Performance of the micro-texture self-lubricating and pulsating heat pipe self-cooling tools in dry cutting process

Weinert, 2004, Dry machining and minimum quantity lubrication, CIRP Ann Manuf Technol, 53, 511, 10.1016/S0007-8506(07)60027-4 Sreejith, 2000, Dry machining: machining of the future, J Mater Process Technol, 101, 287, 10.1016/S0924-0136(00)00445-3 Sharma, 2009, Cooling techniques for improved productivity in turning, Int J Mach Tools Manuf, 49, 435, 10.1016/j.ijmachtools.2008.12.010 Etsion, 2005, State of the art in laser surface texturing, J Tribol, 127, 248, 10.1115/1.1828070 Pettersson, 2003, Influence of surface texture on boundary lubricated sliding contacts, Tribol Int, 36, 857, 10.1016/S0301-679X(03)00104-X Wu, 2012, Tribological behaviour of textured cemented carbide filled with solid lubricants in dry sliding with titanium alloys, Wear, 292–293, 135, 10.1016/j.wear.2012.05.021 Wu, 2012, Effect of surface texturing on friction properties of WC/Co cemented carbide, Mater Des, 41, 142, 10.1016/j.matdes.2012.05.012 Xing, 2013, Effect of laser surface texturing on Si3N4/TiC ceramic sliding against steel under dry friction, Mater Des, 52, 234, 10.1016/j.matdes.2013.05.077 Sugihara, 2009, Development of a cutting tool with a nano/micro-textured surface-improvement of anti-adhesive effect by considering the texture patterns, Precis Eng, 33, 425, 10.1016/j.precisioneng.2008.11.004 Lei, 2009, A study of micropool lubricated cutting tool in machining of mild steel, J Mater Process Technol, 209, 1612, 10.1016/j.jmatprotec.2008.04.024 Deng, 2012, Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes, Int J Refract Met Hard Mater, 30, 164, 10.1016/j.ijrmhm.2011.08.002 Wu, 2012, Performance of the self-lubricating textured tools in dry cutting of Ti-6Al-4V, Int J Adv Manuf Technol, 62, 943 Wu, 2011, Experimental study on the cutting temperature with micro-texturing self-lubricated tools, Adv Mater Res, 291–294, 715 Faghri, 1995 Jen, 2002, Investigation of heat pipe cooling in drilling applications, part I: preliminary numerical analysis and verification, Int J Mach Tools Manuf, 42, 643, 10.1016/S0890-6955(01)00155-9 Zhu, 2013, Investigation of the feasibility and effectiveness in using heat pipe-embedded drills by finite element analysis, Int J Adv Manuf Technol, 64, 659, 10.1007/s00170-012-4077-4 Haq, 2006, Investigation of the effects of cooling in hard turning operations, Int J Adv Manuf Technol, 30, 808 Chiou, 2007, Investigation of dry machining with embedded heat pipe cooling by finite element analysis and experiments, Int J Adv Manuf Technol, 31, 905, 10.1007/s00170-005-0266-8 Liang, 2011, Investigation of tool–chip interface temperature in dry turning assisted by heat pipe cooling, Int J Adv Manuf Technol, 54, 35, 10.1007/s00170-010-2926-6 Akachi H. Structure of micro-heat pipe. US Patent 5219020, 1993-06-15. Tong, 2001, Closed-loop pulsating heat pipe, Appl Therm Eng, 21, 1845, 10.1016/S1359-4311(01)00063-1 Zhang, 2002, Heat transfer in a pulsating heat pipe with open end, Int J Heat Mass Transf, 45, 755, 10.1016/S0017-9310(01)00203-4 Yang, 2008, Operational limit of closed loop pulsating heat pipes, Appl Therm Eng, 28, 49, 10.1016/j.applthermaleng.2007.01.033 Shaw, 1984 Chen, 1992 Li, 2012, Progressive tool failure in high-speed dry milling of Ti-6Al-4V alloy with coated carbide tools, Int J Adv Manuf Technol, 58, 465, 10.1007/s00170-011-3408-1 Bhaumik, 1995, Machining Ti-6Al-4V alloy with a wBN-cBN composite tool, Mater Des, 16, 221, 10.1016/0261-3069(95)00044-5 Davim, 2007, New machinability study of glass fibre reinforced plastics using polycrystalline diamond and cemented carbide (K15) tools, Mater Des, 28, 1050, 10.1016/j.matdes.2005.09.019 ISO 3685, 1993 Zhou, 1992 Liu, 1991