Passivity of Sanicro28 (UNS N-08028) stainless steel in polluted phosphoric acid at different temperatures studied by electrochemical impedance spectroscopy and Mott–Schottky analysis

P. Becker, Phosphates and Phosphoric Acid. Raw Materials, Technology, and Economics of the Wet Process, M. Dekker, New York, 1989. Sekine, 1994, The effect of fluoride ions on the corrosion of steel material in H2SO4 and CH3COOH solutions, Corros. Sci., 36, 1411, 10.1016/0010-938X(94)90189-9 Tzaneva, 2006, Effect of halide anions and temperature on initiation of pitting in Cr–Mn–N and Cr–Ni steels, Corros. Eng., Sci. Technol., 41, 62, 10.1179/174327806X94027 Pardo, 2006, Influence of Cr additions on corrosion resistance of Fe- and Co-based metallic glasses and nanocrystals in H2SO4, J. Non-crystal. Sol., 352, 3179, 10.1016/j.jnoncrysol.2006.05.021 El Hajjaji, 1995, The influence of alloying elements on the corrosion resistance of stainless steels in phosphoric acid medium polluted by sulphide ions, Corros. Sci., 37, 927, 10.1016/0010-938X(95)00005-5 Qiao, 2009, Electrochemical behaviour of high nitrogen bearing stainless steel in acidic chloride solution: effects of oxygen, acid concentration and surface roughness, Corros. Sci., 51, 979, 10.1016/j.corsci.2009.02.026 Ramy, 2010, Laser Raman microscopic studies of passive films formed on type 316LN stainless steels during pitting in chloride solution, Corros. Sci., 52, 2114, 10.1016/j.corsci.2010.02.028 Pardo, 2000, Influence of pH and chloride concentration on the pitting and crevice corrosion behavior of high-alloy stainless steels, Corrosion, 56, 411, 10.5006/1.3280545 Pardo, 2000, Pitting and crevice corrosion behaviour of high alloy stainless steels in chloride–fluoride solutions, Mater. Corros. – Werkstoff und korrosion, 51, 850, 10.1002/1521-4176(200012)51:12<850::AID-MACO850>3.0.CO;2-F Hakiki, 1995, The electronic structure of passive films formed on stainless steels, Corros. Sci., 37, 1809, 10.1016/0010-938X(95)00084-W Carmezim, 2005, Capacitance behaviour of passive films on ferritic and austenitic stainless steel, Corros. Sci., 47, 581, 10.1016/j.corsci.2004.07.002 Metikos-Hukovic, 2011, High corrosion resistance of austenitic stainless steel alloyed with nitrogen in an acid solution, Corros. Sci., 53, 2176, 10.1016/j.corsci.2011.02.039 Fattah-alhosseini, 2010, Effect of solution concentration on semiconducting properties of passive films formed on austenitic stainless steels, Corros. Sci., 52, 205, 10.1016/j.corsci.2009.09.003 Fattah-alhosseini, 2011, The semiconducting properties of passive films formed on AISI 316 L and AISI 321 stainless steels: a test of the point defect model (PDM), Corros. Sci., 53, 3186, 10.1016/j.corsci.2011.05.063 Ferreira, 2002, Semiconducting properties of oxide and passive films formed on AISI 304 stainless steel and Alloy 600, J. Braz. Chem. Soc., 13, 433, 10.1590/S0103-50532002000400005 Taveira, 2010, Influence of incorporated Mo and Nb on the Mott–Schottky behaviour of anodic films formed on AISI 304L, Corros. Sci., 52, 2813, 10.1016/j.corsci.2010.04.021 Sudesh, 2006, Electrochemical & optical characterisation of passive films on stainless steels, J. Phys., 28, 74 Sudesh, 2006, Tunneling relaxation of photocurrent from passive films on stainless steel, J. Electrochem. Soc., 153, B178, 10.1149/1.2186035 Fujimoto, 2007, Semiconductor properties and protective role of passive films