PEEK: An excellent precursor for activated carbon production for high temperature application

Ania, 2002, Influence of oxygen-containing functional groups on active carbon adsorption on select organic compounds, Fuel Processing Technology, 79, 265, 10.1016/S0378-3820(02)00184-4 Metts, 2006, Effect of VOC loading on the ozone removal efficiency of activated carbon filters, Chemosphere, 62, 34, 10.1016/j.chemosphere.2005.04.049 Sircar, 1996, Activated carbon for gas separation and storage, Carbon, 34, 1, 10.1016/0008-6223(95)00128-X Carrott, 2006, Carbons molecular sieves from PET for separations involving CH4, CO2, O2 and N2, Applications of Surface Science, 252, 5948, 10.1016/j.apsusc.2005.11.014 Valente Nabais, 2006, New acrylic monolithic carbon molecular sieves for O2/N2 and CO2/CH4 separations, Carbon, 44, 1158, 10.1016/j.carbon.2005.11.005 Zondlo, 2007, Development of surface area and pore structure for activation of anthracite coal, Fuel Processing Technology, 89, 369, 10.1016/j.fuproc.2006.10.014 Lu, 2007, Simultaneous removal of VOC and NO by activated carbon impregnated with transition metal catalysts in combustion flue gas, Fuel Processing Technology, 88, 557, 10.1016/j.fuproc.2007.01.004 Tseng, 2003, Catalytic removal of SO2, NO and HCl from incineration flue gas over activated carbon-supported metal oxides, Carbon, 41, 1079, 10.1016/S0008-6223(03)00017-4 Raymundo-Pinero, 2000, Factors controlling the SO2 removal by porous carbons: relevance of the SO2 oxidation step, Carbon, 38, 335, 10.1016/S0008-6223(99)00109-8 Lyubchik, 2006, Catalytic supports on the base of activated anthracites and synthetic carbons, Applications of Surface Science, 252, 6084, 10.1016/j.apsusc.2005.11.027 Lillo-Ródenas, 2002, Usefulness of chemically activated anthracite for the abatement of VOC at low concentrations, Fuel Processing Technology, 77–78, 331, 10.1016/S0378-3820(02)00073-5 Bagreev, 2001, Thermal regeneration of a spent activated carbon previously used as hydrogen sulfide adsorbent, Carbon, 39, 1319, 10.1016/S0008-6223(00)00266-9 Ania, 2004, Microwave-induced regeneration of activated carbons polluted with phenol. A comparison with conventional thermal regeneration, Carbon, 42, 1383, 10.1016/j.carbon.2004.01.010 Durán-Valle, 2005, Study of cherry stones as raw material in preparation of carbonaceous adsorbents, Journal of Analytical and Applied Pyrolysis, 73, 59, 10.1016/j.jaap.2004.10.004 Stavropoulos, 2005, Precursor materials suitability for super activated carbons production, Fuel Processing Technology, 86, 1165, 10.1016/j.fuproc.2004.11.011 Cansado, 2007, High micropore activated carbon prepared from polyetheretherketone, Carbon, 45, 2445, 10.1016/j.carbon.2007.07.004 Van der Vegt, 2006, 255 Goyal, 2005, Preparation of high performance composites based on aluminum nitride/poly(ether–ether–ketone) and their properties, European Polymer Journal, 41, 2034, 10.1016/j.eurpolymj.2005.04.009 Carrott, 1987, Standard nitrogen adsorption data for non-porous carbons, Carbon, 25, 769, 10.1016/0008-6223(87)90148-5 Noh, 1989, Journal Colloid Interface Science, 130, 157, 10.1016/0021-9797(89)90086-6 Perng, 1999, Mechanism and kinetic modelling of PEEK pyrolysis by TG/MS, Polymer, 40, 7321, 10.1016/S0032-3861(99)00006-3 Nandan, 2003, Poly(ether ether ketone)/poly(aryl ether sulphone) blends: thermal degradation behaviour, European Polymer Journal, 39, 193, 10.1016/S0014-3057(02)00170-2 Hay, 1987, Thermal decomposition of poly(aryl ether ketones), Polymer, 28, 2047, 10.1016/0032-3861(87)90039-5 Valente Nabais, 2004, Preparation and modification of activated carbon fibres by microwave heating, Carbon, 42, 1315, 10.1016/j.carbon.2004.01.033 Cole, 1993, Fourier transform infrared spectroscopic study of thermal degradation in PEEK composites, Polymer, 34, 740, 10.1016/0032-3861(93)90357-G Naffakh, 1999, Thermal decomposition of technological polymer blends, Polymer Degradation and Stability, 66, 405, 10.1016/S0141-3910(99)00093-2 Carrott, 2006, Controlling the micropore size of activated carbons for the treatment of fuels and combustion gases, Applications of Surface Science, 252, 5953, 10.1016/j.apsusc.2005.11.016 Fávaro, 2007, Surface modification of HDPE, PP, and PET films with KMnO4/HCl solutions, Polymer Degradation and Stability, 92, 1219, 10.1016/j.polymdegradstab.2007.04.005 Cansado, 2006, Influence of degassing temperature on the performance of carbon molecular sieves for separations involving O2, N2, CO2, and CH4, Energy & Fuels, 20, 766, 10.1021/ef050374j Cansado, 2008, Textural development of activated carbon prepared from recycled PET with different chemical activation agents, Materials Science Forum, 587–588, 753, 10.4028/www.scientific.net/MSF.587-588.753