Performance evaluation of self lubricating CuO added ZTA ceramic inserts in dry turning application

Wang, 1989, Zirconia-toughened alumina (ZTA) ceramics, J. Mater. Sci., 24, 3421, 10.1007/BF02385721 Mazumder, 2019, Tribological investigation of MgO/Al2O3 ceramic composite with the inclusion of nano CuO in dry abrasive wear test, Mater. Res. Express., 6, 10.1088/2053-1591/ab2283 Ghosh, 2021, Enhancement of dry sliding tribological characteristics of perforated zirconia toughened alumina ceramic composite filled with nano MoS2 in high vacuum, J. Tribol., 143, 10.1115/1.4048497 Mazumder, 2021, An effective approach of nanoscale CaF2 addition into ZTA composite to enhance tribological characteristics in dry sliding, Trans. Indian Ceram. Soc., 80, 1, 10.1080/0371750X.2020.1863863 Bolton, 1993, Phase reactions and chemical stability of ceramic carbide and solid lubricant particulate additions within sintered high speed steel matrix, Powder Metall., 36, 267, 10.1179/pom.1993.36.4.267 Cura, 2013, Microstructure and tribological properties of pulsed electric current sintered alumina–zirconia nanocomposites with different solid lubricants, Ceram. Int., 39, 2093, 10.1016/j.ceramint.2012.08.065 Cui, 2020, Cutting performance, failure mechanisms and tribological properties of GNPs reinforced Al2O3/Ti(C,N) ceramic tool in high speed turning of Inconel 718, Ceram. Int., 46, 18859, 10.1016/j.ceramint.2020.04.206 Ghosh, 2020, Tribological property investigation of self-lubricating molybdenum-based zirconia ceramic composite operational at elevated temperature, J. Tribol., 142, 10.1115/1.4045015 Hwang, 1990, Effect of a liquid phase on the superplasticity of 2-mol% Y2O3-stabilized tetragonal zirconia polycrystals, J. Am. Ceram. Soc., 73, 1626, 10.1111/j.1151-2916.1990.tb09806.x Davim, 2008, Comparative study of friction behaviourof alumina and zirconia ceramics against steel under water lubricated conditions, Int. Lubr. Tribol., 60, 178, 10.1108/00368790810881515 He, 1993, Effect of microstructure on the wear transition of zirconiatoughenedalumina, Wear, 162, 314, 10.1016/0043-1648(93)90514-M Kerkwijk, 1999, Tribological properties of nanoscale alumina – zirconia composites, Wear, 225, 1293, 10.1016/S0043-1648(98)00403-7 Kerkwijk, 2004, Friction behaviour of solid oxide lubricants as second phase in a-Al2O3 and stabilised ZrO2 composites, Wear, 256, 182, 10.1016/S0043-1648(03)00388-0 Pasaribu, 2003, Friction reduction by adding copper oxide into alumina and zirconia ceramics, Wear, 255, 699, 10.1016/S0043-1648(03)00267-9 Jianxin, 2006, Self-lubrication of sintered ceramic tools with CaF2additions in dry cutting, Int. J. Mach. Tool Manuf., 46, 957, 10.1016/j.ijmachtools.2005.07.047 Alexeyev, 1993, Mechanics of friction in self-lubricating composite materials I: mechanics of second-phase deformation and motion, Wear, 166, 41, 10.1016/0043-1648(93)90277-S Broniszewski, 2013, Al2O3–Mo cutting tools for machining hardened stainless steel, Wear, 303, 87, 10.1016/j.wear.2013.03.002 Broniszewski, 2015, Al2O3–V cutting tools for machining hardened stainless steel, Ceram. Int., 41, 14190, 10.1016/j.ceramint.2015.07.044 Singh, 2018, Correlation between microstructure and mechanical properties of YSZ/Al2O3 ceramics and its effect on high speed machining of steel, Trans. Indian Ceram. Soc., 77, 219, 10.1080/0371750X.2018.1528889 