Passivity of 316L stainless steel in borate buffer solution studied by Mott–Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy

Nicic, 2008, The passivity of Type 316L stainless steel in borate buffer solution, J. Nucl. Mater., 379, 54, 10.1016/j.jnucmat.2008.06.014 Turnbull, 2003, Corrosion and electrochemical behaviour of 316L stainless steel in acetic acid solutions, Corros. Sci., 45, 1051, 10.1016/S0010-938X(02)00149-X Kuczynska-Wydorska, 2008, Corrosion and passivation of low-temperature nitrided AISI 304L and 316L stainless steels in acidified sodium sulphate solution, Corros. Sci., 50, 523, 10.1016/j.corsci.2007.07.003 Huang, 2006, TEM investigation of intergranular stress corrosion cracking for 316 stainless steel in PWR environment, Acta Mater., 54, 635, 10.1016/j.actamat.2005.10.011 Lu, 2008, The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment, Corros. Sci., 50, 698, 10.1016/j.corsci.2007.08.022 Xu, 2008, Cracking initiation mechanism for low cycle fatigue of type 316Ti stainless steel in high temperature water, Mater. Sci. Eng. A, 490, 16, 10.1016/j.msea.2007.12.043 West, 2009, IGSCC of grain boundary engineered 316L and 690 in supercritical water, J. Nucl. Mater., 392, 264, 10.1016/j.jnucmat.2009.03.008 Fukuya, 2008, Fracture behavior of austenitic stainless steels irradiated in PWR, J. Nucl. Mater., 378, 211, 10.1016/j.jnucmat.2008.06.028 Da Cunha Belo, 1998, Composition, structure and properties of the oxide films formed on the stainless steel 316L in a primary type PWR environment, Corros. Sci., 40, 447, 10.1016/S0010-938X(97)00158-3 Gao, 2007, Charaterization of oxide films grown on 316L stainless steel exposed to H2O2-containing supercritical water, J. Supercrit. Fluids, 42, 157, 10.1016/j.supflu.2006.12.020 Vankeerberghen, 2009, Crack propagation rate modeling for 316 SS exposed to PWR-relevant conditions, J. Nucl. Mater., 384, 274, 10.1016/j.jnucmat.2008.11.034 Shieu, 1998, Microstructure and corrosion resistance of a type 316L stainless steel, Corros. Sci., 40, 1267, 10.1016/S0010-938X(97)00143-1 Mottu, 2005, Structure and composition effects on pitting corrosion resistance of austenitic stainless steel after molybdenum ion implanatation, Surf. Coat. Technol., 200, 2131, 10.1016/j.surfcoat.2004.12.017 Sun, 2005, Ehancement in corrosion resistance of austenitic stainless steels by surface alloying with nitrogen and carbon, Mater. Lett., 59, 3410, 10.1016/j.matlet.2005.06.005 Sun, 2009, Effects of temperature on the oxide film properties of 304 stainless steel in high temperature lithium borate buffer solution, Corros. Sci., 51, 2840, 10.1016/j.corsci.2009.08.006 Ziemniak, 2002, Corrosion behavior of 304 stainless steel in high temperature, hydrogenated water, Corros. Sci., 44, 2209, 10.1016/S0010-938X(02)00004-5 Shintani, 2008, XPS studies on passive film formed on stainless steel in a high-temperature and high-pressure methanol solution containing chloride ions, Corros. Sci., 50, 2840, 10.1016/j.corsci.2008.07.006 Montemor, 2000, Chemical composition and electronic structure of the oxide films formed on 316L stainless steel and nickel based alloys in high temperature aqueous environments, Corros. Sci., 42, 1635, 10.1016/S0010-938X(00)00012-3 Masuda, 2007, SKFM observation of SCC on SUS 304 stainless steel, Corros. Sci., 49, 120, 10.1016/j.corsci.2006.05.014 Nishimura, 2004, SCC evaluation of type 304 and 316 austenitic stainless steels in acidic chloride solutions using the slow strain rate technique, Corros. Sci., 46, 769, 10.1016/j.corsci.2003.08.001 Nishimura, 2007, Characterization and perspective of stress corrosion cracking of austenitic stainless steels (type 304 and type 316) in acid solutions using constant load