PEPT validated CFD-DEM model of aspherical particle motion in a spouted bed

Windows-Yule, 2016, Numerical modelling of granular flows: a reality check, Computational particle mechanics, 3, 311, 10.1007/s40571-015-0083-2 Mathur, 1955, A technique for contacting gases with coarse solid particles, AIChE J., 1, 157, 10.1002/aic.690010205 Viswanathan, 1986, Spouted bed drying of agricultural grains, The, Can. J. Chem. Eng., 64, 223, 10.1002/cjce.5450640209 de Freitas, 2019, Pharmaceutical applications of spouted beds: A review on solid dosage forms, Particuology, 42, 126, 10.1016/j.partic.2018.05.002 Silva, 1998, Production of Amylases from Rice by Solid-State Fermentation in a Gas− Solid Spouted-Bed Bioreactor, Biotechnol. Prog., 14, 580, 10.1021/bp9800440 van Buijtenen, 2009, A discrete element study of wet particle–particle interaction during granulation in a spout fluidized bed, The Canadian Journal of Chemical Engineering, 87, 308, 10.1002/cjce.20144 Sutkar, 2016, CFD–DEM model for coupled heat and mass transfer in a spout fluidized bed with liquid injection, Chem. Eng. J., 288, 185, 10.1016/j.cej.2015.11.044 Link, 2005, Flow regimes in a spout–fluid bed: A combined experimental and simulation study, Chem. Eng. Sci., 60, 3425, 10.1016/j.ces.2005.01.027 Zhou, 2010, Discrete particle simulation of particle–fluid flow: model formulations and their applicability, J. Fluid Mech., 661, 482, 10.1017/S002211201000306X D. Gidaspow, Multiphase flow and fluidization: continuum and kinetic theory descriptions, Academic press1994. Tenneti, 2011, Drag law for monodisperse gas–solid systems using particle-resolved direct numerical simulation of flow past fixed assemblies of spheres, Int. J. Multiph. Flow, 37, 1072, 10.1016/j.ijmultiphaseflow.2011.05.010 Zhou, 2011, Discrete particle simulation of gas fluidization of ellipsoidal particles, Chem. Eng. Sci., 66, 6128, 10.1016/j.ces.2011.08.041 Mahajan, 2018, Nonspherical particles in a pseudo-2D fluidized bed: Experimental study, AIChE J., 64, 1573, 10.1002/aic.16078 Zhong, 2016, DEM/CFD-DEM modelling of non-spherical particulate systems: theoretical developments and applications, Powder Technol., 302, 108, 10.1016/j.powtec.2016.07.010 Lu, 2015, Discrete element models for non-spherical particle systems: From theoretical developments to applications, Chem. Eng. Sci., 127, 425, 10.1016/j.ces.2014.11.050 Williams, 1992, Superquadrics and modal dynamics for discrete elements in interactive design, Engineering Computations, 10.1108/eb023852 Cleary, 2004, Large scale industrial DEM modelling, Engineering Computations, 10.1108/02644400410519730 Kruggel-Emden, 2008, A study on the validity of the multi-sphere Discrete Element Method, Powder Technol., 188, 153, 10.1016/j.powtec.2008.04.037 Nassauer, 2013, Polyhedral particles for the discrete element method, Granular Matter, 15, 85, 10.1007/s10035-012-0381-9 Govender, 2014, Development of a convex polyhedral discrete element simulation framework for NVIDIA Kepler based GPUs, J. Comput. Appl. Math., 270, 386, 10.1016/j.cam.2013.12.032 Becker, 2021, Modeling the Influence of Particle Shape on Mechanical Compression and Effective Transport Properties in Granular Lithium-Ion Battery Electrodes, Energy Technology, 9, 2000886, 10.1002/ente.202000886 Zeng, 2018, Investigation of erosion behaviors of sulfur-particle-laden gas flow