Overview on the hydrodynamic conditions found in industrial systems and its impact in (bio)fouling formation

Coletti, 2015, Basic science of the fouling process, 23 Majdi, 2019, Oil fouling in double-pipe heat exchanger under liquid-liquid dispersion and the influence of copper oxide nanofluid, Heat Transfer - Asian Res., 48, 1963, 10.1002/htj.21473 Arsenyeva, 2013, Accounting for the thermal resistance of cooling water fouling in plate heat exchangers, Appl. Therm. Eng., 61, 53, 10.1016/j.applthermaleng.2013.02.045 Petit, 2013, β-lactoglobulin denaturation, aggregation, and fouling in a plate heat exchanger: Pilot-scale experiments and dimensional analysis, Chem. Eng. Sci., 101, 432, 10.1016/j.ces.2013.06.045 Simões, 2005, Effect of mechanical stress on biofilms challenged by different chemicals, Water Res., 39, 5142, 10.1016/j.watres.2005.09.028 Zhang, 2020, Fouling characterization of camel milk with comparison to bovine milk, J. Food Eng., 285, 10.1016/j.jfoodeng.2020.110085 Bogacz, 2017, Impact of roughness, wettability and hydrodynamic conditions on the incrustation on stainless steel surfaces, Appl. Therm. Eng., 112, 352, 10.1016/j.applthermaleng.2016.10.076 Demirskiy, 2018, Prediction of fouling tendency in PHE by data of on-site monitoring. Case study at sugar factory, Appl. Therm. Eng., 128, 1074, 10.1016/j.applthermaleng.2017.09.087 Bozzoli, 2020, Cross-helix corrugation: The optimal geometry for effective food thermal processing, Int. J. Heat Mass Transf., 147, 10.1016/j.ijheatmasstransfer.2019.118874 Li, 2019, A review of factors affecting the efficiency of clean-in-place procedures in closed processing systems, Energy, 178, 57, 10.1016/j.energy.2019.04.123 Moreira, 2014, The combined effects of shear stress and mass transfer on the balance between biofilm and suspended cell dynamics, Desalination Water Treat, 53, 3348, 10.1080/19443994.2014.933625 Augusto, 2012, Using computational fluid dynamics (CFD) for evaluation of fluid flow through a gate valve, Int. J. Food Eng., 8, 21, 10.1515/1556-3758.2207 Chang, 2020, The impact of hydrodynamic shear force on adhesion morphology and biofilm conformation of Bacillus sp, Ocean Eng., 197, 10.1016/j.oceaneng.2019.106860 Hwang, 2014, Analysis of the mechanical stability and surface detachment of mature Streptococcus mutans biofilms by applying a range of external shear forces, Biofouling, 30, 1079, 10.1080/08927014.2014.969249 Cunault, 2019, Structure and resistance to mechanical stress and enzymatic cleaning of Pseudomonas fluorescens biofilms formed in fresh-cut ready to eat washing tanks, J. Food Eng., 262, 154, 10.1016/j.jfoodeng.2019.06.006 Faria, 2020, The relative importance of shear forces and surface hydrophobicity on biofilm formation by coccoid cyanobacteria, Polymers (Basel), 12, 653, 10.3390/polym12030653 Simões, 2007, The role of hydrodynamic stress on the phenotypic characteristics of single and binary biofilms of Pseudomonas fluorescens, Water Sci. Technol., 55, 437, 10.2166/wst.2007.288 Simões, 2007, The effect of hydrodynamic conditions on the phenotype of Pseudomonas fluorescens biofilms, Biofouling, 23, 249, 10.1080/08927010701368476 Simões, 2008, Physiology and behavior of Pseudomonas fluorescens single and dual strain biofilms under diverse hydrodynamics stresses, Int. J. Food Microbiol., 128, 309, 10.1016/j.ijfoodmicro.2008.09.003 Simões, 2008, Sodium dodecyl sulfate allows the persistence and recovery of biofilms of Pseudomonas fluorescens formed under different hydrodynamic conditions, Biofouling, 24, 35, 10.1080/08927010701730311 Simões, 2007, Influence of biofilm composition on the resistance to detachment, Water Sci. Technol., 55, 473, 10.2166/wst.2007.293 Simões, 2006, Control of flow-generated biofilms with surfactants, Food Bioprod. Proc., 84, 338, 10.1205/fbp06022 Simões, 2009, Species association increases biofilm resistance to chemical and mechanical treatments, Water Res., 43, 229, 10.1016/j.watres.2008.10.010 Simões, 2002, Monitoring the effects of biocide treatment of Pseudomonas fluorescens biofilms formed under different flow regimes, Water Sci. Technol., 47, 217, 10.2166/wst.2003.0325 