method, Corros. Sci., 49, 81, 10.1016/j.corsci.2006.05.011 Terachi, 2008, Corrosion behavior of stainless steel in simulated PWR primary water: effect of chromium content in alloys and dissolved hydrogen, J. Nucl. Sci. Technol., 45, 975, 10.3327/jnst.45.975 Carmezim, 2005, Capacitance behaviour of passive films on ferritic and austenitic stainless steel, Corros. Sci., 47, 581, 10.1016/j.corsci.2004.07.002 Hakiki, 2000, Semiconducting properties of thermally grown oxide films on AISI 304 stainless steel, Corros. Sci., 42, 687, 10.1016/S0010-938X(99)00082-7 Sudesh, 2006, Electrochemical and optical characterisation of passive films on stainless steels, J. Phys., 28, 74 Meng, 2008, Effects of corrosion product deposit on the subsequent cathodic and anodic reactions of X-70 steel in near-neutral pH solution, Corros. Sci., 50, 3116, 10.1016/j.corsci.2008.08.026 Jang, 2006, In situ study on the effects of Ni and Mo on the passive film formed on Fe–20Cr alloys by photoelectrochemical and Mott–Schottky techniques, J. Electroanal. Chem., 590, 120, 10.1016/j.jelechem.2006.02.031 Meng, 2006, The corrosion behavior of Fe–10Cr nanocrystalline coating, Electrochim. Acta, 51, 4277, 10.1016/j.electacta.2005.12.015 Fujimoto, 2007, Semiconductor properties and protective role of passive films of iron base alloys, Corros. Sci., 49, 195, 10.1016/j.corsci.2006.05.020 Lee, 2007, Semiconducting properties of passive films formed on Fe–Cr alloys using capacitance measurements and cyclic voltammetry techniques, Mater. Chem. Phys., 104, 98, 10.1016/j.matchemphys.2007.02.089 Lin, 2002, The corrosion behavior of Fe-based shape memory alloys, Corros. Sci., 44, 2013, 10.1016/S0010-938X(02)00027-6 Fattah-alhosseini, 2010, Effect of solution concentration on semiconducting properties of passive films formed on austenitic stainless steels, Corros. Sci., 52, 205, 10.1016/j.corsci.2009.09.003 Yang, 2007, Theoretical and experimental studies of the pitting of type 316L stainless steel in borate buffer solution containing nitrate ion, Electrochim. Acta, 52, 1871, 10.1016/j.electacta.2006.07.052 Dan, 2010, Effects of hydrogen on the anodic behavior of Alloy 690 at 60°C, Corros. Sci., 52, 1228, 10.1016/j.corsci.2009.11.039 Huang, 2009, Influence of pH on electrochemical properties of passive films formed on Alloy 690 in high temperature aqueous environments, Corros. Sci., 51, 2976, 10.1016/j.corsci.2009.08.002 Urquidi-Macdonald, 1986, Application of Kramers–Kronig transforms in the analysis of electrochemical impedance data, J. Electrochem. Soc., 133, 2018, 10.1149/1.2108332 Shin, 1988, Concerning the use of the Kramers–Kronig transforms for the validation of impedance data, Corros. Sci., 28, 933, 10.1016/0010-938X(88)90040-6 Urquidi-Macdonald, 1990, Applications of Kramers–Kronig transforms in the analysis of electrochemical impedance data-III. Stability and linearity, Electrochim. Acta, 35, 1559, 10.1016/0013-4686(90)80010-L Akram, 2009, On some basics of linear systems theory, Systems Control Lett., 58, 83, 10.1016/j.sysconle.2008.08.004 Kramers, 1927, La diffusion de la lumiere par les atomes, Atti del Congresso Internazinale dei Fisici, Como, 2, 545 Kronig, 1926, On the theory of dispersion of X-rays, J. Opt. Soc. Am., 12, 547, 10.1364/JOSA.12.000547 Zaban, 1997, Electric potential distribution and short-range screening in nanoporous TiO electrodes, J. Phys. Chem. B, 101, 7985, 10.1021/jp971857u Brug, 1984, The analysis of electrode impedances complicated by the presence of a constant phase element, J. Electroanal. Chem., 176, 275, 10.1016/S0022-0728(84)80324-1 Sikora, 1996, A new method for estimating the diffusivities of vacancies in passive films, Eletrochim. Acta, 41, 783, 10.1016/0013-4686(95)00312-6 