Passive building energy savings: A review of building envelope components
Tóm tắt
Từ khóa
Tài liệu tham khảo
D&R International. Buildings energy data book, buildings technologies program, energy efficiency and renewable energy, U.S. Department of Energy; 2009.
Cheung, 2005, Energy-efficient envelope design for high-rise apartments, Energy and Buildings, 37, 37, 10.1016/j.enbuild.2004.05.002
Chan, 1998, Energy impact of commercial-building envelopes in the sub-tropical climate, Applied Energy, 60, 21, 10.1016/S0306-2619(98)00021-X
Balaras, 2000, Potential for energy conservation in apartment buildings, Energy and Buildings, 31, 143, 10.1016/S0378-7788(99)00028-6
Price, 1995, Thermal response of composite building envelopes accounting for thermal radiation, Energy Conversion and Management, 36, 23, 10.1016/0196-8904(94)00037-Z
John, 2005, Sustainable building solutions: a review of lessons from the natural world, Building and Environment, 40, 319, 10.1016/j.buildenv.2004.05.011
Abdou, 1996, Thermal performance evaluation of a prefabricated fiber-reinforced plastic building envelope system, Energy and Buildings, 24, 77, 10.1016/0378-7788(95)00967-1
Goodhew, 2005, Sustainable earth walls to meet the building regulations, Energy and Buildings, 37, 451, 10.1016/j.enbuild.2004.08.005
Capeluto, 2003, Energy performance of the self-shading building envelope, Energy and Buildings, 35, 327, 10.1016/S0378-7788(02)00105-6
Christian JE, Kosny J. Thermal Performance and wall ratings; 2006
Aelenei, 2008, Analysis of the condensation risk on exterior surface of building envelopes, Energy and Buildings, 40, 1866, 10.1016/j.enbuild.2008.04.003
Zalewski, 1997, Experimental thermal study of a solar wall of composite type, Energy and Buildings, 25, 7, 10.1016/S0378-7788(96)00974-7
Sharma, 1989, Vary-therm wall for cooling/heating of buildings in composite climate, International Journal of Energy Research, 13, 733, 10.1002/er.4440130612
Zalewski, 2002, Study of solar walls—validating a simulation model, Building and Environment, 37, 109, 10.1016/S0360-1323(00)00072-X
Ji, 2009, An improved approach for the application of Trombe wall system to building construction with selective thermo-insulation façades, Chinese Science Bulletin, 54, 1949, 10.1007/s11434-009-0353-6
Zrikem, 1986, Theoretical study of a non-convective trombe wall collector with honeycomb structure, Solar & Wind Technology, 3, 33, 10.1016/0741-983X(86)90046-9
Jie, 2007, Modeling of a novel Trombe wall with PV cells, Building and Environment, 42, 1544, 10.1016/j.buildenv.2006.01.005
Tyagi, 2007, PCM thermal storage in buildings: a state of art, Renewable and Sustainable Energy Reviews, 11, 1146, 10.1016/j.rser.2005.10.002
Tunç, 1991, Passive solar heating of buildings using a fluidized bed plus Trombe wall system, Applied Energy, 38, 199, 10.1016/0306-2619(91)90033-T
Nayak, 1987, Transwall versus Trombe wall: relative performance studies, Energy Conversion and Management, 27, 389, 10.1016/0196-8904(87)90117-8
Al-Jabri, 2005, Concrete blocks for thermal insulation in hot climate, Cement and Concrete Research, 35, 1472, 10.1016/j.cemconres.2004.08.018
Ciampi, 2003, Ventilated facades energy performance in summer cooling of buildings, Solar Energy, 75, 491, 10.1016/j.solener.2003.09.010
Athienitis, 1997, Investigation of the thermal performance of a passive solar test-room with wall latent heat storage, Building and Environment, 32, 405, 10.1016/S0360-1323(97)00009-7
Kuznik, 2009, Experimental assessment of a phase change material for wall building use, Applied Energy, 86, 2038, 10.1016/j.apenergy.2009.01.004
Robinson, 1994, Advanced glazing technology for low energy buildings in the UK, Renewable Energy, 5, 298, 10.1016/0960-1481(94)90387-5
