Performance assessment of earth pipe cooling system for low energy buildings in a subtropical climate

EIA. Energy information administration. International energy outlook; 2013. <http://www.eia.gov/forecasts/ieo/pdf/0484%282013%29.pdf> [cited on 25.03.14].

Ahasan, 2014, Performance evaluation of hybrid green roof system in a subtropical climate using fluent, J Power Energy Eng, 2, 113, 10.4236/jpee.2014.24017

Omer, 2008, Energy, environment and sustainable development, Renew Sustain Energy Rev, 12, 2265, 10.1016/j.rser.2007.05.001

Givoni, 1998

Yang, 2014, Thermal comfort and building energy consumption implications–a review, Appl Energy, 115, 164, 10.1016/j.apenergy.2013.10.062

Saman, 2013, Towards zero energy homes down under, Renew Energy, 49, 211, 10.1016/j.renene.2012.01.029

DRET. Department of Resources, Energy and Tourism. Energy in Australia; 2012. <http://www.industry.gov.au/industry/Office-of-the-Chief-Economist/Publications/Documents/energy-in-aust/energy-in-australia-2012.pdf> [cited on 15.09.14].

Ahmed, 2014, Selection of suitable passive cooling strategy for a subtropical climate, Int J Mech Mater Eng, 9, 1, 10.1186/s40712-014-0014-7

Sadineni, 2011, Passive building energy savings: a review of building envelope components, Renew Sustain Energy Rev, 15, 3617, 10.1016/j.rser.2011.07.014

Madhumathi, 2012, Experimental study of passive cooling of building facade using phase change materials to increase thermal comfort in buildings in hot humid areas, Int J Energy Environ, 3, 739

Becker, 2002, Inter-related effects of cooling strategies and building features on energy performance of office buildings, Energy Build, 34, 25, 10.1016/S0378-7788(01)00081-0

Chowdhury, 2009, Modelling and analysis of air-cooled reciprocating chiller and demand energy savings using passive cooling, Appl Therm Eng, 29, 1825, 10.1016/j.applthermaleng.2008.09.001

Ahmed SF, Khan MMK, Amanullah MTO., Rasul MG, Hassan NMS. Performance analysis of vertical earth pipe cooling system for subtropical climate. In: International conference on clean energy, Istanbul, Turkey; 2014. p. 691–700.

Ahmed, 2014, Comparison of earth pipe cooling performance between two different piping systems, Energy Procedia, 61, 1897, 10.1016/j.egypro.2014.12.237

Ahmed SF, Khan MMK, Amanullah MTO, Rasul MG, Hassan NMS. Thermal performance analysis of earth pipe cooling system for subtropical climate. In: 12th international conference on sustainable energy technologies, Hong Kong; 2013. p. 1795–803.

Lee, 2008, The cooling and heating potential of an earth tube system in buildings, Energy Build, 40, 486, 10.1016/j.enbuild.2007.04.003

Ghosal, 2006, Modeling and parametric studies for thermal performance of an earth to air heat exchanger integrated with a greenhouse, Energy Convers Manage, 47, 1779, 10.1016/j.enconman.2005.10.001

Wu, 2007, Modelling and evaluation of cooling capacity of earth–air–pipe systems, Energy Convers Manage, 48, 1462, 10.1016/j.enconman.2006.12.021

Bisoniya, 2013, Experimental and analytical studies of earth–air heat exchanger (EAHE) systems in India: a review, Renew Sustain Energy Rev, 19, 238, 10.1016/j.rser.2012.11.023

Mihalakakou, 1994, Modelling the thermal performance of earth-to-air heat exchangers, Sol Energy, 53, 301, 10.1016/0038-092X(94)90636-X

Gallero, 2015, Numerical and experimental validation of a new hybrid model for vertical ground heat exchangers, Energy Convers Manage, 103, 511, 10.1016/j.enconman.2015.07.012

Bansal, 2010, Performance analysis of earth–pipe–air heat exchanger for summer cooling, Energy Build, 42, 645, 10.1016/j.enbuild.2009.11.001

De Paepe M, Willems N. 3D unstructured modeling technique for ground-coupled air heat exchangers. In: Proceedings of the 7th international world conference CLIMA2000, Napoli. CD-rom-uitgave, paper ID 276; 2001. 15 pp.

