. Facil., 25, 360, 10.1061/(ASCE)CF.1943-5509.0000199

Huang, 2019, Reliability assessment for flexural FRP-Strengthened reinforced concrete beams based on Importance Sampling, Compos. Part B Eng., 156, 378, 10.1016/j.compositesb.2018.09.002

Baky, 2007, Flexural and interfacial behavior of FRP-strengthened reinforced concrete beams, J. Compos. Constr., 11, 629, 10.1061/(ASCE)1090-0268(2007)11:6(629)

Pham, 2004, Experimental investigation into flexural retrofitting of reinforced concrete bridge beams using FRP composites, Compos. Struct., 66, 617, 10.1016/j.compstruct.2004.05.010

Moein, 2016, An analytical model for FRP debonding in strengthened RC beams under monotonic and cyclic loads, Int. J. Concr. Struct. Mater., 10, 499, 10.1007/s40069-016-0172-5

del Rey, 2019, Straight FRP anchors exhibiting fiber rupture failure mode, Compos. Struct., 207, 612, 10.1016/j.compstruct.2018.09.073

Adhikary, 2004, Behavior of Concrete Beams Strengthened in Shear with Carbon-Fiber Sheets, J Compos. Constr., 8, 258, 10.1061/(ASCE)1090-0268(2004)8:3(258)

Sabau, 2018, Strengthening of RC beams using bottom and side NSM reinforcement, Compos. Part B Eng., 149, 82, 10.1016/j.compositesb.2018.05.011

J. Sena-Cruz, J. Barros, V. Bianco, A. Bilotta, D. Bournas, F. Ceroni, et al. NSM Systems, 2016, pp. 303–48. doi:10.1007/978-94-017-7336-2_8.

Teng, 2006, Debonding Failures of RC Beams Strengthened with Near Surface Mounted CFRP Strips, J. Compos. Constr., 10, 92, 10.1061/(ASCE)1090-0268(2006)10:2(92)

Pham, 2004, Assessment of available prediction models for the strength of FRP retrofitted RC beams, Compos. Struct., 66, 601, 10.1016/j.compstruct.2004.05.008

Krzywoń, 2017, Behavior of EBR FRP strengthened beams exposed to elevated temperature, Proc. Eng, 193, 297, 10.1016/j.proeng.2017.06.217

Dias, 2018, Behavior of RC beams flexurally strengthened with NSM CFRP laminates, Compos. Struct., 201, 363, 10.1016/j.compstruct.2018.05.126

Toutanji, 2006, Cyclic behavior of RC beams strengthened with carbon fiber sheets bonded by inorganic matrix, J. Mater. Civ. Eng., 18, 28, 10.1061/(ASCE)0899-1561(2006)18:1(28)

Chaallal, 2010, Fatigue performance of RC beams strengthened in shear with CFRP fabrics, J. Compos. Constr., 14, 415, 10.1061/(ASCE)CC.1943-5614.0000095

Gribniak, 2017, Mechanical behavior of steel fiber-reinforced concrete beams bonded with external carbon fiber sheets, Materials (Basel), 10, 666, 10.3390/ma10060666

Ouyang, 2008, Modeling of moisture diffusion in FRP strengthened concrete specimens, J. Compos. Constr., 12, 425, 10.1061/(ASCE)1090-0268(2008)12:4(425)

Tuakta, 2011, Conceptual model for prediction of FRP-concrete bond strength under moisture cycles, J. Compos. Constr., 15, 743, 10.1061/(ASCE)CC.1943-5614.0000210

Katz, 2000, Modeling the effect of high temperature on the bond of FRP reinforcing bars to concrete, Cem. Concr. Compos., 22, 433, 10.1016/S0958-9465(00)00043-3

Ali, 2012, Comparative durability analysis of CFRP-strengthened RC highway bridges, Constr. Build. Mater., 30, 629, 10.1016/j.conbuildmat.2011.12.014

Chen, 2001, Anchorage strength models for FRP and steel plates bonded to concrete, J. Struct. Eng., 127, 784, 10.1061/(ASCE)0733-9445(2001)127:7(784)

Zhang, 2013, Bond–slip model for CFRP strips near-surface mounted to concrete, Eng. Struct., 56, 945, 10.1016/j.engstruct.2013.05.032

Ko, 2014, Development of a simplified bond stress–slip model for bonded FRP–concrete interfaces, Constr. Build. Mater., 68, 142, 10.1016/j.conbuildmat.2014.06.037

Mukhtar, 2019, Customized shear test for bond-slip characterization of EBR FRP-concrete system: Influence of substrate aggregate type, Compos. Part B Eng., 163, 606, 10.1016/j.compositesb.2018.12.150