Singh, 2009, Energy rating of different glazings for Indian climates, Energy, 34, 1986, 10.1016/j.energy.2009.08.013
Hammarberg, 2003, Antireflection treatment of low-emitting glazings for energy efficient windows with high visible transmittance, Thin Solid Films, 442, 222, 10.1016/S0040-6090(03)00986-6
Bahaj, 2008, Potential of emerging glazing technologies for highly glazed buildings in hot arid climates, Energy and Buildings, 40, 720, 10.1016/j.enbuild.2007.05.006
Sullivan, 1996, Energy performance of evacuated glazings in residential buildings, Transactions—American Society of Heating Refrigerating and Air Conditioning Engineers, 102, 220
Garrison, 1995, Manufacture and cost of vacuum glazing, Solar Energy, 55, 151, 10.1016/0038-092X(95)00046-T
Manz, 2006, Triple vacuum glazing: heat transfer and basic mechanical design constraints, Solar Energy, 80, 1632, 10.1016/j.solener.2005.11.003
Papaefthimiou, 2006, Energy performance assessment of an electrochromic window, Thin Solid Films, 502, 257, 10.1016/j.tsf.2005.07.294
Gustavsen, 2008, Developing low-conductance window frames: capabilities and limitations of current window heat transfer design tools—state-of-the-art review, Journal of Building Physics, 32, 131, 10.1177/1744259108097672
Gaffin, 2005, Energy balance modeling applied to a comparison of white and green roof cooling efficiency
Sanjay, 2008, Passive cooling techniques of buildings: past and present—a review, ARISER, 4, 37
Halwatura, 2008, Thermal performance of insulated roof slabs in tropical climates, Energy and Buildings, 40, 1153, 10.1016/j.enbuild.2007.10.006
Alvarado, 2009, Passive cooling systems for cement-based roofs, Building and Environment, 44, 1869, 10.1016/j.buildenv.2008.12.012
Ahmad, 2010, Performance of antisolar insulated roof system, Renewable Energy, 35, 36, 10.1016/j.renene.2009.07.022
Han, 2009, Investigation on the thermal performance of different lightweight roofing structures and its effect on space cooling load, Applied Thermal Engineering, 29, 2491, 10.1016/j.applthermaleng.2008.12.024
Ciampi, 2005, Energy analysis of ventilated and microventilated roofs, Solar Energy, 79, 183, 10.1016/j.solener.2004.08.014
Tang, 2006, Thermal performance of non air-conditioned buildings with vaulted roofs in comparison with flat roofs, Building and Environment, 41, 268, 10.1016/j.buildenv.2005.01.008
Liu, 2006, Green, reflective, and photovoltaic roofs, Construction Canada, 48, 44
Akbari, 2005, Monitoring the energy-use effects of cool roofs on California commercial buildings, Energy and Buildings, 37, 1007, 10.1016/j.enbuild.2004.11.013
LBNL's cool roofing materials database. http://eetd.lbl.gov/coolroofs/.
Castleton, 2010, Green roofs: building energy savings and the potential for retrofit, Energy and Buildings, 42, 1582, 10.1016/j.enbuild.2010.05.004
Wong, 2003, The effects of rooftop garden on energy consumption of a commercial building in Singapore, Energy and Buildings, 35, 353, 10.1016/S0378-7788(02)00108-1
Wong, 2003, Investigation of thermal benefits of rooftop garden in the tropical environment, Building and Environment, 38, 261, 10.1016/S0360-1323(02)00066-5
Liu K, Minor J. Performance evaluation of an extensive green roof. Presentation at Green Rooftops for Sustainable Communities, Washington DC, pp. 1–11.
Niachou, 2001, Analysis of the green roof thermal properties and investigation of its energy performance, Energy and Buildings, 33, 719, 10.1016/S0378-7788(01)00062-7
Eumorfopoulou, 1998, The contribution of a planted roof to the thermal protection of buildings in Greece, Energy and Buildings, 27, 29, 10.1016/S0378-7788(97)00023-6
Alcazar SS, Bass B. Energy performance of green roofs in a multi-storey residential building in Madrid. Proceedings of 3rd annual conference on greening rooftops for sustainable communities.