Çengel, 2017 Gomes, 2014, An overview on the reactors to study drinking water biofilms, Water Res., 62, 63, 10.1016/j.watres.2014.05.039 Bridier, 2011, Resistance of bacterial biofilms to disinfectants: A review, Biofouling, 27, 1017, 10.1080/08927014.2011.626899 Møretrø, 2013, Bacteria on meat abattoir process surfaces after sanitation: Characterisation of survival properties of Listeria monocytogenes and the commensal bacterial flora, Adv. Microbiol., 03, 255, 10.4236/aim.2013.33037 Marouani-Gadri, 2009, Characterization of bacterial strains isolated from a beef-processing plant following cleaning and disinfection - Influence of isolated strains on biofilm formation by Sakai and EDL 933 E. coli O157:H7, Int. J. Food Microbiol., 133, 62, 10.1016/j.ijfoodmicro.2009.04.028 Goode, 2013, Fouling and cleaning studies in the food and beverage industry classified by cleaning type, Compr. Rev. Food Sci. Food Saf., 12, 121, 10.1111/1541-4337.12000 Bott, 2011 Polman, 2013, Impact of biofouling in intake pipes on the hydraulics and efficiency of pumping capacity, Desalination Water Treat., 51, 997, 10.1080/19443994.2012.707371 Fitzhenry, 2017, Legionnaires' Disease outbreaks and cooling Towers, New York City, New York, USA, Emerg. Infect Dis., 23, 1769, 10.3201/eid2311.161584 George, 2016, A large outbreak of Legionnaires’ disease in an industrial town in Portugal, Rev. Port. Sau Pub., 34, 199 Di Pippo, 2018, Biofilm growth and control in cooling water industrial systems, FEMS Microbiol. Ecol., 94, fiy044 Liu, 2011, Disinfection of bacterial biofilms in pilot-scale cooling tower systems, Biofouling, 27, 393, 10.1080/08927014.2011.577525 Galie, 2018, Biofilms in the food industry: health aspects and control methods, Front. Microbiol., 9, 898, 10.3389/fmicb.2018.00898 ECDC, Salmonellosis - Annual epidemiological report for 2017, Stockholm: European Centre for Disease Prevention and Control, 2020. ECDC, Listeriosis - Annual epidemiological report for 2017, Stockholm: European Centre for Disease Prevention and Control, 2020. Flemming, 2013, Mini-review: microbial problems in paper production, Biofouling, 29, 683, 10.1080/08927014.2013.798865 Zumsteg, 2017, Characterizing bacterial communities in paper production - troublemakers revealed, Microbiology, 6 Mattila, 2002, Structure and on-site formation of biofilms in paper machine water flow, J. Ind. Microbiol. Biotechnol., 28, 268, 10.1038/sj.jim.7000242 Bajpai, 2015 Simunic, 2020, The limitations of hydrodynamic removal of biofilms from the dead-ends in a model drinking water distribution system, Water Res., 178, 10.1016/j.watres.2020.115838 Cowle, 2019, Impact of flow hydrodynamics and pipe material properties on biofilm development within drinking water systems, Environ. Technol., 41, 3732, 10.1080/09593330.2019.1619844 Fish, 2017, Biofilm structures (EPS and bacterial communities) in drinking water distribution systems are conditioned by hydraulics and influence discolouration, Sci. Total Environ., 593–594, 571, 10.1016/j.scitotenv.2017.03.176 Simões, 2013, Biofilms in drinking water: problems and solutions, RSC Adv., 3, 2520, 10.1039/C2RA22243D Barrett, 2019, Impact of public health interventions on drinking water - associated outbreaks of hepatitis A - United States, 1971–2017, MMWR, 68, 766 Shin, 2017, A waterborne outbreak involving hepatitis A virus genotype IA at a residential facility in the Republic of Korea in 2015, J. Clin. Virol., 94, 63, 10.1016/j.jcv.2017.07.006 Nygård, 2006, A large community outbreak of waterborne giardiasis - delayed detection in a non-endemic urban area, BMC Public Health, 6, 141, 10.1186/1471-2458-6-141 Hörmann, 2011, Mixing and dissolution processes of pharmaceutical bulk materials in stirred tanks: Experimental and numerical investigations, Ind. Eng. Chem. Res., 50, 12011, 10.1021/ie2002523 A. Ibarz, P.E.D. Augusto, Principles of unit operations in food processing, in: A. de Sousa Sant'Ana (Ed.) Quantitative microbiology in food processing: Modeling the microbial ecology, John Wiley & Sons, Ltd. 2016, pp. 68-83. Ntamba, 2012, Pressure losses and limiting Reynolds numbers for non-Newtonian fluids in short