Parametric analysis of non-linear suspension system by optimal MR damper by rider model with sensor
Tóm tắt
The MR damper parameters used in the vehicle model correspond to a real-world damper and are chosen so that the MR damper model characteristics match those of the experimental damper. The control and response statistics of a non-linear vehicle model utilising an MR damper are produced iteratively using the equivalent linearization method, and the findings are validated using rider optimisation (RO) simulation modelling. The suggested technique is easy to use, robust and well-suited for solving highly non-linear situations. The optimal parameters-arrived performance measure is examined, including ride comfort, tyre force, and protentional power, as well as the optimal design specifications for the front and rear dampers. The optimal control using preview reduces a performance index, which is a collection of vehicle performance parameters such as mass acceleration, displacement and both front and rear suspension stiffness. The results reveal that the developed RO algorithm is capable of determining the optimal parameters of the MR dampers.
Tài liệu tham khảo
Ali, S. F., & Ramaswamy, A. (2009). Hybrid structural control using magnetorheological dampers for base-isolated structures. Smart Materials and Structures, 18(5), 055011.
Azar, B. F., Veladi, H., Talatahari, S., & Raeesi, F. (2020). Optimal design of magnetorheological damper based on tuning Bouc-Wen model parameters using hybrid algorithms. KSCE Journal of Civil Engineering, 24, 867–878.
Boada, M. J. L., Calvo, J. A., Boada, B. L., & Díaz, V. (2011). Modelling of a magnetorheological damper by recursive lazy learning. International Journal of Non-Linear Mechanics, 46(3), 479–485.
Boreiry, M., Ebrahimi-Nejad, S., & Marzbanrad, J. (2019). Sensitivity analysis of chaotic vibrations of a full vehicle model with magnetorheological damper. Chaos, Solitons & Fractals, 127, 428–442.
Dai, L., Fang, C., Lu, H., Liu, X., Hua, D., & Yang, Y. (2023). Research on structure design and control method of magnetorheological suspension based on improved fruit fly optimization algorithm. Machines, 11(2), 273.
Deng, H., Gao, Y., Hu, R., Zhao, S., Han, G., Lian, X., & Zhong, X. (2021). Self-sensing automotive magnetorheological dampers for low-frequency vibration. Smart Materials and Structures, 30(11), 115015.
Guo, D. L., Hu, H. Y., & Yi, J. Q. (2004). Neural network control for a semi-active vehicle suspension with a magnetorheological damper. Journal of Vibration and Control, 10(3), 461–471.
Jia, H., Yun, C., & Wang, Y. (2019). August). Dynamic characteristics analysis of nonlinear suspension system of automobile with seven degrees of freedom. Journal of physics: conference series (Vol. 1303, p. 012049). Bristol: IOP Publishing.
Kaveh, A. (2017). Applications of metaheuristic optimization algorithms in civil engineering. New York: Springer.
Kaveh, A., Izadifard, R. A., & Mottaghi, L. (2020). Optimal design of planar RC frames considering CO2 emissions using ECBO, EVPS and PSO metaheuristic algorithms. Journal of Building Engineering, 28, 101014.
Kaveh, A., Kalateh-Ahani, M., & Fahimi-Farzam, M. (2013). Constructability optimal design of reinforced concrete retaining walls using a multi-objective genetic algorithm. Structural Engineering and Mechanics, 47(2), 227–245.
Kaveh, A., Mohammadi, S., Khadem Hosseini, O., Keyhani, A., & Kalatjari, V. R. (2015b). Optimum parameters of tuned mass dampers for seismic applications using charged system search. Iranian Journal of Science and Technology, C1(39), 21–40.
Kaveh, A., Pirgholizadeh, S., & Khadem Hosseini, O. (2015a). Semi-active tuned mass damper performance with optimized fuzzy controller using CSS algorithm. Asian Journal of Civil Engineering, 16(5), 587–606.