in an elbow via a CFD-DEM coupling method, Powder Technol., 329, 115, 10.1016/j.powtec.2018.01.056 Akhshik, 2015, CFD–DEM model for simulation of non-spherical particles in hole cleaning process, Part. Sci. Technol., 33, 472, 10.1080/02726351.2015.1010760 Liu, 2021, CFD-DEM Simulation of Fluidization of Polyhedral Particles in a Fluidized Bed, Energies, 14, 4939, 10.3390/en14164939 Zhou, 2017, DEM investigation on characteristics of rolling resistance for modelling particle shape, EPJ Web of Conferences, EDP Sciences, 05005 Estrada, 2011, Identification of rolling resistance as a shape parameter in sheared granular media, Phys. Rev. E, 84, 10.1103/PhysRevE.84.011306 Wensrich, 2012, Rolling friction as a technique for modelling particle shape in DEM, Powder Technol., 217, 409, 10.1016/j.powtec.2011.10.057 Zhou, 1999, Rolling friction in the dynamic simulation of sandpile formation, Physica A, 269, 536, 10.1016/S0378-4371(99)00183-1 Hlosta, 2020, DEM Investigation of the Influence of Particulate Properties and Operating Conditions on the Mixing Process in Rotary Drums: Part 1—Determination of the DEM Parameters and Calibration Process, Processes, 8, 222, 10.3390/pr8020222 Dellino, 2005, The analysis of the influence of pumice shape on its terminal velocity, Geophys. Res. Lett., 32, 10.1029/2005GL023954 Loth, 2008, Drag of non-spherical solid particles of regular and irregular shape, Powder Technol., 182, 342, 10.1016/j.powtec.2007.06.001 Di Felice, 1994, The voidage function for fluid-particle interaction systems, Int. J. Multiph. Flow, 20, 153, 10.1016/0301-9322(94)90011-6 Rong, 2013, Lattice-Boltzmann simulation of fluid flow through packed beds of uniform spheres: Effect of porosity, Chem. Eng. Sci., 99, 44, 10.1016/j.ces.2013.05.036 Hilton, 2010, Dynamics of gas–solid fluidised beds with non-spherical particle geometry, Chem. Eng. Sci., 65, 1584, 10.1016/j.ces.2009.10.028 Breuninger, 2018, CFD–DEM simulation of fine particles in a spouted bed apparatus with a Wurster tube, Particuology, 42, 114, 10.1016/j.partic.2018.03.015 Che, 2020, CFD-DEM study of gas-solid flow regimes in a Wurster type fluidized bed with experimental validation by electrical capacitance tomography, Chem. Eng. J., 389, 10.1016/j.cej.2020.124280 Müller, 2009, Validation of a discrete element model using magnetic resonance measurements, Particuology, 7, 297, 10.1016/j.partic.2009.04.002 Windows-Yule, 2021, Recent Advances in Positron Emission Particle Tracking: A Comparative Review, Rep. Prog. Phys. Al-Shemmeri, 2021, Coffee bean particle motion in a spouted bed measured using Positron Emission Particle Tracking (PEPT), J. Food Eng., 110709 Parker, 2017, Positron emission particle tracking and its application to granular media, Rev. Sci. Instrum., 88, 10.1063/1.4983046 Wildman, 2000, Single-particle motion in three-dimensional vibrofluidized granular beds, Phys. Rev. E, 62, 3826, 10.1103/PhysRevE.62.3826 C. Windows-Yule, A. Neveu, Calibration of DEM simulations for dynamic particulate systems, Papers in Physics 14 (2022) 140010-140010. Fayed, 2013 Goniva, 2012, Influence of rolling friction on single spout fluidized bed simulation, Particuology, 10, 582, 10.1016/j.partic.2012.05.002 Windows-Yule, 2020, Positron emission particle tracking of granular flows, Annual review of chemical and biomolecular engineering, 11, 367, 