square-edged orifice plates, J. Fluids Eng., 134, 10.1115/1.4007156 G. Kalayci, E.M. Ozbayoglu, S.Z. Miska, M. Yu, N. Takach, A. Saasen, R. May, Transition criteria for laminar to turbulent flow for Yield Power Law (YPL) fluids based on stability analysis, ASME 2013 Fluids Engineering Division Summer Metting Nevada, USA (2013), 16188. Kfuri, 2017, Friction coefficients for Bingham and power-law fluids in abrupt contractions and expansions, J. Fluids Eng., 139, 10.1115/1.4034521 Moreau, 2015, Pressure drop and axial dispersion in industrial millistructured heat exchange reactors, Chem. Eng. Process - Process Intensification, 95, 54, 10.1016/j.cep.2015.05.009 A. Ghanem, T. Lemenand, D. Della Valle, H. Peerhossaini, Transport phenomena in passively manipulated chaotic flows: Split-and-recombine reactors, Proceedings of the ASME 2013 Fluids Engineering Division Summer Metting Nevada, USA (2013), 16077. Anitha, 2019, What dominates heat transfer performance of hybrid nanofluid in single pass shell and tube heat exchanger?, Adv. Powder Technol., 30, 3107, 10.1016/j.apt.2019.09.018 Wang, 2017, Configuration optimization of shell-and-tube heat exchangers with helical baffles using multi-objective genetic algorithm based on fluid-structure interaction, Int. Commun. Heat Mass Transfer, 85, 62, 10.1016/j.icheatmasstransfer.2017.04.016 Master, 2006, Most frequently used heat exchangers from pioneering research to worldwide applications, Heat Transf. Eng., 27, 4, 10.1080/01457630600671960 Singh, 2014, 265 Tamkhade, 2019, Thermal analysis and performance evaluation of triple concentric tube heat exchanger, Int. J. Eng. Adv. Technol., 8, 3898, 10.35940/ijeat.F7939.088619 Vieira, 1997, Preventing biofouling in heat exchangers: an experimental assessment of the effects of water velocity and inorganic particles on deposit detachment, 2087 Malekan, 2018, Investigation of convective heat transfer of ferrofluid using CFD simulation and adaptive neuro-fuzzy inference system optimized with particle swarm optimization algorithm, Powder Technol., 333, 364, 10.1016/j.powtec.2018.04.044 Costa, 2019, Influence of magnetic field on barium sulfate incrustation from aqueous solutions, Heliyon, 5, 10.1016/j.heliyon.2019.e02032 Alam, 2018, A comprehensive review on single phase heat transfer enhancement techniques in heat exchanger applications, Renew. Sustain. Energ. Rev., 81, 813, 10.1016/j.rser.2017.08.060 Kukulka, 2012, Development and evaluation of enhanced heat transfer tubes for transitional Reynolds number flow, Chem. Eng. Trans., 29, 1489 Kukulka, 2013, Enhanced heat transfer surface development for exterior tube surfaces, AIDIC Conf. Ser., 11, 191 Wang, 2015, Numerical and experimental analysis of heat transfer in turbulent flow channels with two-dimensional ribs, Appl. Therm. Eng., 75, 623, 10.1016/j.applthermaleng.2014.10.039 Mohebbi, 2018, Effect of MWCNT-Fe3O4/water hybrid nanofluid on the thermal performance of ribbed channel with apart sections of heating and cooling, J. Therm. Anal. Calorim., 135, 3029, 10.1007/s10973-018-7483-5 Ajeel, 2017, A CFD study on turbulent forced convection flow of Al2O3-water nanofluid in semi-circular corrugated channel, IOP Conf. Series: Mater. Sci. Eng., 243 Mohebbi, 2020, An experimental investigation on the heat transfer and friction coefficients of a small plate heat exchanger with chevron angle, Heat Mass Transf., 56, 849, 10.1007/s00231-019-02749-0 Adegun, 2018, Numerical simulation of forced convective heat transfer in inclined elliptic ducts with multiple internal longitudinal fins, Alex Eng. J., 57, 2485, 10.1016/j.aej.2017.01.014 Wang, 2010, Second-law thermodynamic comparison and maximal velocity ratio design of shell-and-tube heat exchangers with continuous helical baffles, J. Heat Transfer, 132, 10.1115/1.4001755 A.A.H. Mostafa, E.E. Khalil, G. El-Hariry, E.M. Saad, W.A.A. Maksoud, On the modelling of shell and tube heat exchanger characteristics, 2018 Joint Thermophysics and Heat Transfer Conference, American Institute of Aeronautics and Astronautics, Atlanta, Georgia (2018), 3906. Ghitheeth, 2020, Experimental study of heat transfer enhancement by inserting