of iron base alloys, Corros. Sci., 49, 195, 10.1016/j.corsci.2006.05.020 Lee, 2007, Semiconducting properties of passive films formed on Fe–Cr alloys using capacitance measurements and cyclic voltammetry techniques, Mater. Chem. Phys., 104, 98, 10.1016/j.matchemphys.2007.02.089 Lin, 2002, The corrosion behavior of Fe-based shape memory alloys, Corros. Sci., 44, 2013, 10.1016/S0010-938X(02)00027-6 Ibrahim, 2009, Corrosion behavior of some austenitic stainless steels in chloride environments, Mater. Chem. Phys., 115, 80, 10.1016/j.matchemphys.2008.11.016 Priyantha, 2004, An electrochemical impedance study of alloy 22 in NaCl brine at elevated temperature. I. Corrosion behavior, J. Electroanal. Chem., 572, 409, 10.1016/j.jelechem.2004.06.031 Azumi, 1987, Mott–Schottky plot of the passive film formed on iron in neutral borate and phosphate solutions, J. Electrochem. Soc., 134, 1352, 10.1149/1.2100672 Cardoso, 2008, Temperature effect in the corrosion resistance of Ni–Fe–Cr alloy in chloride medium, Corros. Sci., 50, 2429, 10.1016/j.corsci.2008.06.030 Igual-Muñoz, 2006, The effect of chromate in the corrosion behavior of duplex stainless steel in LiBr solutions, Corros. Sci., 48, 4127, 10.1016/j.corsci.2006.03.009 Pardo, 2008, Effect of Mo and Mn additions on the corrosion behaviour of ASI 304 and 316 stainless steels in H2SO4, Corros. Sci., 50, 780, 10.1016/j.corsci.2007.11.004 Pardo, 2008, Pitting corrosion behaviour of austenitic stainless steels – combining effects of Mn and Mo additions, Corros. Sci., 50, 1796, 10.1016/j.corsci.2008.04.005 Neville, 1996, An assessment of the corrosion behaviour of high-grade alloys in seawater at elevated temperature and under a high velocity impinging flow, Corros. Sci., 38, 927, 10.1016/0010-938X(96)00180-1 Drogowska, 1996, Electrooxidation of stainless steel AISI 304 in carbonate aqueous solution at pH 8, J. Appl. Electrochem., 26, 217, 10.1007/BF00364073 Drogowska, 1998, 304 Stainless steel oxidation in sulfate and sulfate + bicarbonate solutions, J. Appl. Electrochem., 28, 491, 10.1023/A:1003265127657 Zor, 2009, Corrosion behavior of G-X CrNiMoNb 18–10 austenitic stainless steel in acidic solutions, J. Alloys Compd., 480, 885, 10.1016/j.jallcom.2009.02.069 Olefjord, 1982, Composition of the surface during passivation of stainless steels, Corrosion, 38, 46, 10.5006/1.3577318 Maurice, 1998, X-Ray photoelectron spectroscopy and scanning tunneling microscopy study of passive film formed on (100) Fe–18Cr–13Ni single-crystal surfaces, J. Electrochem. Soc., 145, 909, 10.1149/1.1838366 Zhang, 2013, Influence of temperature on passive film properties on Ni–Cr–Mo Alloy C-2000, Corros. Sci., 76, 424, 10.1016/j.corsci.2013.07.016 Sánchez-Tovar, 2011, Corrosion behaviour of micro-plasma arc welded stainless steels in H3PO4 under flowing conditions at different temperatures, Corros. Sci., 53, 1237, 10.1016/j.corsci.2010.12.017 Wang, 2008, Austenitic stainless steels in high temperature phosphoric acid, J. Power Sources, 180, 803, 10.1016/j.jpowsour.2008.02.086 Sánchez-Tovar, 2012, Influence of temperature and hydrodynamic conditions on the corrosion behavior of AISI 316L stainless steel in pure and polluted H3PO4: application of the response surface methodology, Mater. Chem. Phys., 133, 289, 10.1016/j.matchemphys.2012.01.024 Excrivà-Cerdan, 2013, Effect of temperature on passive film formation of UNS N08031 Cr–Ni alloy in