Partial oxidation of vacuum residue over Al and Zr-doped α-Fe2O3 catalysts

Khalil, 2016, Robust surface-modified Beta zeolite for selective production of lighter fuels by steam-assisted catalytic cracking from heavy oil, Fuel, 168, 61, 10.1016/j.fuel.2015.11.085 Chen, 2008, Study of oxygenated biomass fuel blends on a diesel engine, Fuel, 87, 3462, 10.1016/j.fuel.2008.04.034 Murugesan, 2009, Bio-diesel as an alternative fuel for diesel engines–A review, Renew Sust Energ Rev, 13, 653, 10.1016/j.rser.2007.10.007 Ghashghaee, 2017, A novel consecutive approach for the preparation of Cu–MgO catalysts with high activity for hydrogenation of furfural to furfuryl alcohol, Catal Lett, 147, 318, 10.1007/s10562-016-1948-6 Rajasekar, 2010, Review of NOx reduction technologies in CI engines fuelled with oxygenated biomass fuels, Renew Sust Energ Rev, 14, 2113, 10.1016/j.rser.2010.03.005 Angeles, 2014, A review of experimental procedures for heavy oil hydrocracking with dispersed catalyst, Catal Today, 220–222, 274, 10.1016/j.cattod.2013.08.016 Hosseinpour, 2016, Deuterium tracing study of unsaturated aliphatics hydrogenation by supercritical water in upgrading heavy oil. Part I: non-catalytic cracking, J Supercrit Fluid, 107, 278, 10.1016/j.supflu.2015.08.004 Hur, 2014, Hydrocracking of vacuum residue into lighter fuel oils using nanosheet-structured WS2 catalyst, Fuel, 137, 237, 10.1016/j.fuel.2014.07.094 Khalil, 2016, Production of lighter hydrocarbons by steam-assisted catalytic cracking of heavy oil over silane-treated beta zeolite, Energ Fuel, 30, 1304 Menoufy, 2014, A comparative study on hydrocracking and hydrovisbreaking combination for heavy vacuum residue conversion, Fuel, 119, 106, 10.1016/j.fuel.2013.11.017 León, 2016, Reactivity study on thermal cracking of vacuum residues, J Phys: Conf Ser, 687, 12094 Ghashghaee, 2015, Predictive correlations for thermal upgrading of petroleum residues, J Anal Appl Pyrol, 115, 326, 10.1016/j.jaap.2015.08.013 Souza, 2015, Kinetic modeling of the thermal cracking of a Brazilian vacuum residue, Energ Fuel, 29, 3024, 10.1021/acs.energyfuels.5b00412 Stratiev, 2014, Reactivity and stability of vacuum residual oils in their thermal conversion, Fuel, 123, 133, 10.1016/j.fuel.2014.01.043 AlHumaidan, 2013, Studies on thermal cracking behavior of vacuum residues in Eureka process, Fuel, 109, 635, 10.1016/j.fuel.2013.02.036 Jafari Fesharaki, 2013, Comparison of four nanoporous catalysts in thermocatalytic upgrading of vacuum residue, J Anal Appl Pyrol, 102, 97, 10.1016/j.jaap.2013.03.009 Asgharzadeh Shishavan, 2011, Investigation of kinetics and cracked oil structural changes in thermal cracking of Iranian vacuum residues, Fuel Process Technol, 92, 2226, 10.1016/j.fuproc.2011.07.008 Huang, 2013, Synthesis gas production from biomass gasification using steam coupling with natural hematite as oxygen carrier, Energy, 53, 244, 10.1016/j.energy.2013.02.068 Serrano, 2017, Chemical looping combustion of liquid fossil fuels in a 1kWth unit using a Fe-based oxygen carrier, Fuel Process Technol, 160, 47, 10.1016/j.fuproc.2017.02.015 Rydén, 2013, Chemical-looping combustion with liquid fuels, Energy Procedia, 37, 654, 10.1016/j.egypro.2013.05.153 Kopytov, 2013, Thermal transformations of high molecular mass components of heavy petroleum residues, Petrol Chem, 53, 14, 10.1134/S0965544113010076 Golovko, 2015, Cracking of heavy oils using catalytic additives based on coal fly ash ferrospheres, Catal Ind, 7, 293, 10.1134/S2070050415040078 Moldenhauer, 2017, Chemical-looping combustion with heavy liquid fuels in a 10 kW pilot plant, Fuel Process Technol, 156, 124, 10.1016/j.fuproc.2016.10.027 Mattisson, 2001, The use of iron oxide as an oxygen carrier in chemical-looping combustion of methane with inherent separation of CO2, Fuel, 80, 1953, 10.1016/S0016-2361(01)00051-5 Uddin, 2008, Catalytic decomposition of biomass tars with iron oxide catalysts, Fuel, 87, 451, 10.1016/j.fuel.2007.06.021 Park, 2014, Surface treatment effects on CO oxidation reactions over Co, Cu, and Ni-doped and codoped CeO2 catalysts, Chem Eng J, 250, 25, 10.1016/j.cej.2014.03.070 Liang, 2009, Template preparation of nanoscale CexFe1−xO2 solid solutions and their catalytic properties for ethanol steam reforming, J Mater Chem, 19, 1417, 10.1039/b817942e McFarland, 2013, Catalysis by doped oxides, Chem Rev, 113, 4391, 10.1021/cr300418s Nolan, 2009, Molecular adsorption on the doped (110) ceria surface, J Phys Chem C, 113, 2425, 10.1021/jp809292u Krcha, 2012, Periodic trends of