metal chain in heat exchanger tube, IOP Conf. Series: Mater. Sci. Eng., 671 Meganathan, 2015, Experimental investigation of heat transfer using “Twisted aluminium tape”, Int. J. Eng. Res. Appl., 5, 1 Tian, 2019, Turbulent flows in a spiral double-pipe heat exchanger, Int. J. Numer. Method H, 30, 39, 10.1108/HFF-04-2019-0287 Pawar, 2013, Studies on convective heat transfer through helical coils, Heat Mass Transf., 49, 1741, 10.1007/s00231-013-1210-3 Zhou, 2013, Mass flow measurement of fluids by a helically coiled tube, Sens. Transducers, 152, 152 Abdollahi-M, 2018, Performance characteristics of low concentrations of CuO/water nanofluids flowing through horizontal tube for energy efficiency purposes; an experimental study and ANN modeling, J. Mol. Liq., 271, 342, 10.1016/j.molliq.2018.08.149 M. Raja, R. Vijayan, R. Vivekananthan, M.A. Vadivelu, Numerical investigation on heat transfer of Al2O3/water nanofluid in a shell and tube heat exchanger, AMM, Trans Tech Publications, Ltd., 2014, pp. 3-6. Yuan, 2018, Numerical research on convective heat transfer and resistance characteristics of turbulent duct flow containing nanorod-based nanofluids, J. Nanotechnol., 2018, 4349572, 10.1155/2018/4349572 Minea, 2013, Influence of microtube heating geometry on behavior of an alumina nanofluid at low Reynolds numbers, Appl. Mech. Mater., 371, 596, 10.4028/www.scientific.net/AMM.371.596 Li, 2016, Effects of non-Newtonian behaviour on the thermal performance of nanofluids in a horizontal channel with discrete regions of heating and cooling, Appl. Therm. Eng., 94, 404, 10.1016/j.applthermaleng.2015.10.148 Hussein, 2017, Heat transfer enhancement using hybrid nanoparticles in ethylene glycol through a horizontal heated tube, Int. J. Automot. Mech. Eng., 14, 4183, 10.15282/ijame.14.2.2017.6.0335 Alvarez-Regueiro, 2019, Experimental convection heat transfer analysis of a nano-enhanced industrial coolant, Nanomaterials (Basel), 9, 267, 10.3390/nano9020267 Tang, 2013, Viscosity and friction factor of aluminum oxide-water nanofluid flow in circular tubes, J. Nanotechnol. Eng. Med., 4, 10.1115/1.4025540 N.G. Ivanov, A.I. Kirillov, E.M. Smirnov, V.V. Ris, Numerical modelling of buoyancy-induced fluid flow and heat transfer in a staggered tube bank, in Proceedings of the ASME 2010 14th International Heat Transfer Conference, Washington DC, USA, 2010, 22640. O. Manca, S. Nardini, D. Ricci, S. Tamburrino, Numerical analysis of nanofluid forced convection in ducts with triangular cross sections, in Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, Colorado, USA, 2011, 62700. Manca, 2015, A numerical analysis on nanofluid mixed convection in triangular cross-sectioned ducts heated by a uniform heat flux, Adv. Mech. Eng., 7, 1, 10.1155/2014/292973 Bozzoli, 2016, Experimental estimation of the local heat-transfer coefficient in coiled tubes in turbulent flow regime, J. Phys. Conf. Ser., 745, 10.1088/1742-6596/745/3/032034 Srivastava, 2017, Temporal linear stability analysis of an entry flow in a channel with viscous heating, Int. J. Heat Mass Transf., 109, 922, 10.1016/j.ijheatmasstransfer.2017.02.048 Alrashed, 2018, The numerical modeling of water/FMWCNT nanofluid flow and heat transfer in a backward-facing contracting channel, Phys. B Condens. Matter, 537, 176, 10.1016/j.physb.2018.02.022 M. Mehrabi, Application of FCM-ANFIS approach to model heat transfer and pressure drop of Titania-water nanofluids in the turbulent flow regime, 19th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, Toulouse, France, 2018, 1-5. Arvanitis, 2018, Laminar flow and heat transfer in U-bends: The effect of secondary flows in ducts with partial and full curvature, Int. J. Therm. Sci., 130, 70, 10.1016/j.ijthermalsci.2018.03.027 Mohammadpoor, 2019, Investigating heat transfer properties of copper nanofluid in ethylene glycol synthesized through single and two-step routes, Int. J. Refrig., 99, 243, 10.1016/j.ijrefrig.2019.01.012 Mohammed, 2019, CFD based investigations on the effects of blockage shapes on transient mixed convective nanofluid flow over a backward facing step, Powder Technol., 346, 441, 10.1016/j.powtec.2019.02.002 