Performance of composite materials under high-speed impact in extreme environments

V. Sánchez‐Gálvez1, David A. Cendón1, Rafael Sancho1, Francisco Gálvez1
1Department of Materials Science Universidad Politécnica de Madrid Madrid Spain

Tóm tắt

Từ khóa


Tài liệu tham khảo

Abrate S (1998) Impact on composite structures. Cambridge University Press, Cambridge

Cormier L (2017) Temperature effects on the static, dynamic and fatigue behaviour of composite materials used in wind turbine blades (Doctoral dissertation, École de de technologie supérieure)

Cormier, L., & Joncas, S. (2010) Effects of cold temperature, moisture and freeze-thaw cycles on the mechanical properties of unidirectional glass fiber-epoxy composites. In: 51st AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference 18th AIAA/ASME/AHS adaptive structures conference 12th, 2010, p 2823

Cunniff PM (1992) An analysis of the system effects in woven fabrics under ballistic impact. Textile Res J 62(9):495–509

Cunniff PM (1996) A semiempirical model for the ballistic impact performance of textile-based personnel armor. Textile Res J 66(1):45–59

Department of Defense USA (2000) Composite materials handbook, vol 3. SAE International, United States

Fitzer E (1988) Composites for high temperatures. Pure Appl Chem 60(3):287–302

Gómez del Río T et al (2005) Damage in CFRPs due to low velocity impact at low temperature”. Compos B Eng 31(1):41–50

Grabovac I (2005) Composite reinforcement for Naval Ships. Concept design, analysis and demonstration. School of Applied Sciences, RMIT University, Melbourne

Lopresto V, Langella A, Abrate S (eds) (2017) Dynamic response and failure of composite materials and structures. Woodhead Publishing, Duxford

Paradela LS, Sánchez-Gálvez V (2013) Analytical simulation of high-speed impact onto composite materials targets. J Strain Anal Eng Des 48(5):282–290

Rupert NL, Blethen WC (2010) Dyneema fabric data set for the calibration of fabric penetration models. In: 25th Int Symposium on Ballistics, Beijing, China, May 2010, pp. 1429–1436

Sánchez-Gálvez V, Sánchez-Paradela L, Gálvez F (2014) Analytical simulation of high-speed impact onto hybrid glass/carbon epoxy composites targets. Proc Eng 88:101–108

Sánchez-Gálvez V, Gálvez F, Sancho R, Cendón D (2017) A new analytical model to simulate high-speed impact onto composite materials targets. Int J Impact Engng 108:322–333

Schutz JB (1998) Properties of composite materials for cryogenic applications. Cryogenics 38(1):3–12

Shenoi RA, Dulleu-Barton JM, Quinn S, Blake JIR, Boyd SW (2011) Composite materials for Marine applications. Key challenges for the future. School of Engineering Sciences, University of Southampton, Southampton

Stone MA, Fink BK, Bogetti TA, Gillespie JW Jr (2000) Thermo-chemical response of vinyl-ester resin. Polym Eng Sci 40(12):2489–2497

Syngellakis S (2014) Projectile Impact. Modelling Techniques and Target Performance Assessment. WIT Press, Ashurst