Chen, 2016, Theoretical solution to fatigue bond stress distribution of NSM FRP reinforcement in concrete, Compos. Part B Eng., 99, 453, 10.1016/j.compositesb.2016.06.025

Mahal, 2016, A two-scale damage model for high-cycle fatigue at the fiber-reinforced polymer–concrete interface, Finite Elem Anal Des, 116, 12, 10.1016/j.finel.2016.03.003

El-Zeadani, 2019, Mechanics-based approach for predicting the short-term deflection of CFRP plated RC beams, Compos Struct, 225, 10.1016/j.compstruct.2019.111169

L. Taerwe, Use of Fibre Reinforced Polymers (FRP) in Concrete Structures: A Critical Appraisal. Massivbau in ganzer Breite, Springer-Verlag, Berlin/Heidelberg, 2005, pp. 161–174. doi:10.1007/3-540-26827-8_21.

National Research Council (NRC), Guide for design and construction of externally bonded FRP systems for strengthening existing structures.”CNR-DT 200, Rome, 2004.

Kotynia, 2011, RC slabs strengthened with prestressed and gradually anchored CFRP strips under monotonic and cyclic loading, J. Compos. Constr., 15, 168, 10.1061/(ASCE)CC.1943-5614.0000081

Haskett, 2009, Influence of Bond on the Hinge Rotation of FRP Plated Beams, Adv Struct Eng, 12, 833, 10.1260/136943309790327725

Haeger, 2016, Non-destructive detection of drilling-induced delamination in CFRP and its effect on mechanical properties, Proc. Eng., 149, 130, 10.1016/j.proeng.2016.06.647

Nezamian, 2007, Case study of application of FRP composites in strengthening the reinforced concrete headstock of a bridge structure, J. Compos. Constr., 11, 531, 10.1061/(ASCE)1090-0268(2007)11:5(531)

Berardi, 2014, Fire performance assessment of a fiber reinforced polymer wall panel used in a single family dwelling, Fire Technol., 50, 1607, 10.1007/s10694-014-0403-8

Ferdous, 2018, Effect of fire-retardant ceram powder on the properties of phenolic-based GFRP composites, Compos. Part B Eng., 155, 414, 10.1016/j.compositesb.2018.09.032

Lissek, 2016, Damage quantification for the machining of CFRP: an introduction about characteristic values considering shape and orientation of drilling-induced delamination, Proc. Eng., 149, 2, 10.1016/j.proeng.2016.06.632

Bilotta, 2011, Bond Efficiency of EBR and NSM FRP systems for strengthening concrete members, J. Compos. Const.r, 15, 757, 10.1061/(ASCE)CC.1943-5614.0000204

Clarke, 2002, 2.3 Guidance on installing, inspecting and monitoring FRP strengthened concrete structures, Adv. Polym. Compos. Struct. Appl. Constr., 85

Mara, 2014, Bridge decks of fibre reinforced polymer (FRP): a sustainable solution, Constr. Build. Mater., 50, 190, 10.1016/j.conbuildmat.2013.09.036

Price of Materials n.d. www.alibaba.com.

Ou, 2016, Mechanical properties and failure characteristics of CFRP under intermediate strain rates and varying temperatures, Compos. Part B Eng., 95, 123, 10.1016/j.compositesb.2016.03.085

Kang, 2012, A state-of-the-art review on debonding failures of FRP laminates externally adhered to concrete, Int. J. Concr. Struct. Mater., 6, 123, 10.1007/s40069-012-0012-1

Liang, 2013, Fiber-reinforced polymer (FRP) composites in environmental engineering applications, Dev. Fiber-Reinforced Polym. Compos. Civ. Eng., 410

Tyfo® FRP Strengthening n.d. http://concretesolutions.co.nz/tyfo-frp-seismic-strengthening-floor-diaphragm-beam-connection/.

FRP Sheets Market n.d. https://www.marketsandmarkets.com/Market-Reports/frp-panels-and-sheets-market-201108918.html.

FRP Composites Market Report, 2014-2025 n.d. https://www.grandviewresearch.com/industry-analysis/fiber-reinforced-polymer-frp-composites-market.

Yang, 2016, Uniaxial Tensile Stress-Strain Relationships of RC Elements Strengthened with FRP Sheets, J Compos Constr, 20, 04015075, 10.1061/(ASCE)CC.1943-5614.0000639

El-Hacha, 2013, Prestressed near-surface mounted fibre reinforced polymer reinforcement for concrete structures — a review, Can J Civ Eng, 40, 1127, 10.1139/cjce-2013-0063

Ferdous, 2017, Effect of beam orientation on the static behaviour of phenolic core sandwich composites with different shear span-to-depth ratios, Compos Struct, 168, 292, 10.1016/j.compstruct.2017.02.061