Part 1: Design, modeling and simulation of post-combustion CO2capture systems using reactive solvents

Carbon Management - Tập 2 Số 3 - Trang 265-288 - 2011
Bin Liu1,2, Teerawat Sanpasertparnich1, Paitoon Tontiwachwuthikul1,2, Don Gelowitz1, Raphael Idem1
1International Test Centre for CO2 Capture, Faculty of Engineering and Applied Science, University of Regina, 3737 Wascana Parkway, Regina, Saskatchewan, S4S0A2, Canada
2Joint International Center for CO2 Capture, Storage and Utilization (iCCS), Department of Chemical Engineering, Hunan University, Changsha, 410082, People's Republic of China

Tóm tắt

Từ khóa


Tài liệu tham khảo

International Energy Agency (IEA). World Energy Outlook. (2002).

Gray, 2005, Fuel Process. Technol., 86, 1449, 10.1016/j.fuproc.2005.01.005

Yang WC, Ciferno J. Assessment of carbozyme enzyme-based membrane technology for CO2capture from flue gas. DOE/NETL 401/072606 (2006).

Anderson, 2006, J. Phys. Chem. B., 110, 15059, 10.1021/jp063547u

Metz B, Davidson O, deConinck H, Loos M, Meyer L. IPCC special report on carbon dioxide capture and storage. Intergovernmental Panel on Climate Change, Cambridge University Press, UK (2005).

Dooley JJ, Davidson CL, Dahowski RT. An assessment of the commercial availability of carbon dioxide capture and storage technologies as of June 2009. Pacific Northwest National Laboratory, US DOE. (2009).

Figueroa, 2008, Int. J. Greenhouse Gas Control., 2, 9, 10.1016/S1750-5836(07)00094-1

Thitakamol, 2007, Int. J. Greenhouse Gas Control., 1, 318, 10.1016/S1750-5836(07)00042-4

Alie CF. CO2Capture with MEA: integrating the absorption process and steam cycle of an existing coal-fired power plant. MSc thesis. University of Waterloo, Canada (2004).

Fisher KS, Beitler C, Rueter C, Searcy K, Rochelle G, Jassim M. Integrating MEA regeneration with CO2compression and peaking to reduce CO2capture costs. US DOE. (2005).

Rao, 2006, Ind. Eng. Chem. Res., 45, 2421, 10.1021/ie050603p

Abu-Zahra, 2007, Int. J. Greenhouse Gas Control., 1, 37, 10.1016/S1750-5836(06)00007-7

Romeo, 2008, Appl. Therm. Eng., 28, 1039, 10.1016/j.applthermaleng.2007.06.036

Adams, 2009, Energy Procedia., 1, 3801, 10.1016/j.egypro.2009.02.181

Luo, 2009, Energy Procedia., 1, 1249, 10.1016/j.egypro.2009.01.164

Sanpasertparnich, 2010, Int. J. Greenhouse Gas Control., 4, 499, 10.1016/j.ijggc.2009.12.005

Pfaff, 2010, Energy, 35, 4030, 10.1016/j.energy.2010.06.004

Tontiwachwuthikul P, Meisen A, Lim CJ. Methodologies for designing packed acid gas absorbers with chemical reaction: a review.Int. Conf. on Adv. Sci. & Technol. Exch. Bangkok, Thailand (1994).

Tontiwachwuthikul, 1989, Can. J. Chem. Eng., 67, 602, 10.1002/cjce.5450670412

Tontiwachwuthikul P. New pilot plant technique for sizing gas absorbers with chemical reactions. PhD. Thesis. University of British Columbia, Canada (1991).

Kohl A, Nielsen R.Gas Purification(5th Edition), Gulf Publishing, Texas, UK (1997).

Weiland RH. Physical properties of MEA, DEA, MDEA and MDEA-based blends loaded with CO2. GPA Research Report No. 152. (1996).

Weiland, 1998, J. Chem. Eng. Data., 43, 378, 10.1021/je9702044

ProMax 2.0. ProMax®Level I & II. Bryan Research & Engineering, Inc. (2008).

Aspen Plus. EAP101 Aspen Plus®: Process Modeling. (2009).

Kister HZ.Distillation Design. McGraw-Hill. NY, USA (1992).

Perry RH, Green D. Perry’s chemical engineers’ handbook. (6thEdition). Mcgraw-Hill. NY, USA (1984).

Billet R.Packed Towers in Processing and Environmental Technology. VCH. NY, USA (1995).

Astarita G. Mass transfer with chemical reaction. Elsevier Publishing. NY, USA (1967).

Danckwerts PV.Gas Liquid Reactions. McGraw Hill. NY, USA (1970).

Joshi, 1981, Chem. Eng. Symp. Series., 77, 63

Treybal, 1969, Ind. Eng. Chem., 61, 36, 10.1021/ie50715a009

10.1080/00986448308956351

Kelly, 1984, Ind. Eng. Chem. Process Des. Dev., 23, 102, 10.1021/i200024a017

Raal, 1973, Can. J. Chem. Eng., 51, 162, 10.1002/cjce.5450510204

Barth, 1984, Chem. Eng. Sci., 39, 1753, 10.1016/0009-2509(84)80110-4

Austgen, 1989, Ind. Eng. Chem. Res., 28, 1060, 10.1021/ie00091a028

Morsi BI, Charpentier JC. Solubilities and diffusivities of gases in liquids. ASI Series. 72 (1981).

Rase HF.Chemical Reactor Design for Process Plants: Volume 1 – Principles and Techniques. John Wiley & Sons, NY, USA (1977).

Astarita G, Savage DW, Bisio A.Gas Treating with Chemical Solvents. John Wiley & Sons. NY, USA (1983).

DeCoursey, 1989, Chem. Eng. Sci., 44, 1715, 10.1016/0009-2509(89)80013-2

Winkelman, 1992, Chem. Eng. Sci., 47, 485, 10.1016/0009-2509(92)80038-E

DeCoursey, 1982, Chem. Eng. Sci., 37, 1483, 10.1016/0009-2509(82)80005-5

Danckwerts, 1975, Trans. Instn. Chem. Engrs., 53, 34

Alper, 1976, Chem. Eng. Sci., 31, 599, 10.1016/0009-2509(76)80023-1

Laurent A, Charpentier JC. The string of spheres column with pools: a new experimental laboratory apparatus to simulate the process of gas–liquid absorption with chemical reaction in an industrial packed column.Proc. Conf. Appl. Chem. Unit Oper. Processes(3rdedition) 419–429 (1977).

Danckwerts, 1966, Trans. Instn. Chem. Eng., 44, 42

Sanpasertparnich T, Idem R, Tontiwachwuthikul T. CO2absorption in an absorber column with a series of intercooler circuits.Proceedings of:The 10thInternational Conference on Greenhouse Gas Control Technologies, Amsterdam, Netherlands, 19–23 September 2010.

Veawab A. Corrosion in CO2capture unit for coal-fired power plant flue gas. Greenhouse Gas Control Technologies:Proceeding of:The 6thInternational Conference on Greenhouse Gas Control Technologies, 1–4 October 2002.

Sanpasertparnich T. Monte Carlo simulation of pulverized coal-fired power plants: efficiency improvement and CO2capture options. MSc thesis. University of Regina, Canada (2007).

Liang Z. Optimization of post-combustion amine-based carbon dioxide capture process to minimize heat requirements for solvent regeneration. PhD thesis. University of Regina, Canada (2010).