Al-Ajmi, 2006, The cooling potential of earth-air heat exchangers for domestic buildings in a desert climate, Build Environ, 41, 235, 10.1016/j.buildenv.2005.01.027

Mongkon, 2014, Cooling performance assessment of horizontal earth tube system and effect on planting in tropical greenhouse, Energy Convers Manage, 78, 225, 10.1016/j.enconman.2013.10.076

Ahmed, 2015, 1

Mihalakakou, 1995, Parametric prediction of the buried pipes cooling potential for passive cooling applications, Sol Energy, 55, 163, 10.1016/0038-092X(95)00045-S

Benhammou, 2015, Performance analysis of an earth-to-air heat exchanger assisted by a wind tower for passive cooling of buildings in arid and hot climate, Energy Convers Manage, 91, 1, 10.1016/j.enconman.2014.11.042

Zarrella, 2015, Analysis of operating modes of a ground source heat pump with short helical heat exchangers, Energy Convers Manage, 97, 351, 10.1016/j.enconman.2015.03.059

Shen, 2015, Impact of global warming on performance of ground source heat pumps in US climate zones, Energy Convers Manage, 101, 632, 10.1016/j.enconman.2015.06.027

Krarti, 1996, Analytical model for heat transfer in an underground air tunnel, Energy Convers Manage, 37, 1561, 10.1016/0196-8904(95)00208-1

Santamouris, 1995, Use of buried pipes for energy conservation in cooling of agricultural greenhouses, Sol Energy, 55, 111, 10.1016/0038-092X(95)00028-P

Zaki AK, Amjad A-M, Almssad A. Cooling by underground earth tubes. In: 2nd PALENC conference and 28th AIVC conference on building low energy cooling and advanced ventilation technologies in the 21st century, Crete island, Greece; 2007.

Goswami D, Biseli K. Use of underground air tunnels for heating and cooling agricultural and residential buildings. Fact sheet EES 78. Fact Sheet EES1993. <http://infohouse.p2ric.org/ref/08/07683.pdf> [cited on 28.02.14].

Ahmed SF, Khan MMK, Amanullah MTO, Rasul MG, Hassan NMS. Numerical modelling of hybrid vertical earth pipe cooling system. In: The 19th Australasian fluid mechanics conference; 2014.

Jacovides, 1996, On the ground temperature profile for passive cooling applications in buildings, Sol Energy, 57, 167, 10.1016/S0038-092X(96)00072-2

Mihalakakou, 1997, On the application of the energy balance equation to predict ground temperature profiles, Sol Energy, 60, 181, 10.1016/S0038-092X(97)00012-1

ANSYS. FLUENT user’s guide; 2006. <http://aerojet.engr.ucdavis.edu/fluenthelp/html/ug/node998.htm> [cited on 23.01.15].

A. ASHRAE. Standard 55-2010: Thermal environmental conditions for human occupancy. ASHRAE. Atlanta USA; 2010.

ISO 3370. International organization for standardization. 2005. Ergonomics of the thermal environment-analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. 3rd ed.

Brown, 2001

Givoni, 1992, Comfort, climate analysis and building design guidelines, Energy Build, 18, 11, 10.1016/0378-7788(92)90047-K

BOM. Bureau of meteorology. Climate data online; 2015. <http://www.bom.gov.au/climate/data/index.shtml> [cited on 12.09.15].

Oberkampf WL, Helton JC, Sentz K. Mathematical representation of uncertainty. In: AIAA non-deterministic approaches forum; 2001. p. 16–9.

EG. Ergon energy. General supply tariffs. Tariff 11 residential; 2014. <https://www.ergon.com.au/retail/residential/tariffs-and-prices/general-supply-tariffs> [cited on 26.11.14].

Mani, 2009, Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on waste plastic oil, Energy, 34, 1617, 10.1016/j.energy.2009.07.010