Simoes, 1990, Study of passive films formed on AISI 304 stainless steel by impedance measurements and photoelectrochemistry, J. Electrochem. Soc., 137, 82, 10.1149/1.2086444 Guo, 2006, Non-Faraday material loss in flowing corrosive solution, Electrochim. Acta, 51, 5341, 10.1016/j.electacta.2006.02.018 Vautrin-UI, 2007, Mesoscopic modelling of corrosion phenomena: coupling between electrochemical and mechanical processes, analysis of the deviation from the Faraday law, Electrochim. Acta, 52, 5368, 10.1016/j.electacta.2007.02.051 Morrison, 1980 Schmuki, 1998, Electrochemical behaviour of Cr2O3/Fe2O3 artificial passive films studied by in situ XANES, J. Electrochem. Soc., 145, 791, 10.1149/1.1838347 Sugimoto, 1993, Corrosion resistance of artificial passivation films of Fe2O3–Cr2O3–NiO formed by metalorganic chemical vapor deposition, J. Electrochem. Soc., 140, 1586, 10.1149/1.2221606 Ningshen, 2007, Semiconducting and passive film properties of nitrogen-containing type 316LN stainless steels, Corros. Sci., 49, 481, 10.1016/j.corsci.2006.05.041 Sunseri, 1990, Photocurrent spectroscopic investigation of passive films on Chromium, J. Electrochem. Soc., 137, 2411, 10.1149/1.2086952 Hakiki, 1995, The electronic structure of passive films formed on stainless steels, Corros. Sci., 37, 1809, 10.1016/0010-938X(95)00084-W Azumi, 1987, Mott–Schottky plot of the passive film formed on iron in neutral borate and phosphate solutions, J. Electrochem. Soc., 134, 1352, 10.1149/1.2100672 Maximovitch, 1996, Influence of formation conditions on impedance properties of nickel passive layers formed in 1M KOH, Electrochim. Acta, 41, 2761, 10.1016/0013-4686(96)00135-1 Virtanen, 2003, Electrochemical behaviour of surface films formed on Fe in chromate solutions, Corros. Sci., 45, 1405, 10.1016/S0010-938X(02)00242-1 Wang, 1992, Electrochemical study of isopoly- and heteropoly-oxometallate film modified microelectrodes – parts 2. Electrochemical behaviour of isopolymolybdic acid monolayer modified carbon fibre microelectrodes, Electrochim. Acta, 37, 1859, 10.1016/0013-4686(92)85091-X Sakashita, 1977, The effects of molybdate anion on the ion-selectivity of hydrous ferric oxide films in chloride solutions, Corros. Sci., 17, 473, 10.1016/0010-938X(77)90003-8 Searson, 1990, A photoelectrochemical study of the passive film on chromium, Electrochim. Acta, 35, 445, 10.1016/0013-4686(90)87026-X Sudesh, 2008, Photocurrent and capacitance investigations into the nature of the passive films on austenitic stainless steels, Corros. Sci., 50, 23, 10.1016/j.corsci.2007.06.009 Ye, 2009, The improvement of the corrosion resistance of 309 stainless steel in the transpassive region by nano-crystallization, Electrochim. Acta, 54, 1339, 10.1016/j.electacta.2008.08.073 Bojinov, 2000, Coupling between ionic defect structure and electronic conduction in passive films on iron, chromium and iron–chromium alloys, Electrochim. Acta, 45, 2029, 10.1016/S0013-4686(99)00423-5 Shirley, 1972, High-resolution X-ray photoemission spectrum of the valence bands of gold, Phys. Rev. B, 5, 4709, 10.1103/PhysRevB.5.4709 Haupt, 1986, XPS and ISS examinations of electrode surface and passive layers with a specimen transfer in a closed system, Surf. Interf. Anal., 9, 357, 10.1002/sia.740090603 Moulder, 1992 Xiong, 2000, Synergy between α-Sb2O4 and Fe2(MoO4)3 during the first hours of the catalytic oxidation of isonbutene to methacrolein, J. Mol. Catal. A: Chem., 155, 59, 10.1016/S1381-1169(99)00319-2 Huang, 2009, The surface evolution of a catalyst jointly influenced by thermal spreading and solid-state reaction: a case study with an Fe2O3–MoO3 system, J. Mol. Catal. A: Chem., 302, 48, 10.1016/j.molcata.2008.11.033