Rodriguez-Corredor, 2014, An experimental investigation of turbulent water flow in concentric annulus using particle image velocimetry technique, J. Fluids Eng., 136, 10.1115/1.4026136 Vallejo, 2020, Convective heat transfer in pipe flow for glycolated water-based carbon nanofluids. A thorough analysis, J. Mol. Liq., 301, 10.1016/j.molliq.2019.112370 Asteriadou, 2010, Modeling heat exchanger performance for non-Newtonian fluids, J. Food Process Eng., 33, 1010, 10.1111/j.1745-4530.2008.00321.x Kulju, 2011, Flow modifiers for preventing sedimentation in heat exchangers, J. Fluids Eng., 133, 10.1115/1.4004942 Barzegarian, 2017, Thermal performance augmentation using water based Al2O3-gamma nanofluid in a horizontal shell and tube heat exchanger under forced circulation, Int. Commun. Heat Mass Transfer, 86, 52, 10.1016/j.icheatmasstransfer.2017.05.021 Rao, 2016, Numerical and heat transfer analysis of shell and tube heat exchanger with circular and elliptical tubes, Int. J. Mech. Mater. Eng., 11, 6, 10.1186/s40712-016-0059-x M. Taws, C.T. Nguyen, N. Galanis, I. Gherasim, Experimental investigation of nanofluid heat transfer in a plate heat exchanger, in Proceedings of the ASME 2012 Summer Heat Transfer Conference, Rio Grande, Puerto Rico, 2012, 58016. Stogiannis, 2013, CFD modelling of hydrodynamics and heat transfer in channels of a PHE, Chem. Eng. Trans., 35, 1285 Shen, 2014, Vortices evolution in confined laminar radial flow between parallel discs, Chem. Eng. Sci., 116, 834, 10.1016/j.ces.2014.05.013 Arsenyeva, 2015, Shell-and-plate heat exchangers for efficient heat recovery under the industrial application, Chem. Eng. Trans., 45, 1231 Zhang, 2014, Parametric study on flow and heat transfer performance of multi-flow spiral-wound heat exchanger, Chem. Eng. Trans., 39, 319 Pitz, 2017, Effect of the Reynolds number on viscoelastic fluid flows through axisymmetric sudden contraction, J. Braz. Soc. Mech. Sci. Eng., 39, 1709, 10.1007/s40430-017-0719-7 Zhang, 2016, Study on local resistance of non-Newtonian power law fluid in elbow pipes, J. Therm. Sci., 25, 287, 10.1007/s11630-016-0862-y Bluestein, 2019, Turbulent flow through a ducted elbow and plugged tee geometry: An experimental and numerical study, J. Fluids Eng., 141, 10.1115/1.4042256 Singh, 2015, Numerical simulations for multi-hole orifice flow meter, Flow Meas. Instrum., 45, 375, 10.1016/j.flowmeasinst.2015.08.004 Sun, 2017, Numerical investigation of the effect of surface roughness on the flow coefficient of an eccentric butterfly valve, J. Mech. Sci. Technol., 31, 2839, 10.1007/s12206-017-0527-0 Coroneo, 2012, Computational fluid dynamics modeling of corrugated static mixers for turbulent applications, Ind. Eng. Chem. Res., 51, 15986, 10.1021/ie300398z Manshoor, 2013, Simulation of laminar mixing in fractal perforated plate static mixers, Adv. Mat. Res., 845, 31 Liu, 2017, Effect of flushing on the detachment of biofilms attached to the walls of metal pipes in water distribution systems, J. Zhejiang Univ.-Sci. A (Appl. Phys. Eng.), 18, 313, 10.1631/jzus.A1600316 Zhao, 2010, Simulations of axial mixing of Liquids in a long horizontal pipe for industrial applications, Energy Fuels, 24, 5844, 10.1021/ef100846r Hoang, 2011, Effects of process parameters on gypsum scale formation in pipes, Chem. Eng. Technol., 34, 1003, 10.1002/ceat.201100067 Georgantopoulou, 2018, Recirculating flows analysis and estimation inside channels, MATEC Web Conf., 172, 01001, 10.1051/matecconf/201817201001 Weickert, 2010, Investigation of the LES WALE turbulence model within the lattice Boltzmann framework, Compus. Math. Appl., 59, 2200, 10.1016/j.camwa.2009.08.060 C. Cotas, F. Garcia, P. Ferreira, P. Faia, D. Asendrych, M.G. Rasteiro, Chang-Hsieh-Chen low-Reynolds k-ε turbulence model adaptation to study the flow of concentrated pulp suspensions in pipes, 11th WCCM, 5th ECCM, 6th ECFD, Barcelona, Spain, 2014, pp. 7313-7324. Cotas, 2015, Numerical simulation of turbulent pulp flow of concentrated suspensions: Influence of the non-Newtonian properties of the pulp, Particul. Sci. Technol., 34, 442, 10.1080/02726351.2015.1112330 Campagna, 2015, Fluid flow