Parameter identification of vector-controlled induction machines
Tóm tắt
This paper describes the identification of electromagnetic time constants and stator resistance for field oriented induction motor drives. The model of an induction motor at standstill in terms of state representation is discussed. A direct continuous-time identification from the standstill time-domain test data is based on the parametrized observer state vector. In a laboratory configuration the stator resistance is influenced by the non-linear inverter gain function. Two categories of current responses to voltage steps and to pseudo random binary sequences are examined. The current transients indicate saturation effects. Parameter estimates of a linear machine model are determined using least squares algorithms. Simulation and experimental studies are carried out in a Matlab software environment. Corresponding results obtained for two induction motor drives of different power ratings are included.
Tài liệu tham khảo
Heinemann, G.; Leonhard, W.: Self-tuning field orientated control of an induction motor drive. Proc. IPEC'90 Tokyo (1990) 465–472
Joetten, R.; Schierling, H.: Adaptive and self-commissioning control for a drive with induction motor and voltage source inverter. Proc. EPE'87 Grenoble (1987) 883–889
Goldemberg, C.; Lobosco, O. S.: Numerical fitting method for obtaining induction motor characteristics from manufacturer data sheets. Proc. ICEM'92 Manchester (1992) 552–556
Wang, C.;Novotny, D. W.;Lipo, T. A.: An automated rotor time constant measurements system for indirect field-oriented drives. IEEE Trans. Ind. Appl. 24 (1988) 151–159
Khambadkone, A. M.;Holtz, J.: Vector controlled induction motor drive with a self-commissioning scheme. IEEE Trans. Ind. Electronics 38 (1991) 322–327
Moon, S-I;Keyhani, A.: Estimation of induction machine parameters from standstill time-domain data. IEEE Trans. Ind. Applications 30 (1994) 1609–1615
Chrzan, P. J.: A rotor time constant identification for vector-controlled current inverter-fed induction motor. Z. N. Politech. Gdańsk, Elektryka 67 (1991) 75–85
Chrzan, P. J.: Identification methods for vector-controlled induction motor drives — A survey (Part 1). Institut fur Ragelungstechnik, TU Braunschweig, Int. Report 1993
Leonhard, W.: Control of electrical drives. Berlin Heidelberg New York Tokyo: Springer 1985
Kreisselmeier, G.: Adaptive observers with exponential rate of convergence. IEEE Trans. Automatic Control 22 (1977) 2–8