Parametric sensitivity analyses for FEA of hot steel forging

Maillard, 1992, Simulation of cold forging by a 2D elastoplastic finite element method with automatic remeshing, J. Mater. Process. Technol., 34, 93, 10.1016/0924-0136(92)90094-9 Oh, 1982, Finite element analysis of metal forming problems with arbitrarily shaped dies, Int. J. Mech. Sci., 24, 479, 10.1016/0020-7403(82)90058-3 Coupez, 1991, 3D finite element modelling of the forging process with automatic remeshing, J. Mater. Process. Technol., 27, 119, 10.1016/0924-0136(91)90048-J Yang, 1991, A three-dimensional rigid-plastic finite element analysis of spur gear forging using the modular remeshing technique, Proc. Inst. Mech. Eng., 205, 353 Majerus, 1997, Quantitative data for precision, closed-die, forging: internal deformations and computer simulation, Int. J. Mach. Tools Manuf., 37, 523, 10.1016/S0890-6955(95)00060-7 Ou, 1998, Preform design for forging of aerofoil sections using FE simulation, J. Mater. Process. Technol., 80–81, 144, 10.1016/S0924-0136(98)00102-2 Saigal, 1995, Forging of compression blades: temperature and ram velocity effects, Trans. ASME, 117, 528 F.H. Norton, Creep of Steel at High Temperature, McGraw-Hill, New York, 1929. Hoff, 1959, Approximate analysis of structures in the presence of moderately large steps deformation, Quart. Appl. Math., 2, 49 A. Hensel, T. Spittel, Kraftsund Arbeitsbebarf Bildsamer Formgebungverfahren, VEB Deuttsher Verlay fur Grundstoff Industrie, Leipzig, 1978. S. Kobayashi, S. Oh, T. Altan, Metal Forming and the Finite Element Method, Oxford University Press, Oxford, 1989, p. 32. Burte, 1990, Measurement and analysis of heat transfer and friction during hot forging, Trans. ASME, 112, 332, 10.1115/1.2899596 W.G. Cochran, G.M. Cox, Experimental Designs, second ed., Wiley, New York, 1968, p. 158. Snape, 1998, Sensitivity of finite element analysis of forging to input parameters, J. Mater. Process. Technol., 82, 21, 10.1016/S0924-0136(98)00005-3