measurements by means of vibration monitoring, Meas. Sci. Technol., 26, 10.1088/0957-0233/26/11/115306 Chaudhury, 2015, Length and time for development of laminar flow in tubes following a step increase of volume flux, Exp. Fluids, 56, 22, 10.1007/s00348-014-1886-2 Jin, 2016, Rotary magnetic field combined with pipe fluid technique for efficient extraction of pumpkin polysaccharides, Innov. Food Sci. Emerg. Technol., 35, 103, 10.1016/j.ifset.2016.04.012 Maraschin, 2020, Aluminum sludge thickening: Novel helical pipes for aggregation by dual flocculation and thickening by filtration applied to water treatment plants, Sep. Purif. Technol., 241, 10.1016/j.seppur.2020.116560 Georgantopoulou, 2017, Inclination angle effect and separation zones estimation for incompressible flows inside pipes using sub-grids refinement, WSEAS Trans. Fluid Mech., 12, 116 A. Bergant, J. Greforc, T. Wahl, K. Urbanowicz, Analysis of pulsating flow in a large-scale pipeline close to resonance conditions, 13th International Conference on Pressure SurgesBordeaux, France, 2018, pp. 423-437. Sanaa, 2018, A numerical modeling of a profile velocity and shear stress in transient flow applied in industrial technology, Period Eng. Nat. Sci., 6, 323 Haussmann, 2019, Large-eddy simulation coupled with wall models for turbulent channel flows at high Reynolds numbers with a lattice Boltzmann method - Application to Coriolis mass flowmeter, Comput. Math. Appl., 78, 3285, 10.1016/j.camwa.2019.04.033 Zhang, 2013, Pressure of Newtonian fluid flow through curved pipes and elbows, J. Therm. Sci., 22, 372, 10.1007/s11630-013-0638-6 Georgantopoulou, 2016, Newtonian flow modeling through 90° pipes bends, ARPN J. Eng. Appl. Sci., 11, 10110 Aloui, 2011, Experimental and numerical investigations of a turbulent flow behavior in isolated and nonisolated conical diffusers, J. Fluids Eng., 133, 10.1115/1.4003236 Woziwodzki, 2011, Effect of eccentricity on laminar mixing in vessel stirred by double turbine impellers, Chem. Eng. Res. Des., 89, 2268, 10.1016/j.cherd.2011.04.004 Han, 2012, Numerical simulation on micromixing of viscous fluids in a stirred-tank reactor, Chem. Eng. Sci., 74, 9, 10.1016/j.ces.2012.02.018 Gomez-Rios, 2019, Characterization of the metabolic response of Streptomyces clavuligerus to shear stress in stirred tanks and single-use 2D rocking motion bioreactors for clavulanic acid production, Antibiotics (Basel), 8, 168, 10.3390/antibiotics8040168 Montante, 2015, Fluid dynamics characterization of a stirred model bio-methanation digester, Chem. Eng. Res. Des., 93, 38, 10.1016/j.cherd.2014.05.003 Walther, 2014, Prediction of inclusion body solubilization from shaken to stirred reactors, Biotechnol. Bioeng., 111, 84, 10.1002/bit.24998 Baudron, 2019, A continuous approach to the emulsion gelation method for the production of aerogel micro-particle, Colloids Surf. A Physicochem. Eng. Asp., 566, 58, 10.1016/j.colsurfa.2018.12.055 Abdulrasaq, 2019, The effect of hydrodynamic parameters on the production of Pickering emulsions in a baffled stirred tank, AIChE J., 65, 1, 10.1002/aic.16691 Jaszczur, 2020, Effect of impeller design on power characteristics and Newtonian fluids mixing efficiency in a mechanically agitated vessel at low Reynolds numbers, Energies, 13, 640, 10.3390/en13030640 Kamla, 2019, Performance of new designed anchor impellers in stirred tanks, Chem. Zvesti, 74, 779 Mazzanti, 2011, Effects of shear rate variation on the nanostructure of crystallizing triglycerides, Cryst. Growth Des., 11, 4544, 10.1021/cg200786k Yousuf, 2019, Quantitative link between secondary nucleation and mixing hydrodynamics in batch cooling crystallization: a new approach in process development, Org. Process. Res. Dev., 23, 2009, 10.1021/acs.oprd.9b00258 Harsfalvi, 2017, Computational fluid dynamic analysis of cooling in a mixed vessel using a non-Newtonian medium, Chem. Eng. Trans., 61, 565 Rosa, 2017, Nusselt’s correlations in agitated tanks using the spiral coil with Rushton turbine and PBT 45° impeller. Comparison with tanks containing vertical tube baffles, Appl. Therm. Eng., 110, 1331, 10.1016/j.applthermaleng.2016.09.035 Lelieveld, 