Parameter study and optimization on filtration and resistance characteristics of granular bed filter

Advanced Powder Technology - Tập 29 - Trang 3250-3256 - 2018
Yinsheng Yu1, Yubing Tao1, Fei-long Wang1, Ya-Ling He1
1Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China

Tài liệu tham khảo

Stijepovic, 2011, Optimal waste heat recovery and reuse in industrial zones, Energy, 36, 4019 Hurley, 2003, Factors affecting the tensile strength of hot-gas filter dust cakes, Adv. Powder Technol., 14, 695, 10.1163/15685520360731981 Sujaridworakun, 2014, Influence of pH and HPC concentration on the synthesis of zinc oxide photocatalyst particle from zinc-dust waste by hydrothermal treatment, Adv. Powder Technol., 25, 1266, 10.1016/j.apt.2014.03.002 Liu, 2017, Experiment on fine particle purification by flue gas condensation for industrial boilers, Fuel, 199, 684, 10.1016/j.fuel.2017.03.028 Darcovich, 1997, Developments in the control of fine particulate air emissions, Adv. Powder Technol., 8, 179, 10.1016/S0921-8831(08)60463-X Wang, 2017, Real-time fouling characteristics of a typical heat exchanger used in the waste heat recovery systems, Int. J. Heat Mass Transf., 104, 774, 10.1016/j.ijheatmasstransfer.2016.08.112 Shi, 2016, An experimental study of ash accumulation in flue gas, Adv. Powder Technol., 27, 1473, 10.1016/j.apt.2016.05.007 Yoshida, 2003, Effect of apex cone height on particle classification performance of a cyclone separator, Adv. Powder Technol., 14, 263, 10.1163/15685520360685938 Balasubramanian, 2007, Drying of granular materials in circulating fluidized beds, Adv. Powder Technol., 18, 135, 10.1163/156855207780208600 Tang, 2018, Parametric study on fouling mechanism and heat transfer characteristics of tube bundle heat exchangers for reducing fouling considering the deposition and removal mechanisms, Fuel, 211, 301, 10.1016/j.fuel.2017.09.015 Chou, 2005, Flow patterns and wall stresses in a moving granular filter bed with a curved symmetric louvered wall, Adv. Powder Technol., 16, 451, 10.1163/1568552054969889 Hu, 2016, Experimental study on catalytic cracking of model tar compounds in a dual layer granular bed filter, Appl. Energy, 170, 47, 10.1016/j.apenergy.2016.02.080 Charinpanitkul, 2011, Deterministic model of open-space dust removal system using water spray nozzle: effects of polydispersity of water droplet and dust particle, Sep. Purif. Technol., 77, 382, 10.1016/j.seppur.2011.01.009 Zhao, 2015, Carbon dioxide fixation and biomass production from combustion flue gas using energy microalgae, Energy, 89, 347, 10.1016/j.energy.2015.05.123 Chen, 2016, Removal of dust particles from fuel gas using a moving granular bed filter, Fuel, 182, 174, 10.1016/j.fuel.2016.05.106 Chen, 2017, Experimental evaluations of solid-fueled pressurized chemical looping combustion – the effects of pressure, solid fuel and iron-based oxygen carriers, Appl. Energy, 195, 1012, 10.1016/j.apenergy.2017.03.085 Smid, 2005, Granular moving bed filters and adsorbers (GM-BF/A) — patent review: 1970–2000, Adv. Powder Technol., 16, 301, 10.1163/1568552054194230 Smid, 2006, Hot gas cleanup: pilot testing of moving bed filters, Filtr. Sep., 43, 21, 10.1016/S0015-1882(06)70864-3 Sharma, 2008, A critical review of syngas cleaning technologies-fundamental limitations and practical problems, Powder Technol., 180, 115, 10.1016/j.powtec.2007.03.023 Xiao, 2013, Granular bed filter: a promising technology for hot gas clean-up, Powder Technol., 244, 93, 10.1016/j.powtec.2013.04.003 Zhang, 2017, Studies of granular bed filter for dust removal in the process of coal pyrolysis by solid heat carrier, RSC Adv., 7, 20266, 10.1039/C7RA01467H Chen, 2017, Influence of operational parameters on the performance of gas clean-up technology with a moving granular bed filter, Energy, 120, 441, 10.1016/j.energy.2016.11.093 Chen, 2015, Hot gas clean-up technology of dust particulates with a moving granular bed filter, Appl. Therm. Eng., 74, 146, 10.1016/j.applthermaleng.2014.03.015 Chen, 2012, Filtration of dust particulates using a new filter system with louvers and sublouvers, Fuel, 99, 118, 10.1016/j.fuel.2012.04.021 Lei, 2016, Numerical study on the penetration of ash particles in a three-dimensional randomly packed granular filter, Fuel, 163, 122, 10.1016/j.fuel.2015.09.056 Menegolla, 2014, Filtration of dust in an intermittent moving granular bed filter: Performance and modeling, Sep. Purif. Technol., 133, 108, 10.1016/j.seppur.2014.06.051 Hsu, 2010, Investigation of the gas inlet velocity distribution in a fixed granular bed filter, Adv. Powder Technol., 21, 614, 10.1016/j.apt.2010.04.001 Yang, 2012, An experimental study of the influence of temperature on char separation in a moving granular bed, Powder Technol., 228, 121, 10.1016/j.powtec.2012.05.006 Bai, 2006, Dust collection efficiency analysis in a two-dimensional circulating granular bed filter, J. Air Waste Manage. Assoc., 56, 684, 10.1080/10473289.2006.10464466 Brown, 2003, Similitude study of a moving bed granular filter, Powder Technol., 138, 201, 10.1016/j.powtec.2003.09.002 Blasewitz, 1955, Filtration of radioactive aerosols by glass fibers, Air Rep., 4, 223, 10.1080/00966665.1955.10467674 Tsubaki, 1988, Gas filtration in granular moving beds—an experimental study, the, Can. J. Chem. Eng., 66, 271, 10.1002/cjce.5450660212 Peukert, 1991, Influence of temperature on particle separation in granular bed filters, Powder Technol., 68, 263, 10.1016/0032-5910(91)80051-J Kalinowski, 1983, Aerosol filtration by a cocurrent moving granular bed: penetration theory, Environ. Sci. Technol., 17, 20, 10.1021/es00107a007