Koulocheris, D., Papaioannou, G., & Christodoulou, D. (2017, April). Optimal design solution among pareto alternatives for vehicle nonlinear suspension system. In Proceedings of the 26th International Automotive Conference “Science and Motor Vehicles”(26th JUMV), Belgrade, Serbia (pp. 19–20)
Krishna, M. M., Panda, N., & Majhi, S. K. (2021). Solving traveling salesman problem using hybridization of rider optimization and spotted hyena optimization algorithm. Expert Systems with Applications, 183, 115353.
Li, S., Yang, S., & Guo, W. (2004). Investigation on chaotic motion in hysteretic non-linear suspension system with multi-frequency excitations. Mechanics Research Communications, 31(2), 229–236.
Llopis-Albert, C., Rubio, F., & Zeng, S. (2023). A multiobjective optimization framework for designing a vehicle suspension system. A comparison of optimization algorithms. Advances in Engineering Software, 176, 103375.
Mohammed, M., & Alktranee, M. H. (2021). Parametric analysis of vehicle suspension based on air spring and MR damper with semi-active control. Journal of physics: conference series (Vol. 1773, p. 012022). Bristol: IOP Publishing.
Mohd, A., & Srivastava, R. (2021). Parametric optimization and experimental validation for nonlinear characteristics of passenger car suspension system. Periodica Polytechnica Transportation Engineering, 49(2), 103–113.
Mohebbi, M., & Bagherkhani, A. (2014). Optimal design of magneto-rheological dampers. International Journal of Optimization in Civil Engineering, 4(3), 361–380.
Mohite, A. G., & Mitra, A. C. (2018). Development of linear and non-linear vehicle suspension model. Materials Today: Proceedings, 5(2), 4317–4326.
Nagarkar, M. P., Bhalerao, Y. J., Vikhe Patil, G. J., & Zaware Patil, R. N. (2018). GA-based multi-objective optimization of active nonlinear quarter car suspension system—PID and fuzzy logic control. International Journal of Mechanical and Materials Engineering, 13, 1–20.
Nugroho, P. W., Li, W., Du, H., Alici, G., & Yang, J. (2014). An adaptive neuro fuzzy hybrid control strategy for a semiactive suspension with magneto rheological damper. Advances in Mechanical Engineering, 6, 487312.
Pan, H., Jing, X., & Sun, W. (2017). Robust finite-time tracking control for nonlinear suspension systems via disturbance compensation. Mechanical Systems and Signal Processing, 88, 49–61.
Pang, H., Liu, F., & Xu, Z. (2018). Variable universe fuzzy control for vehicle semi-active suspension system with MR damper combining fuzzy neural network and particle swarm optimization. Neurocomputing, 306, 130–140.
Shastry, G., Toby, A., Kumbhar, M. B., Salunkhe, V. G., & Jagadeesha, T. (2021). Simulation and optimization of materials used for prosthetic leg for above-knee amputees using MR fluid. Materials Today: Proceedings, 45, 5292–5298.
Song, X., Ahmadian, M., Southward, S., & Miller, L. (2007). Parametric study of nonlinear adaptive control algorithm with magneto-rheological suspension systems. Communications in Nonlinear Science and Numerical Simulation, 12(4), 584–607.
Tharehalli Mata, G., Mokenapalli, V., & Krishna, H. (2021). Performance analysis of MR damper based semi-active suspension system using optimally tuned controllers. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 235(10–11), 2871–2884.
Wang, G., Yuan, Y., & Guo, W. (2019). An improved rider optimization algorithm for solving engineering optimization problems. Ieee Access, 7, 80570–80576.
Yang, J., Ning, D., Sun, S. S., Zheng, J., Lu, H., Nakano, M., & Li, W. H. (2021). A semi-active suspension using a magnetorheological damper with nonlinear negative-stiffness component. Mechanical Systems and Signal Processing, 147, 107071.
Yıldız, A. S., Sivrioğlu, S., Zergeroğlu, E., & Çetin, Ş. (2015). Nonlinear adaptive control of semi-active MR damper suspension with uncertainties in model parameters. Nonlinear Dynamics, 79, 2753–2766.
Zhu, M., Fu, J., Li, W., Xia, D., Qi, S., & Yu, M. (2021). Design and co-optimization of a laminated isolation bearing based on magnetorheological elastomer. Mechanical Systems and Signal Processing, 159, 107843.