2016 Raposo, 2012, Effects of the hydrodynamic environment and oxygen mass transfer on plant cell growth and milk-clotting protease production in a stirred-tank reactor, Eng. Life Sci., 12, 441, 10.1002/elsc.201100087 Li, 2017, CFD simulation of local and global mixing time in an agitated tank, Chin. J. Mech. Eng., 30, 118, 10.3901/CJME.2016.1107.129 Deniz, 2015, Evaluation of scale-up parameters of bioethanol production from Escherichia coli KO11, Turkish, J. Biochem., 40, 74 Li, 2020, Novel scale-up strategy based on three-dimensional shear space for animal cell culture, Chem. Eng. Sci., 212, 10.1016/j.ces.2019.115329 Kim, 2012, Batch, fed-batch, and microcarrier cultures with CHO cell lines in a pressure-cycle driven miniaturized bioreactor, Biotechnol. Bioeng., 109, 137, 10.1002/bit.23289 Bulnes-A, 2013, A simple eccentric stirred tank mini-bioreactor: mixing characterization and mammalian cell culture experiments, Biotechnol. Bioeng., 110, 1106, 10.1002/bit.24780 Oliver-S, 2013, Shear rate and microturbulence effects on the synthesis of proteases by Jacaratia mexicana cells cultured in a bubble column, airlift, and stirred tank bioreactors, Biotechnol. Bioprocess. Eng., 18, 808, 10.1007/s12257-012-0736-4 Collignon, 2010, Axial impeller selection for anchorage dependent animal cell culture in stirred bioreactors: Methodology based on the impeller comparison at just-suspended speed of rotation, Chem. Eng. Sci., 65, 5929, 10.1016/j.ces.2010.08.027 Li, 2013, Effects of flow field on the metabolic characteristics of Streptomyces lincolnensis in the industrial fermentation of lincomycin, J. Biosci. Bioeng., 115, 27, 10.1016/j.jbiosc.2012.07.015 Ramírez-M, 2017, A direct calculation method of the Metzner-Otto constant by using computational fluid dynamics, Chem. Eng. Sci., 174, 347, 10.1016/j.ces.2017.09.023 Koncsag, 2015, Modeling the mixing process of industrial and domestic wastewater sludge, Environ. Eng. Manag. J., 14, 1241, 10.30638/eemj.2015.134 Rahmani, 2013, Laminar flow characterization in a stirred tank with a gate impeller in case of a non-Newtonian fluid, Energy Procedia, 36, 418, 10.1016/j.egypro.2013.07.048 Scargiali, 2013, Power consumption in uncovered unbaffled stirred tanks: Influence of the viscosity and flow regime, Ind. Eng. Chem. Res., 52, 14998, 10.1021/ie402466w Dančová, 2016, Study of blades inclination influence of gate impeller with a non-Newtonian fluid of Bingham, EPJ Web Conf., 02101 Imamoglu, 2013, Scale-up and kinetic modeling for bioethanol production, Bioresour. Technol., 144, 311, 10.1016/j.biortech.2013.06.118 Stobiac, 2014, Investigation of the accuracy of the extrapolation method for the lattice Boltzmann simulation of viscous fluid flow in a Maxblend impeller system, Comput. Chem. Eng., 60, 112, 10.1016/j.compchemeng.2013.08.013 Cudmore, 2015, A model of impeller whirl for baffled mixing vessels, J. Fluids Struct., 54, 719, 10.1016/j.jfluidstructs.2015.01.010 Escamilla-Ruíz, 2017, Experimental data and numerical predictions of a single-phase flow in a batch square stirred tank reactor with a rotating cylinder agitator, Heat Mass Transf., 53, 2933, 10.1007/s00231-017-2030-7 Sirasitthichoke, 2017, Power dissipation and power number correlations for a retreat-blade impeller under different baffling conditions, Ind. Eng. Chem. Res., 56, 10123, 10.1021/acs.iecr.7b02634 Yang, 2011, Experimental study and detached eddy simulation of the macro-instability in an eccentric stirred tank, Appl. Mech. Mater., 66–68, 20, 10.4028/www.scientific.net/AMM.66-68.20 Gumery, 2011, Macromixing hydrodynamic study in draft-tube airlift reactors using electrical resistance tomography, Bioprocess Biosyst. Eng., 34, 135, 10.1007/s00449-010-0454-2 Pechaud, 2012, Combining hydrodynamic and enzymatic treatments to improve multi-species thick biofilm removal, Chem. Eng. Sci., 80, 109, 10.1016/j.ces.2012.06.014 Khali, 2013, Numerical investigation of non-Newtonian fluids in annular ducts with finite aspect ratio using lattice Boltzmann method, Phys. Rev. E Stat. Nonlin. Soft Matter Phys., 87, 10.1103/PhysRevE.87.053002 Ohsawa, 2016, Through-flow effects on Nusselt number