Parametric study and performance evaluation of an organic Rankine cycle (ORC) system using low-grade heat at temperatures below 80 °C

Roy, 2010, Parametric optimization and performance analysis of a waste heat recovery system using Organic Rankine Cycle, Energy, 35, 5049, 10.1016/j.energy.2010.08.013 pei, 2011, Construction and dynamic test of a small-scale organic Rankine cycle, Energy, 36, 3215, 10.1016/j.energy.2011.03.010 BCS Inc, Waste heat recovery: technologies and opportunities in U.S. industry, US Dept. of Energy (DOE); 2008. Wang, 2013, Efficiency and optimal performance evaluation of organic Rankine cycle for low grade waste heat power generation, Energy, 50, 343, 10.1016/j.energy.2012.11.010 Mills, 2004, Advances in solar thermal electric technology, Sol Energy, 76, 10.1016/S0038-092X(03)00102-6 Chacartegui, 2007, Alternative ORC bottoming cycles for combined cycle power plants, Appl Energy, 86, 2162, 10.1016/j.apenergy.2009.02.016 Maraver, 2013, Assessment of CCHP systems based on biomass combustion for small-scale applications through a review of the technology and analysis of energy efficiency parameters, Appl Energy, 102, 1303, 10.1016/j.apenergy.2012.07.012 Zhang, 2011, Performance comparison and parametric optimization of subcritical organic Rankine cycle (ORC) and transcritical power cycle system for low-temperature geothermal power generation, Appl Energy, 88, 2740, 10.1016/j.apenergy.2011.02.034 Wang, 2010, A comparative study of pure and zeotropic mixtures in low-temperature solar Rankine cycle, Appl Energy, 87, 3366, 10.1016/j.apenergy.2010.05.016 Gu, 2009, Theoretical and experimental investigation of an organic Rankine cycle for a waste heat recovery system, J. Power and energy, 223, 523, 10.1243/09576509JPE725 Hung, 2010, A study of organic working fluids on system efficiency of an ORC using low-grade energy sources, Energy, 35, 1403, 10.1016/j.energy.2009.11.025 Quoilin, 2013, Techno-economic survey of Organic Rankine Cycle (ORC) systems, Renew Sustain Energy Rev, 22, 168, 10.1016/j.rser.2013.01.028 He, 2012, The optimal evaporation temperature and working fluids for subcritical organic Rankine cycle, Energy, 38, 136, 10.1016/j.energy.2011.12.022 Tchanche, 2009, Fluid selection for a low-temperature solar organic Rankine cycle, Appl Therm Eng, 29, 2468, 10.1016/j.applthermaleng.2008.12.025 Wang, 2012, Fluid selection and parametric optimization of organic Rankine cycle using low temperature waste heat, Energy, 40, 107, 10.1016/j.energy.2012.02.022 Wang, 2013, Thermodynamic analysis and optimization of an (organic Rankine cycle) ORC using low grade heat source, Energy, 49, 356, 10.1016/j.energy.2012.11.009 Srinivasan, 2010, Analysis of exhaust waste heat recovery from a dual fuel low temperature combustion engine using an Organic Rankine Cycle, Energy, 35, 2387, 10.1016/j.energy.2010.02.018 Zhang, 2011, Performance comparison and parametric optimization of subcritical Organic Rankine Cycle (ORC) and transcritical power cycle system for low-temperature geothermal power generation, Appl Energy, 88, 2740, 10.1016/j.apenergy.2011.02.034 Quoilin, 2010, Experimental study and modeling of an organic Rankine cycle using scroll expander, Appl Energy, 87, 1260, 10.1016/j.apenergy.2009.06.026 Qiu, 2012, Selection of working fluids for micro-CHP systems with ORC, Renew Energy, 48, 565, 10.1016/j.renene.2012.06.006 Park, 2015, Review: general issues and correlations for predicting flow boiling heat transfer coefficients in micro-scale channels, Int J Air-cond Refrig, 23, 1550003-1, 10.1142/S2010132515300037 Hsieh, 2002, Saturated flow boiling heat transfer and pressure drop of refrigerant R-410a in vertical plate heat exchanger, Int J Heat Mass Transf, 45, 1033, 10.1016/S0017-9310(01)00219-8 Kuo, 2005, Condensation heat transfer and pressure drop of refrigerant R-410a flow in a vertical plate heat exchanger, Int J Heat Mass Transf, 48, 5205, 10.1016/j.ijheatmasstransfer.2005.07.023 Lemort, 2009, Testing and modeling a scroll expander integrated into an organic Rankine cycle, Appl Therm Eng, 29, 3094, 10.1016/j.applthermaleng.2009.04.013 Ro, 2009 Incropera, 2002 Moraal, 1999, Turbocharger modeling for automotive control applications, Soc Automot Eng, 1, 1 Kim, 2015, Experimental and computational study on the dynamic interaction between load variation and back pressure control in a polymer electrolyte membrane fuel cell for automotive application, Int J Hydrog, 40, 12370, 10.1016/j.ijhydene.2015.07.101 Quoilin, 2011 Jige, 2015, Experimental study on condensation heat transfer and flow modes of R245fa on enhanced surface tubes, Int J Air-cond Refrig, 23, 1550014-1, 10.1142/S2010132515500145