Lazzarin, 2005, Experimental measurements and numerical modelling of a green roof, Energy and Buildings, 37, 1260, 10.1016/j.enbuild.2005.02.001
Bahaj, 2003, Photovoltaic roofing: issues of design and integration into buildings, Renewable Energy, 28, 2195, 10.1016/S0960-1481(03)00104-6
Ben Cheikh, 2004, Passive cooling by evapo-reflective roof for hot dry climates, Renewable Energy, 29, 1877, 10.1016/j.renene.2003.12.021
Papadopoulos, 2005, State of the art in thermal insulation materials and aims for future developments, Energy and Buildings, 37, 77, 10.1016/j.enbuild.2004.05.006
Bolattürk, 2008, Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey, Building and Environment, 43, 1055, 10.1016/j.buildenv.2007.02.014
Low, 1984, The Degradation of thermal insulating mineral fibers, Journal of Building Physics, 8, 116, 10.1177/109719638400800206
Kandola, 1996, Flame-retardant treatments of cellulose and their influence on the mechanism of cellulose pyrolysis, Journal of Macromolecular Science. Part C. Polymer Review, 36, 721, 10.1080/15321799608014859
Al-Homoud, 2005, Performance characteristics and practical applications of common building thermal insulation materials, Building and Environment, 40, 353, 10.1016/j.buildenv.2004.05.013
Baetens, 2010, Vacuum insulation panels for building applications: a review and beyond, Energy and Buildings, 42, 147, 10.1016/j.enbuild.2009.09.005
Antinucci, 1992, Passive and hybrid cooling of buildings – state of the art – PB – Taylor & Francis, International Journal of Solar Energy, 11, 251, 10.1080/01425919208909744
Balaras, 1996, The role of thermal mass on the cooling load of buildings. An overview of computational methods, Energy and Buildings, 24, 1, 10.1016/0378-7788(95)00956-6
Yang, 2008, Cooling load reduction by using thermal mass and night ventilation, Energy and Buildings, 40, 2052, 10.1016/j.enbuild.2008.05.014
Brown, 1990, Optimization of thermal mass in commercial building applications, Journal of Solar Energy Engineering, 112, 273, 10.1115/1.2929934
Wong, 2010, Investigating the impact of thermal mass on building performance using computational simulation, 2010 IEEE international conference on advanced management science (ICAMS), 11, 10.1109/ICAMS.2010.5553307
Muruganantham, 2010, Experimental investigation of a bio-based phase change material to improve building energy performance, 979
Feldman, 1989, Fatty acids and their mixtures as phase-change materials for thermal energy storage, Solar Energy Materials, 18, 201, 10.1016/0165-1633(89)90054-3
Feldman, 1989, Energy storage composite with an organic PCM, Solar Energy Materials, 18, 333, 10.1016/0165-1633(89)90058-0
Persily, 2009, Effects of air infiltration and ventilation, moisture control in buildings
Sfakianaki, 2008, Air tightness measurements of residential houses in Athens, Greece, Building and Environment, 43, 398, 10.1016/j.buildenv.2007.01.006
Baker, 1987, Air flow through cracks, Building and Environment, 22, 293, 10.1016/0360-1323(87)90022-9
Walker, 1998, A comparison of the power law to quadratic formulations for air infiltration calculations, Energy and Buildings, 27, 293, 10.1016/S0378-7788(97)00047-9
Klems, 1983, Methods of estimating air infiltration through windows, Energy and Buildings, 5, 243, 10.1016/0378-7788(83)90012-9
Persily, 1999, Myths about building envelopes, ASHRAE Journal, 41, 39
Liu, 2001, Modeling pollutant penetration across building envelopes, Atmospheric Environment, 35, 4451, 10.1016/S1352-2310(01)00218-7
Liu, 2003, Particle penetration through building cracks, Aerosol Science and Technology, 37, 565, 10.1080/02786820300927
Crawley, 2008, Contrasting the capabilities of building energy performance simulation programs, Building and Environment, 43, 661, 10.1016/j.buildenv.2006.10.027
Dols, 2001, A tool for modeling airflow & contaminant transport, ASHRAE Journal, 43, 35
Balaras, 2002, Infrared thermography for building diagnostics, Energy and Buildings, 34, 171, 10.1016/S0378-7788(01)00105-0
Madding, 1999, Emissivity measurement and temperature correction accuracy considerations, Proceedings of SPIE, 393, 10.1117/12.342307
Wray C, Walker I, Siegel J, Sherman M. Practical diagnostics for evaluating residential commissioning metrics. Lawrence Berkeley National Laboratory: Lawrence Berkeley National Laboratory. LBNL paper LBNL-45959; 2002.
EN 13829. Hellenic Standard. Thermal performance of buildings—determination of air permeability of buildings—fan pressurization method.
Genge, 1994, Repair of faults in building envelopes, Journal of Building Physics, 18, 81, 10.1177/109719639401800106
Burton, 1992, The Building envelope: a maintenance challenge, Journal of Building Physics, 16, 134, 10.1177/109719639201600205
Minor, 1994, Windborne debris and the building envelope, Journal of Wind Engineering and Industrial Aerodynamics, 53, 207, 10.1016/0167-6105(94)90027-2
Lam, 2005, Residential building envelope heat gain and cooling energy requirements, Energy, 30, 933, 10.1016/j.energy.2004.07.001
Florides, 2002, Measures used to lower building energy consumption and their cost effectiveness, Applied Energy, 73, 299, 10.1016/S0306-2619(02)00119-8
Gieseler, 2004, Evaluation of the cost efficiency of an energy efficient building, Renewable Energy, 29, 369, 10.1016/S0960-1481(03)00254-4