Performance analysis of a thermoelectric cooler with a corrugated architecture
Tài liệu tham khảo
Riffat, 2003, Thermoelectrics: a review of present and potential applications, Appl Therm Eng, 23, 913, 10.1016/S1359-4311(03)00012-7
Mcgaughey, 2012, Modeling thermoelectric materials and devices, Am Ceram Soc Bull, 91, 34
Elsheikh, 2014, A review on thermoelectric renewable energy: principle parameters that affect their performance, Renew Sustain Energy Rev, 30, 337, 10.1016/j.rser.2013.10.027
Lee, 2013, The Thomson effect and the ideal equation on thermoelectric coolers, Energy, 56, 61, 10.1016/j.energy.2013.04.049
Disalvo, 1999, Thermoelectric cooling and power generation, Science, 285, 703, 10.1126/science.285.5428.703
Yee, 2013, $ per W metrics for thermoelectric power generation: beyond ZT, Energy Environ Sci, 6, 2561, 10.1039/C3EE41504J
Yazawa, 2011, Cost-efficiency trade-off and the design of thermoelectric power generators, Environ Sci Technol, 45, 7548, 10.1021/es2005418
Venkatasubramanian, 2001, Thin-film thermoelectric devices with high room-temperature figures of merit, Nature, 413, 597, 10.1038/35098012
Vineis, 2010, Nanostructured thermoelectrics: big efficiency gains from small features, Adv Mater, 22, 3970, 10.1002/adma.201000839
Minnich, 2009, Bulk nanostructured thermoelectric materials: current research and future prospects, Energy Environ Sci, 2, 466, 10.1039/b822664b
Zhao, 2014, A review of thermoelectric cooling: materials, modeling and applications, Appl Therm Eng, 66, 15, 10.1016/j.applthermaleng.2014.01.074
We, 2013, Improvement of thermoelectric properties of screen-printed Bi2Te3 thick film by optimization of the annealing process, J Alloy Compd, 552, 107, 10.1016/j.jallcom.2012.10.085
Lu, 2014, Fabrication of flexible thermoelectric thin film devices by inkjet printing, Small, 10, 3551, 10.1002/smll.201303126
Lee, 2011, Thermoelectric properties of screen-printed ZnSb film, Thin Solid Films, 519, 5441, 10.1016/j.tsf.2011.03.031
Sondergaard, 2013, Practical evaluation of organic polymer thermoelectrics by large-area R2R processing on flexible substrates, Energy Sci Eng, 1, 7, 10.1002/ese3.8
Hewitt, 2012, Multilayered carbon nanotube/polymer composite based thermoelectric fabrics, Nano Lett, 12, 1307, 10.1021/nl203806q
Shiozaki, 2006, Evaluation of flexible Bi(2)Te(2.5)Se(0.5) and Bi(0–5)Sb(1.5)Te(3) thermopile generator, Dev Process Technol Microelectron, Mems, Photon, Iv, 6037
Ali, 2014, Thermodynamic analysis of a thermoelectric power generator in relation to geometric configuration device pins, Energy Convers Manage, 78, 634, 10.1016/j.enconman.2013.11.029
Sahin, 2013, The thermoelement as thermoelectric power generator: effect of leg geometry on the efficiency and power generation, Energy Convers Manage, 65, 26, 10.1016/j.enconman.2012.07.020
Zheng, 2014, A review of thermoelectrics research – recent developments and potentials for sustainable and renewable energy applications, Renew Sustain Energy Rev, 32, 486, 10.1016/j.rser.2013.12.053
Schmitz, 2013, Preparation of ring-shaped thermoelectric legs from PbTe powders for tubular thermoelectric modules, J Electron Mater, 42, 1702, 10.1007/s11664-012-2402-1
Min, 2007, Ring-structured thermoelectric module, Semicond Sci Technol, 22, 880, 10.1088/0268-1242/22/8/009
Gross, 2011, Multistage planar thermoelectric microcoolers, J Microelectromech Syst, 20, 1201, 10.1109/JMEMS.2011.2163302
Min, 1999, Cooling performance of integrated thermoelectric microcooler, Solid-State Electron, 43, 923, 10.1016/S0038-1101(99)00045-3
Min, 1998, Integrated thin film thermoelectric cooler, Electron Lett, 34, 222, 10.1049/el:19980148
Volklein, 1999, Modelling of a microelectromechanical thermoelectric cooler, Sens Actuators A-Phys, 75, 95, 10.1016/S0924-4247(99)00002-3
Mayer, 2006, Optimization of heat sink-limited thermoelectric generators, Nanoscale Microscale Thermophys Eng, 10, 143, 10.1080/10893950600643063
Yadav, 2008, Fiber-based flexible thermoelectric power generator, J Power Sources, 175, 909, 10.1016/j.jpowsour.2007.09.096
Itoigawa, 2005, Fabrication of flexible thermopile generator, J Micromech Microeng, 15, S233, 10.1088/0960-1317/15/9/S10
Shelby DM, Williams FW, Mackenzie PB, Owens JT, Tanner CM, Stikeleather Peavey JL, Clear SA. Self-Currogating laminated and methods of making Them. Eastman Chemical Company. Pto, U. 61706412; 2012.
Lin, 2008, Fabrication and characterization of a three-dimensional flexible thermopile, Jpn J Appl Phys, 47, 1787, 10.1143/JJAP.47.1787
Weber, 2006, Coin-size coiled-up polymer foil thermoelectric power generator for wearable electronics, Sens Actuators A – Phys, 132, 325, 10.1016/j.sna.2006.04.054
Lee, 2013, Optimal design of thermoelectric devices with dimensional analysis, Appl Energy, 106, 79, 10.1016/j.apenergy.2013.01.052
Russel, 2013, Characterization of a thermoelectric cooler based thermal management system under different operating conditions, Appl Therm Eng, 50, 652, 10.1016/j.applthermaleng.2012.05.002
Chen, 2012, A numerical study on the performance of miniature thermoelectric cooler affected by Thomson effect, Appl Energy, 89, 464, 10.1016/j.apenergy.2011.08.022
Sharp, 2006, Overview of solid-state thermoelectric refrigerators and possible applications to on-chip thermal management, Proc IEEE, 94, 1602, 10.1109/JPROC.2006.879795
Lee, 2010
Riffat, 2001, A novel thermoelectric refrigeration system employing heat pipes and a phase change material: an experimental investigation, Renewable Energy, 23, 313, 10.1016/S0960-1481(00)00170-1
Bergman, 2011
Lineykin S, Ben-Yaakov S. PSPICE-compatible equivalent circuit of thermoelectric coolers. In: 2005 IEEE 36th Power Electronic Specialists Conference (PESC). vols 1–3, 2005. p. 608–12.
Plochmann, 2014, Optimization of thermoelectric properties of metal-oxide- based polymer composites, J Appl Polym Sci, 131, 10.1002/app.40038
Machui, 2014, Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture, Energy Environ Sci, 7, 2792, 10.1039/C4EE01222D
Kim, 2014, New device architecture of a thermoelectric energy conversion for recovering low-quality heat, Appl Phys A – Mater Sci Process, 114, 1201, 10.1007/s00339-013-7844-7
Kim, 2014, Thermoelectric properties of P-type Sb2Te3 thick film processed by a screen-printing technique and a subsequent annealing process, J Alloy Comp, 582, 177, 10.1016/j.jallcom.2013.07.195