Peculiarities of Control over Electron-Beam Additive Form Manufacturing
Tóm tắt
This work analyzes the manufacturing process of an electron-beam additive form by heating as a result of remelting the supplied filler wire as a control object. Control actions and output values are designated that can be used in constructing a control systems with feedback. A mathematical modeling technique is used to study heat transfer in a nonstationary formulation, taking into account the influence of the latent heat of fusion. The transient processes of temperature changes were studied at points, whose values can be used to estimate the extension of the weld pool and the degree of metal overheating. An analysis of the results of computational experiments is carried out, and the range of variations of control actions are shown. The possibility of an independent temperature control in the range of the beam and the extension of the liquid bath is also justified. Recommendations are given for the technical implementation of the system and the option of implementing local regulators, types of sensors, and their installation.
Tài liệu tham khảo
Hull, C.W., US Patent 4575330A, 1986.
Gibson, I., Rosen, D., and Stucker, B., Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, New York: Springer-Verlag, 2015.
Stecker, S., US Patent 8598523B2, 2013.
Taminger, K.M., Hafley, R.A., Martin, R.E., and Hofmeister, W.H., US Patent 8 452 073B2, 2013.
Zalameda, J.N., Burke, E.R., Hafley, R.A., Taminger, K.M., et al., Proc. SPIE, 2013, vol. 8705, art. ID 8705OM. doi https://doi.org/10.1117/12.2018233
Everton, S.K., Hirscha, M., Stravroulakis, P., Leach, R.K., et al., Mater. Des., 2016, vol. 95, pp. 431–445.
Kresanov, V.S., Malakhov, N.P., Morozov, V.V., et al., Vysokoeffektivnyi emitter elektromov na osnove geksaborida lantana (High-Performance Electron Emitter Based on Lanthanum Hexaboride), Moscow: Energoatomizdat, 1987.
Samarskii, A.A. and Gulin, A.V., Chislennye metody (Numerical Methods), Moscow: Nauka, 1987.
Seufzer, W.J. and Taminger, K.M., Control of space-based electron beam free form fabrication. https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20070030308.pdf.
Taminger, K.M., Hofmeister, W.H., and Hafley, R.A., US Patent 8344281B2, 2013.
Raghavan, A., Wei, H.L., Palmer, T.A., and DebRoy, T., J. Laser Appl., 2013, vol. 25, art. ID 052006. doi https://doi.org/10.2351/1.4817788