phosphoric acid contaminated with different aggressive anions, Electrochim. Acta, 111, 552, 10.1016/j.electacta.2013.08.040 Sánchez-Tovar, 2010, Effect of different micro-plasma arc welding (MPAW) processes on the corrosion of AISI 316L SS tubes in LiBr and H3PO4 solutions under flowing conditions, Corros. Sci., 52, 722, 10.1016/j.corsci.2009.10.032 Escrivà-Cerdán, 2012, Passivation behaviour of Alloy 31 (UNS N08031) in polluted phosphoric acid at different températures, Corros. Sci., 56, 114, 10.1016/j.corsci.2011.11.014 M. Boudalia, A. Guenbour, A. Bellaouchou, R.M. Fernandez-Domene, J. Garcia-Anton, Corrosion behaviour of a highly alloyed austenitic alloy UB6 in contaminated phosphoric acid, Int. J. Corros. (2013) article number 363–826. Blasco-Tamarit, 2011, Study of the effect of temperature on the galvanic corrosion between alloy 31 base metal and its weld in polluted phosphoric acid, Int. J. Electrochem. Sci., 6, 6224, 10.1016/S1452-3981(23)19678-7 Blasco-Tamarit, 2011, Imposed potential measurements to evaluate the pitting corrosion resistance and the galvanic behaviour of a highly alloyed austenitic stainless steel and its weldment in a LiBr solution at temperatures up to 150°C, Corros. Sci., 53, 784, 10.1016/j.corsci.2010.11.013 Guenbour, 2006, Study of corrosion–erosion behaviour of stainless alloys in industrial phosphoric acid medium, Appl. Surf. Sci., 253, 2362, 10.1016/j.apsusc.2006.05.005 Prabakaran, 2009, Electrochemical, SEM and XPS investigations on phosphoric acid treated surgical grade type 316L SS for biomédical applications, J. Appl. Electrochem., 39, 887, 10.1007/s10800-008-9738-5 Escrivà-Cerdán, 2012, Effect of potential formation on the electrochemical behaviour of a highly alloyed austenitic stainless steel in contaminated phosphoric acid at different températures, Electrochim. Acta, 80, 248, 10.1016/j.electacta.2012.07.012 Iken, 2007, Classic and local analysis of corrosion behaviour of graphite and stainless steels in polluted phosphoric acid, Electrochim. Acta, 52, 2580, 10.1016/j.electacta.2006.09.013 Kirchheim, 1990, Compositional changes of passive films due to different transport rates and preferential dissolution, Corros. Sci., 31, 573, 10.1016/0010-938X(90)90164-Z Heusler, 1990, Growth and dissolution of passivating films, Corros. Sci., 31, 597, 10.1016/0010-938X(90)90168-5 Bouchemel, 2009, Corrosion behaviour of Ti40Cu60 alloy in H3PO4 solutions, Mater. Chem. Phys., 115, 572, 10.1016/j.matchemphys.2008.12.030 Almeida, 1997, The influence of the interfacial conditions on rust conversion by phosphoric acid, Corros. Sci., 39, 1561, 10.1016/S0010-938X(97)00058-9 Marcus, 1998, Surface science approach of corrosion phenomena, Electrochim. Acta, 43, 109, 10.1016/S0013-4686(97)00239-9 DeJager, 2001, The dehydration of phosphates monitored by DSC/TGA and in situ Raman spectroscopy, Thermochim. Acta, 376, 187, 10.1016/S0040-6031(01)00582-2 Corbridge, 1980 Reffass, 2009, Effects of phosphate species on localized corrosion of steel in NaHCO3+NaCl electrolytes, Electrochim. Acta, 54, 4389, 10.1016/j.electacta.2009.03.014 Moraes, 2003, Corrosion protection of stainless steel by polyaniline electrosynthesized from phosphate buffer solutions, Prog. Org. Coat., 48, 28, 10.1016/S0300-9440(03)00075-4 Deabate, 2000, X-ray diffraction and micro-Raman spectroscopy analysis of new nickel hydroxide obtained by electrodialysis, J. Power