Singh, 2019, Measurement of chip morphology and multi criteria optimization of turning parameters for machining of AISI 4340 steel using Y-ZTA cutting insert, Measurement, 142, 181, 10.1016/j.measurement.2019.04.064 Singh, 2018, Development and machinability evaluation of MgO doped Y-ZTA ceramic inserts for high speed machining of steel, Mach. Sci. Technol., 22, 899, 10.1080/10910344.2017.1415937 Singh, 2016, Machinability evaluation and desirability function optimization of turning parameters for Cr2O3 doped zirconia toughened alumina (Cr-ZTA) cutting insert in high speed machining of steel machining, Ceram. Int., 42, 3338, 10.1016/j.ceramint.2015.10.128 Mondal, 2006, Novel synthesis of advanced composites of α-Al2O3 reinforced with Ce TZP through co-precipitation process, Adv. Appl. Ceram., 105, 222, 10.1179/174367606X128432 Hassanzadeh, 2016, Nanostructured CuAl2O4: co-precipitation synthesis, optical and photo catalytic properties, Ceram. Int., 42, 14121, 10.1016/j.ceramint.2016.06.026 Seidensticker, 1994, Super plasticity in 3Y-TZP doped with small amounts of copper oxide, Scr. Met. Mater., 31, 1749, 10.1016/0956-716X(94)90476-6 Ran, 2007, Effect of microstructure on the tribological and mechanical properties of CuO-doped 3Y-TZP ceramics, J. Am. Ceram. Soc., 90, 2747, 10.1111/j.1551-2916.2007.01823.x Maiti, 2018, Indentation size effect and energy balance issues in nanomechanical behavior of ZTA, Ceram. Int., 44, 9753, 10.1016/j.ceramint.2018.02.210 Oh, 2001, Fabrication of Cu dispersed Al2O3 nanocomposites using Al2O3/CuO and Al2O3/Cu-nitrate mixtures, Scr. Mater., 44, 2117, 10.1016/S1359-6462(01)00890-9 Singh, 2020, Evaluation of mechanical and frictional properties of CuO added MgO/ZTA ceramics, Mater. Res. Express, 6, 125208, 10.1088/2053-1591/ab6640 Oh, 2010, Fabrication of alumina-based metal nanocomposites by pressure less sintering and their mechanical properties, J. Nanosci. Nanotechnol., 10, 366, 10.1166/jnn.2010.1544 Budiansky, 1988, Small-scale crack bridging and the fracture toughness of particulate-reinforced ceramics, J. Mech. Phys. Solids, 36, 167, 10.1016/S0022-5096(98)90003-5 Evans, 1990, Perspective on the development of high-toughness ceramics, J. Am. Ceram. Soc., 73, 187, 10.1111/j.1151-2916.1990.tb06493.x Kumar, 2006, The effect of tool wear on tool life of alumina-based ceramic cutting tools while machining hardened martensitic stainless steel, J. Mater. Process. Technol., 173, 151, 10.1016/j.jmatprotec.2005.11.012 Evans, 1978, Impact damage in brittle materials in the elastic-plastic response regime, Proc. R. Soc. Lond. A., 361, 343, 10.1098/rspa.1978.0106 Mathew, 1982, Predicting the effects of very high cutting speeds on cutting forces, etc, Ann. CIRP, 31, 49, 10.1016/S0007-8506(07)63267-3 Sutter, 2005, Analysis of the cutting force components and friction in high speed machining, J. Manuf. Sci. Eng., 127, 245, 10.1115/1.1863253 Findley, 1963, The influence of extreme speeds and rake angles in metal cutting, ASME Trans. J. Eng. Ind., 85, 49, 10.1115/1.3667587 Jianxin, 2009, Design, fabrication and properties of a self-lubricated tool in dry cutting, Int. J. Mach. Tools Manuf., 49, 66, 10.1016/j.ijmachtools.2008.08.001 Reddy, 2011, The influence of solid lubricant for improving tribological properties in turning process, Lubr. Sci., 23, 49, 10.1002/ls.143