oxygen vacancy formation and C-H bond activation over transition metal-doped CeO2 (111) surfaces, J Catal, 293, 103, 10.1016/j.jcat.2012.06.010 Ge, 2015, Effect of co-precipitation and impregnation on K-decorated Fe2O3/Al2O3 oxygen carrier in chemical looping combustion of bituminous coal, Chem Eng J, 262, 1065, 10.1016/j.cej.2014.10.021 Zhang, 2010, Preparation, characterization and hydrotreating performances of ZrO2–Al2O3–supported NiMo catalysts, Catal Today, 149, 62, 10.1016/j.cattod.2009.04.012 Barrett, 1951, The determination of pore volume and area distributions in porous substances. I. Computations from nitrogen isotherms, J Am Chem Soc, 73, 373, 10.1021/ja01145a126 Ghashghaee, 2017, Kinetic models for hydroconversion of furfural over the ecofriendly Cu-MgO catalyst: an experimental and theoretical study, Appl Catal A, 545, 134, 10.1016/j.apcata.2017.07.040 Zhang, 2014, Bifunctional catalyst for petroleum residue cracking gasification, Fuel, 117, 1196, 10.1016/j.fuel.2013.07.048 Newnham, 2012, Highly stable and active Ni-mesoporous alumina catalysts for dry reforming of methane, Int J Hydrogen Energ, 37, 1454, 10.1016/j.ijhydene.2011.10.036 Laosiripojana, 2005, Catalytic dry reforming of methane over high surface area ceria, Appl Catal B, 60, 107, 10.1016/j.apcatb.2005.03.001 Yu, 2012, Preparation and characterization of Fe-doped TiO2 nanoparticles as a support for a high performance CO oxidation catalyst, J Mater Chem, 22, 12629, 10.1039/c2jm30360d Cao, 2008, Mesoporous CuO–Fe2O3 composite catalysts for low-temperature carbon monoxide oxidation, Appl Catal B, 79, 26, 10.1016/j.apcatb.2007.10.005 Xia, 2011, Three-dimensionally ordered and wormhole-like mesoporous iron oxide catalysts highly active for the oxidation of acetone and methanol, J Hazard Mater, 186, 84, 10.1016/j.jhazmat.2010.10.073 Gu, 2014, Enhanced reducibility and redox stability of Fe2O3 in the presence of CeO2 nanoparticles, RSC Adv, 4, 47191, 10.1039/C4RA06715K Youn, 2010, Hydrogen production by auto-thermal reforming of ethanol over nickel catalyst supported on metal oxide-stabilized zirconia, Int J Hydrogen Energ, 35, 3490, 10.1016/j.ijhydene.2010.01.121 Hu, 2013, Carbon deposition on Ni/ZrO2–CeO2 catalyst during steam reforming of acetic acid, Int J Hydrogen Energ, 38, 6033, 10.1016/j.ijhydene.2012.12.141 Ren, 2015, Methanation of carbon dioxide over Ni–M/ZrO2 (M=Fe Co, Cu) catalysts: Effect of addition of a second metal, Fuel Process Technol, 137, 204, 10.1016/j.fuproc.2015.04.022 Stelmachowski, 2015, The role of crystallite size of iron oxide catalyst for soot combustion, Catal Today, 257, 111, 10.1016/j.cattod.2015.02.018 Zhu, 2014, Chemical-looping steam methane reforming over a CeO2–Fe2O3 oxygen carrier: evolution of its structure and reducibility, Energ Fuel, 28, 754, 10.1021/ef402203a Liu, 2010, Modulated CO oxidation activity of M-doped ceria (M=Cu, Ti, Zr, and Tb): role of the Pauling electronegativity of M, J Phys Chem C, 114, 9889, 10.1021/jp101939v Chang, 2016, Raman vibrations and photovoltaic conversion in rare earth doped (Bi0.93RE0.07)FeO3 (RE=Dy, Gd, Eu, Sm) ceramics, Ceram Int, 42, 834, 10.1016/j.ceramint.2015.09.005 Cao, 2002, XPS characterization of xα-Fe2O3−(1−x)ZrO2 for oxygen gas sensing application, Mater Chem Phys, 75, 67, 10.1016/S0254-0584(02)00032-9 Dupin, 2000, Systematic XPS studies of metal oxides, hydroxides and peroxides, Phys Chem Chem Phys, 2, 1319, 10.1039/a908800h Aronniemi, 2007, XPS study on the correlation between chemical state and oxygen-sensing properties of an iron oxide thin film, Appl Surf Sci, 253, 9476, 10.1016/j.apsusc.2007.06.007 Kawabe, 2000, A ES, Yamaguchi Y. Photoemission study of dissociatively adsorbed methane on a pre-oxidized SnO2 thin film, Surf Sci, 2–3, 101, 10.1016/S0039-6028(99)00997-8 Tabata, 2003, Yousuke. Chemisorbed oxygen species over the (110) face of SnO2, Catal Surv Asia, 7, 251, 10.1023/B:CATS.0000008164.21582.92 Yamaguchi, 2000, A density functional theory study of the interaction of oxygen with a reduced SnO2 (110) surface, Chem Phys Lett, 5–6, 477, 10.1016/S0009-2614(99)01365-2 Kondoh, 2016, Upgrading of oil sand bitumen over an iron oxide catalyst using sub- and super-critical water, Fuel Process Technol, 145, 96, 10.1016/j.fuproc.2016.01.030 Puron, 2014, Kinetic analysis of vacuum residue hydrocracking in early reaction stages, Fuel, 117, 408, 10.1016/j.fuel.2013.09.053 Wagloehner, 2012, Study on the mechanism of the oxidation of soot on Fe2O3 catalyst, Appl Catal B, 125, 158, 10.1016/j.apcatb.2012.05.032