10.1146/annurev-chembioeng-011620-120633 Parker, 2002, Positron emission particle tracking using the new Birmingham positron camera, Nucl. Instrum. Methods Phys. Res., Sect. A, 477, 540, 10.1016/S0168-9002(01)01919-2 Kloss, 2012, Models, algorithms and validation for opensource DEM and CFD-DEM, Prog. Comput. Fluid Dyn., Int. J., 12, 140, 10.1504/PCFD.2012.047457 Gryczka, 2009, Characterization and CFD-modeling of the hydrodynamics of a prismatic spouted bed apparatus, Chem. Eng. Sci., 64, 3352, 10.1016/j.ces.2009.04.020 S. Heinrich, M. Dosta, S. Antonyuk, Multiscale Analysis of a Coating Process in a Wurster Fluidized Bed Apparatus, Advances in Chemical Engineering, Academic Press2015, pp. 83-135. https://doi.org/http://dx.doi.org/10.1016/bs.ache.2015.10.012. Tsuji, 1992, Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe, Powder Technol., 71, 239, 10.1016/0032-5910(92)88030-L Ai, 2011, Assessment of rolling resistance models in discrete element simulations, Powder Technol., 206, 269, 10.1016/j.powtec.2010.09.030 Zastawny, 2012, Derivation of drag and lift force and torque coefficients for non-spherical particles in flows, Int. J. Multiph. Flow, 39, 227, 10.1016/j.ijmultiphaseflow.2011.09.004 Dioguardi, 2018, A new one-equation model of fluid drag for irregularly shaped particles valid over a wide range of Reynolds number, J. Geophys. Res. Solid Earth, 123, 144, 10.1002/2017JB014926 Mandø, 2010, On the motion of non-spherical particles at high Reynolds number, Powder Technol., 202, 1, 10.1016/j.powtec.2010.05.001 Hilton, 2012, Raceway formation in laterally gas-driven particle beds, Chem. Eng. Sci., 80, 306, 10.1016/j.ces.2012.06.044 Gan, 2017, Micromechanical analysis of flow behaviour of fine ellipsoids in gas fluidization, Chem. Eng. Sci., 163, 11, 10.1016/j.ces.2017.01.020 Hölzer, 2008, New simple correlation formula for the drag coefficient of non-spherical particles, Powder Technol., 184, 361, 10.1016/j.powtec.2007.08.021 Mema, 2021, Fluidization of elongated particles—Effect of multi-particle correlations for drag, lift, and torque in CFD-DEM, AIChE J., 67, e17157, 10.1002/aic.17157 Ma, 2019, CFD-DEM modeling of rod-like particles in a fluidized bed with complex geometry, Powder Technol., 344, 673, 10.1016/j.powtec.2018.12.066 Ergun, 1952, Fluid Flow Through Packed Columns, Fluid Flow Through Packed Columns, 89 Wen, 1966, Mechanics of Fluidization, Chem.engng Prog.symp.ser, 62, 100 McAllister, 1958, Perforated-plate performance, Chem. Eng. Sci., 9, 25, 10.1016/0009-2509(58)87004-9 Otsu, 1979, A threshold selection method from gray-level histograms, IEEE transactions on systems, man, and cybernetics, 9, 62, 10.1109/TSMC.1979.4310076 Wang, 2021, Influencing factors analysis and simulation calibration of restitution coefficient of rice grain, Applied Sciences, 11, 5884, 10.3390/app11135884 Hlosta, 2019, CFD-DEM numerical model of laboratory scale fluidized bed coffee roaster, AIP Conference Proceedings, AIP Publishing LLC, 10.1063/1.5114326 Azmir, 2019, CFD-DEM simulation of drying of food grains with particle shrinkage, Powder Technol., 343, 792, 10.1016/j.powtec.2018.11.097 Hu, 2019, The effects of collisional parameters on the hydrodynamics and heat transfer in spouted bed: A CFD-DEM study, Powder Technol., 353, 132, 10.1016/j.powtec.2019.05.020 Windows-Yule, 2022, Comparison with other techniques