Sources, 87, 125, 10.1016/S0378-7753(99)00437-1 Oblonsky, 1995, A surface enhanced Raman spectroscopic study of the passive films formed in borate buffer on iron, nickel, chromium and stainless steel, Corros. Sci., 37, 17, 10.1016/0010-938X(94)00102-C Maslar, 2001, In situ Raman spectroscopic investigation of chromium surfaces under hydrothermal conditions, Appl. Surf. Sci., 180, 102, 10.1016/S0169-4332(01)00338-5 Brug, 1984, The analysis of electrode impedances complicated by the presence of a constant phase élément, J. Electroanal. Chem., 176, 275, 10.1016/S0022-0728(84)80324-1 Orazem, 2006, Enhanced graphical representation of electrochemical impedance data, J. Electrochem. Soc., 153, B129, 10.1149/1.2168377 Lukacs, 1997, The numerical evaluation of the distortion of EIS data due to the distribution of parameters, J. Electroanal. Chem., 432, 79, 10.1016/S0022-0728(97)00217-9 Lukacs, 1999, Evaluation of model and dispersion parameters and their effects on the formation of constant-phase elements in equivalent circuits, J. Electroanal. Chem., 464, 68, 10.1016/S0022-0728(98)00471-9 MacDonald, 1985, Generalizations of “universal dielectric response” and a general distribution-of-activation-energies model for dielectric and conducting systems, J. Appl. Phys., 58, 1971, 10.1063/1.336004 MacDonald, 1985, Frequency response of unified dielectric and conductive systems involving an exponential distribution of activation énergies, J. Appl. Phys., 58, 1955, 10.1063/1.336003 MacDonald, 1994, Power-law exponents and hidden bulk relation in the impedance spectroscopy of solids, J. Elecroanal. Chem., 378, 17, 10.1016/0022-0728(94)87053-5 Hirschorn, 2010, Determination of effective capacitance and film thickness from constant-phase-element parameters, J. Electrochimica Acta, 55, 6218, 10.1016/j.electacta.2009.10.065 Hirschorn, 2010, Constant-phase-element behavior caused by resistivity distribution in films, J. Electrochem. Soc., 157, C452, 10.1149/1.3499564 Huang, 2007, The global and local impedance response of a blocking disk electrode with local constant-phase-element behavior, J. Electrochem. Soc., 154, C89, 10.1149/1.2398889 Feng, 2010, Passivity of 316L stainless steel in borate buffer solution studied by Mott–Schottky analysis, atomic absorption spectroscopy and X-ray photoelectron spectroscopy, Corros. Sci., 52, 3646, 10.1016/j.corsci.2010.07.013 Orazem, 2013, Dielectric properties of materials showing Constant-Phase-Element (CPE) impédance response, J. Electrochem. Soc., 160, C215, 10.1149/2.033306jes Seyeux, 2013, Oxide film growth kinetics on metals and alloys, J. Electrochem. Soc., 160, C189, 10.1149/2.036306jes Sunseri, 1990, Photocurrent spectroscopic investigations of passive films on chromium, J. Electrochem. Soc., 137, 2411, 10.1149/1.2086952 Dean, 1989, The electronic properties of disordered passive films, Corros. Sci., 29, 199, 10.1016/0010-938X(89)90030-9 MacDonald, 1990, An electrochemical impedance analysis of passive films on nickel (111) in phosphate buffer solutions, Electrochim. Acta, 35, 1949, 10.1016/0013-4686(90)87104-A MacDonald, 1992, Point defect model for the passive state, J. Electrochem. Soc., 139, 3434, 10.1149/1.2069096 Fattah-Alhosseini, 2012, Passivity of AISI 321 stainless steel in 0.5 M H2SO4 solution studied by Mott–Schottky analysis in conjunction with the point defect model, Arab. J. Chem., 10.1016/j.arabjc.2012.02.015