Performance of reinforced concrete beam with cushion subjected to impact loading

H. Masuya, Impact problem concerning rock falls and research activities of related field in Japan, in: Proceedings of the 6th Asia-Pacific Conference on Shock & Impact Loads on Structures, CI-Premier Pte Ltd, 2005. J. Jacquemoud, Swiss guideline for the design of protection alleries: background, safety concept and case histories, in: Proceedings of the Joint Japan-Swiss Scientific Seminar on Impact Load by Rock Falls and Design of Protection Structures, 1999, pp. 95–102. Volkwein, 2011, Rockfall characterisation and structural protection – a review, Nat. Hazards Earth Syst. Sci. Eur. Geosci. Union, 11, 2617, 10.5194/nhess-11-2617-2011 G. Nivalp SA. 〈www.geobrugg.com〉, Geobrugg, 2018. [Online]. Available: 〈https://www.geobrugg.com/en/Route-Chalais-Vercorin-Valais-103610.html〉. (Accessed 21 May 2021). Kurihashi, 2020, Simplified estimation method for maximum deflection in bending-failure-type reinforced concrete beams subjected to collion action and its application range, Appl. Sci., 10, 6941, 10.3390/app10196941 Japan Road Association, Handbook of Preventatives Against Rockfalls, Japan Road Association, 2000 (in Japanese). Japan Railway Civil Engineering Association, Manual for Preventive Structures Against Rock Falls, Japan Railway Civil Engineering Association, 1978 (in Japanese). Mougin, 2005, Rock fall impact on reinforced concrete slab: an experimental approach, Int. J. Impact Eng., 31, 169, 10.1016/j.ijimpeng.2003.11.005 Tachibana, 2010, Performance based design of reinforced concrete beams under impact, Nat. Hazards Earth Syst. Sci., 10, 1069, 10.5194/nhess-10-1069-2010 Kishi, 2012, Empirical formulas for designing reinforced concrete beams under impact loading, Acids Struct. J., 109, 509 Krauthammer, 1987, Analysis of reinforced concrete beams subjected to severe concentrated loads, ACI Struct. J., 84, 473 Fujikake, 2006, Nonlinear analysis for reactive powder concrete beams under rapid flexural loadings, J. Adv. Concr. Technol., 4, 85, 10.3151/jact.4.85 Fujikake, 2006, Study on impact response of reactive powder concrete beams and its analytical model, J. Adv. Concr. Technol. JCE, 4, 99, 10.3151/jact.4.99 Fujikake, 2009, Analytical evaluation on maximum deflection responses of RC beams subjected to impact loadings, J. Struct. Eng. A, 55A, 1204 Fujikake, 2009, Impact response of reinforced concrete beam and its analytical evaluation, J. Struct. Eng. (ASCE), 135, 938, 10.1061/(ASCE)ST.1943-541X.0000039 Hwang, 2019, Numerical model for flexural behavior of reinforced concrete members subjected to low-velocity impact loads, ACI Struct. J., 116, 65, 10.14359/51711136 H. Yoshida, T. Nomura, D.C. Wyllie, A.J. Morris, Rock fall sheds – application of Japanese designs in North America, in: A.K. Turner, R.L. Schuster, C.O. Vail (Eds.), Proceedings of the first North American Landslide Conference, AEG Special Publication No. 22, 2007, pp. 179–96. Yoshida, 1988, Exprimental study of impulsive desing load for rock sheds, IABSE Period., 12, 61 Ishikawa, 1993, Design method of rock sheds – impact behavior and design of structures, Jap. Soc. Civ. Eng., 153 Kishi, 2002, Prototype impact tests on ultimate impact resistance of PC rock-sheds, Int. J. Impact Eng., 27, 969, 10.1016/S0734-743X(02)00019-2 Pham, 2019, Axial impact behavior and energy absorption of rubberized concrete with/without fiber-reinforced polymer confinement, Int. J. Prot. Struct., 10, 154, 10.1177/2041419618800771 Sukontasukku, 2013, Use of rubberized concrete as a cushion layer in bulletproof fiber reinforced concrete panels, Constr. Build. Mater., 41, 801, 10.1016/j.conbuildmat.2012.12.068 Sun, 2016, Performance of used tire cushion layer under rockfall impact, Shock and Vibration, 2016, 10.1155/2016/8760592 Simon, 2006, Compressive response of polymeric foams under quasi-static, medium and high strain rate conditions, Polym. Test., 25, 731, 10.1016/j.polymertesting.2006.05.005 Umud, 2011, Hydrostatic compression of anisotropic low density polymeric foams under multiple loadings and unloadings, Polym. Test., 30, 737, 10.1016/j.polymertesting.2011.06.002 Kurihashi, 2020, Experimental study on impact absorption capacity of various expanded materials for rock shed, Shock and Vibration, 2020, 10.1155/2020/7412456 High Impact Polystyrene Properties, Curbell Plastics, Inc., [Online]. Available: 〈https://www.curbellplastics.com/Research-Solutions/Plastic-Material-Properties/High-Impact-Polystyrene-Properties〉. (Accessed 22 May 2021). 〈www.curbellplastics.com〉, August 2019. [Online]. Available: 〈https://www.curbellplastics.com/Research-Solutions/Technical-Resources/Technical-Resources/TUFFAK-Polycarbonate-Sheet-Fabrication-Guide〉. (Accessed 22 May 2021). Japanese Industrial Standard (JIS) and Japanese Standards Association (JSA), JIS G 3112: Steel Bars for Concrete Reinforcement, JSA, 2020. Japanese Industrial Standard (JIS) and Japanese Standards Association (JSA), JIS K 7220:2006: Rigid Cellular Plastics – Determination of Compression Properties, JSA, 2006. Hong, 2021, On the accuracy, reliability and controllability of impact tests of RC beams, Int. J. Impact Eng., 157, 1 Malvar, 1998, Review of static and dynamic properties of steel reinforcing bars, ACI Mater. J., 5, 609 Malvar, 1998, Review of strain rate effects for concrete in tension, ACI Mater. J., 95, 735 Hao, 2014, Influence of the concrete DIF model on the numerical predictions of RC wall responses to blast loadings, Eng. Struct., 73, 24, 10.1016/j.engstruct.2014.04.042 Tran, 2021, Impact response of fibre reinforced goepolymer concrete beams with BFRP bars and stirrups, Eng. Struct., 231, 1, 10.1016/j.engstruct.2020.111785 Japanese Society of Civil_Engineers (JSCE), Standard Specifications for Concrete Structure 2007-Design, JSCE 2010 Concrete Committee, 2010. [Online]. Available: 〈https://www.jsce-int.org/about/guideline〉. (Accessed April 2021).