Parametric optimization of EDM process on α–β brass using Taguchi approach

La Fontaine, A. and Keast, V.J., Compositional distributions in classical and lead-free brasses, Mater. Ch., 2006, vol. 57, pp. 424–429.

Sun, Y.F., Xu, N., and Fujii, H., The microstructure and mechanical properties of friction stir welded Cu–30Zn brass alloys, Mater. Sci. Eng. A, 2014, vol. 589, pp. 228–234.

Amirat, M., Zaïdi, H., Djamaï, A., Necib, D., and Eyidi, D., Influence of the gas environment on the transferred film of the brass (Cu64Zn36)/steel AISI 1045 couple, Wear, 2009, vol. 267, pp. 433–440.

Gao, Y., Nakata, K., Nagatsuka, K., Shibata, Y., and Amano, M., Optimizing tool diameter for friction stir welded brass/steel lap joint, J. Mater. Process. Technol., 2016, vol. 229, pp. 313–321.

Shufeng Li, Hisashi Imai, Haruhiko Atsumi, and Katsuyoshi Kondoh, Contribution of Ti addition to characteristics of extruded Cu40Zn brass alloy prepared by powder metallurgy, Mater. Design., 2011, vol. 32, pp. 192–197.

Nobel, Ch., Hofmann, U., Klocke, F., Veselovac, D., and Pul, H., Application of a new, severe-condition friction test method to understand the machining characteristics of Cu–Zn alloys using coated cutting tools, Wear, 2015, vol. 344–345, pp. 58–68.

Rajesh Khanna, Anish Kumar, Mohinder Pal Garg, Ajit Singh, and Neeraj Sharma, Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory, Int. J. Ind. Eng., 2015, vol. 11, pp. 459–472.

George, P.M., Raghunath, B.K.m Manocha, L.M., and Ashish M., EDM machining of carbon–carbon composite—A Taguchi approach, J. Mater. Process. Technol., 2004, vol. 145, pp. 66–71.

George, P.M., Raghunath, B.K., Manocha, L.M., and Ashish M., EDM machining of carbon–carbon composite—A Taguchi approach, J. Mater. Process. Technol., 2004, vol. 145, pp. 66–71.

Yih-fong Tzeng and Fu-chen Chen, Multi-objective optimisation of high-speed electrical discharge machining process using a Taguchi fuzzy-based approach, Mater. Design., 2007, vol. 28, pp. 1159–1168.

Nanimina, A. Mouangue, Abdul-Rani, A.M., Ahmad, F., Zainuddin, A., and Jason, Lo SH., Effects of electro-discharge machining on aluminum metal matrix composite, J. Appl. Sci., 2011, vol. 11, pp. 1668–1672.

Senthil, P., Vinodh Sekar, and Adarsh Kumar Singh, Parametric optimization of EDM on Al–Cu/TiB2 insitu metal matrix composites using TOPSIS method, Int. J. Mach. Machine. Mater., 2014, vol. 16, pp. 80–94.

Radhika, N., Kishore Chandran, G., Shivaram, P., and Vijay Kumar, K.T., Multi-objective optimization of EDM parameters using grey relational analysis, J. Eng. Sci. Technol., 2015, vol. 10, pp. 1–11.

Sidhu, S.S., Kumar, S., and Batish, A., Electric discharge machining of 10 vol % Al2O3/Al metal matrix composite—An experimental study, Mater. Sci. Forum., 2013, vol. 751, pp. 9–19.

Rengasamy, N.V., Rajkumar, M., and Senthil Kumaran, S., An analysis of mechanical properties and optimization of EDM process parameters of Al 4032 alloy reinforced with Zrb2 and Tib2 in-situ composites, J. Alloy. Compd., 2015, vol. 662, pp. 325–338.

El-Taweel, T.A., Multi-response optimization of EDM with Al-Cu-Si-TiC P/M composite electrode, Int. J. Adv. Manuf. Technol., 2009, vol. 44, pp. 100–113.

Patel, K.M., Pulak M., and Venkateswara Rao, P., Determination of an optimum parametric combination using a surface roughness prediction model for EDM of Al2O3/SiCw/TiC ceramic composite, J. Mater. Manuf. Proc., 2009, vol. 24, p. 675.

Narender Singh, P., Raghukandan, K., and Pai, B.C., Optimization by grey relational analysis of EDM parameters on machining Al–10% SiC composites, J. Mater. Proc. Technol., 2004, vol. 155, p. 1658.

Che-Chung Wang, Han-Ming Chow, Lieh-Dai Yang, and Chun-Te Lu, Recast layer removal after electrical discharge machining via Taguchi analysis: A feasibility study, J. Mater. Process. Technol., 2009, vol. 209, pp. 4134–4140.

Ugrasen, G., Ravindra, H.V., Naveen Prakash, G.V., and Theertha Prasad, Y.N., Optimization of process parameters in wire EDM of HCHCr material using Taguchi’s technique, Mater. Today: Proc., 2015, vol. 2, pp. 2443–2452.

Sushant Dhar, Rajesh Purohit, Nishant Saini, Akhil Sharma, and Hemath Kumar, G., Mathematical modeling of electric discharge machining of cast Al–4Cu–6Si alloy—10 wt % SiCP composites, J. Mater. Process. Technol., 2007, vol. 194, pp. 24–29.

Balamurugan, M., Biswanath, M., and Sukamal, G., Optimisation of machining parameters for hard machining: grey relational theory approach and ANOVA, Int. J. Adv. Manuf. Technol., 2009, vol. 45, pp. 1068–1086.

Ravichandran, M. and Anandakrishnan, V., Optimization of P/M parameters to attain maximum strength in Al–10 wt %MoO3 composite, J. Mater. Res., 2015, vol. 30, pp. 2380–2387.