Parallelization of lattice modelling for estimation of fracture process zone extent in cementitious composites

ASTM E647-00. Standard test method for measurement of fatigue crack growth rates. ASTM International; 2000.

Bažant, 1996, Analysis of work-of-fracture method for measuring fracture energy of concrete, ASCE J Eng Mech, 122, 138, 10.1061/(ASCE)0733-9399(1996)122:2(138)

Bažant, 1990, Determination of fracture energy, process zone length and brittleness number from size effect, with application to rock and concrete, Int J Fract, 44, 111, 10.1007/BF00047063

Bolander, 1999, Stress analysis using elastically uniform rigid-body-spring networks, J Struct Mech Earthq Eng, 633, 125

Červenka V et al. ATENA program documentation, theory and user manual. Cervenka Consulting, Prague; 2005.

Duan, 2003, Boundary effect on concrete fracture and non-constant fracture energy distribution, Eng Fract Mech, 70, 2257, 10.1016/S0013-7944(02)00223-0

Duan, 2007, Size effect on specific fracture energy of concrete, Eng Fract Mech, 74, 87, 10.1016/j.engfracmech.2006.01.031

Eliáš J. Discrete simulation of fracture processes of disordered materials, PhD thesis. Brno University of Technology, Brno, Czech Republic; 2009.

Eliáš J. Elastic behavior of a 2D homogeneous rigid-body-spring network, private study, private communication.

Frantík P. FyDiK application; 2007–2011. <http://www.kitnarf.cz/fydik>.

Frantík, 2009, Fractality of simulated fracture, Key Eng Mater, 409, 154, 10.4028/www.scientific.net/KEM.409.154

Frantík, 2011, Efficient lattice modelling of fracture process zone extent in cementitious composites

Hillerborg, 1976, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cem Concr Res, 6, 773, 10.1016/0008-8846(76)90007-7

Hu, 2004, Influence of fracture process zone height on fracture energy of concrete, Cem Concr Res, 34, 1321, 10.1016/j.cemconres.2003.12.027

Hu, 2007, Size effect: influence of proximity of fracture process zone to specimen boundary, Eng Fract Mech, 74, 1093, 10.1016/j.engfracmech.2006.12.009

Jirásek M, Zeman J. Deformation and failure of materials – viscoelasticity, plasticity, fracture and damage. Czech Technical University in Prague, Prague; 2008 [in Czech].

Karihaloo, 1995

Karihaloo, 2004, A method for constructing a bilinear tension softening diagram of concrete corresponding to its true fracture energy, Mag Concr Res, 56, 597, 10.1680/macr.2004.56.10.597

Karihaloo, 2003, A simple method for determining the true specific fracture energy of concrete, Mag Concr Res, 55, 471, 10.1680/macr.2003.55.5.471

Karihaloo, 2003, Coefficients of the crack tip asymptotic field for wedge splitting specimens, Eng Fract Mech, 70, 2407, 10.1016/S0013-7944(03)00005-5

Karihaloo, 2001, Higher order terms of the crack tip asymptotic field for a notched three-point bend beam, Int J Fract, 112, 111, 10.1023/A:1013392324585

Karihaloo, 2001, Higher order terms of the crack tip asymptotic field for a wedge-splitting specimen, Int J Fract, 112, 129, 10.1023/A:1013366025494

Knésl, 1998

Landis, 1999, Micro–macro fracture relationship and acoustic emission in concrete, Constr Build Mater, 13, 65, 10.1016/S0950-0618(99)00009-4

Luong, 1990, Infrared thermovision of damage processes in concrete and rock, Eng Fract Mech, 35, 291, 10.1016/0013-7944(90)90207-W

Maji, 1998, Process zone and acoustic-emission measurements in concrete, Exp Mech, 27

Mihashi, 1996, Correlation between characteristics of fracture process zone and tension-softening properties of concrete, Nucl Eng Des, 165, 359, 10.1016/0029-5493(96)01205-8

Mindess, 1991, Fracture process zone detection, 231

Muralidhara, 2010, Fracture process zone size and true fracture energy of concrete using acoustic emission, Constr Build Mater, 24, 479, 10.1016/j.conbuildmat.2009.10.014

Nallathambi, 1986, Determination of specimen-size independent fracture toughness of plain concrete, Mag Concr Res, 38, 67, 10.1680/macr.1986.38.135.67

Otsuka, 2000, Fracture process zone in concrete tension specimen, Eng Fract Mech, 65, 111, 10.1016/S0013-7944(99)00111-3

Ouyang, 1991, Damage assessment in concrete using quantitative acoustic emission, ASCE J Eng Mech, 117, 2681, 10.1061/(ASCE)0733-9399(1991)117:11(2681)

RILEM Committee FMT 50. Determination of the fracture energy of mortar and concrete by means of three-point bend test on notched beams. Mater Struct 1985;18:285–290.

Řoutil L, Veselý V, Keršner Z, Seitl S, Knésl Z. Fracture process zone size and energy dissipated during crack propagation in quasi-brittle materials. In: Pokluda et al., editors. Proc. of 17th European congress on fracture – ECF 2008. Vutium, Brno; 2008. 97 + CD 8 p. [book of abstracts + CD-ROM].

Sakata, 1995, Crack evaluation in concrete members based on ultrasonic spectroscopy, Am Concr Inst Mater J, 71, 686

Seitl, 2011, Two-parameter fracture mechanical analysis of a near-crack-tip stress field in wedge splitting test specimens, Comput Struct, 89, 1852, 10.1016/j.compstruc.2011.05.020

Shah, 1995

Shah, 1990, Experimental methods for determining fracture process zone and fracture parameters, Eng Fract Mech, 35, 3, 10.1016/0013-7944(90)90178-J

Trunk, 2001, Influence of size on fracture energy of concrete, Mater Struct, 34, 260, 10.1007/BF02482204

van Mier, 1997

Vidya Sagar, 2009, An experimental study on fracture process zone in HSC three point bend beam specimen using acoustic emission method, J Struct Eng, 36

Vidya Sagar, 2010, Verification of the applicability of lattice model to concrete fracture by AE study, Int J Fract, 161, 121, 10.1007/s10704-009-9431-7

Veselý V, Frantík P. ReFraPro – reconstruction of fracture process, Java application; 2008–2011.

Veselý, 2010, Reconstruction of a fracture process zone during tensile failure of quasi-brittle materials, Appl Comput Mech, 4, 237

Veselý, 2009, Cracked volume specified work of fracture

Veselý, 2010, Estimation of fracture process zone extent in cementitious composites, Chem Listy, 104, 382

Veselý, 2007, Structural geometry, fracture process zone and fracture energy, vol. 1, 111

Veselý, 2012, Influence of boundary conditions on higher order terms of near-crack-tip stress field in a WST specimen, Key Eng Mater, 488–489, 399

Wikipedia, the free encyclopedia – stress (mechanics), yield surface. <http://en.wikipedia.org>.

Williams, 1957, On the stress distribution at the base of stationary crack, ASME J Appl Mech, 24, 109, 10.1115/1.4011454