and torque coefficient in Taylor-Couette-Poiseuille flow investigated by large eddy simulation, J. Therm. Sci. Technol., 11, 16, 10.1299/jtst.2016jtst0031 Saur, 2017, Impact of wall shear stress on initial bacterial adhesion in rotating annular reactor, PLoS One, 12, 10.1371/journal.pone.0172113 Cagney, 2019, Taylor-Couette flow of shear-thinning fluids, Phys. Fluids, 31, 10.1063/1.5088143 Naseem, 2019, Experimental investigation of flow instabilities in a wide gap turbulent rotating Taylor-Couette flow, Case Stud. Therm. Eng., 14, 10.1016/j.csite.2019.100449 Sun, 2020, Enhancing crystal growth using polyelectrolyte solutions and shear flow, Nature, 579, 73, 10.1038/s41586-020-2042-1 Kotti, 2013, Impact of hydrodynamic regime on the capacity of oxygen transfer in a stirred electroflotation column, Desalination Water Treat., 52, 1693, 10.1080/19443994.2013.874136 P.M. Doran, Mixing, in: P.M. Doran (Ed.) Bioprocess engineering principles, Elsevier Inc., USA, 2013, pp. 255-332. Nikolaeva, 2019, Manipulation of recrystallization and network formation of oil-dispersed micronized fat crystals, Langmuir, 35, 2221, 10.1021/acs.langmuir.8b03349 Ashassi-Sorkhabi, 2014, Effects of solution hydrodynamics on corrosion inhibition of steel by citric acid in cooling water, J. Mater. Eng. Perform., 23, 2992, 10.1007/s11665-014-1047-z de Radiguès, 2019, On the use of 3-D electrodes and pulsed voltage for the process intensification of alkaline water electrolysis, Int. J. Hydrog Energy, 44, 29432, 10.1016/j.ijhydene.2019.06.156 Toyoda, 2019, Design of a flow reactor system for safe handling of phosgenation reactions: Scale-up study of T-shaped mixers for industrial chemical production, J. Chem. Eng. Japan, 52, 773, 10.1252/jcej.19we068 García, 2018, The role of insert devices on enhancing heat transfer in a flat-plate solar water collector, Appl. Therm. Eng., 132, 479, 10.1016/j.applthermaleng.2017.12.090 da Silva, 2019, Longitudinal vortex generator applied to heat transfer enhancement of a flat plate solar water heater, Appl. Therm. Eng., 158, 10.1016/j.applthermaleng.2019.113790 Ram kumar, 2020, Performance analysis of solar water heater by using TiO2 nanofluids, Mater. Today – Proc., 21, 817, 10.1016/j.matpr.2019.07.251 Hernández-Melchor, 2017, Hydrodynamic and mass transfer characterization of flat-panel airlift photobioreactors for the cultivation of a photosynthetic microbial consortium, Biochem. Eng. J., 128, 141, 10.1016/j.bej.2017.09.014 Ramírez-Duque, 2011, Hydrodynamic computational evaluation in solar tubular photobioreactors bends with different cross sections, CT&F – Cienc. Tecn. Fut., 4, 59, 10.29047/01225383.229 Chu, 2019, Direct numerical simulation of convective heat transfer in porous media, Int. J. Heat Mass Transf., 133, 11, 10.1016/j.ijheatmasstransfer.2018.11.172 Huang, 2019, Mixing process of two miscible fluids in a lid-driven cavity, Chem. Eng. J., 362, 229, 10.1016/j.cej.2019.01.024 Nan, 2019, Experimental investigation on the packed bed of rodlike particles, Adv. Powder Technol., 30, 2541, 10.1016/j.apt.2019.07.034 Bremer, 2009, Biofilms in Dairy Processing, 396 Melo, 1992, Biofilms in Water Distribution and Industrial Systems - Biofouling in Heat Exchangers, 499 Cunault, 2015, A novel set-up and a CFD approach to study the biofilm dynamics as a function of local flow conditions encountered in fresh-cut food processing equipments, Food Bioprod. Process, 93, 217, 10.1016/j.fbp.2014.07.005 Teodósio, 2011, Flow cell hydrodynamics and their effects on E. coli biofilm formation under different nutrient conditions and turbulent flow, Biofouling, 27, 1, 10.1080/08927014.2010.535206 Brugnoni, 2011, Role of shear stress on biofilm formation of Candida krusei in a rotating disk system, J. Food Eng., 102, 266, 10.1016/j.jfoodeng.2010.08.029 Perrin, 2018, Design of a rotating disk reactor to assess the colonization of biofilms by free-living amoebae under high shear rates, Biofouling, 34, 368, 10.1080/08927014.2018.1444756 Lemos, 2015, The effect of shear stress on the formation and removal of Bacillus cereus biofilms, Food Bioprod. Proc., 93, 242, 10.1016/j.fbp.2014.09.005 Gomes, 2018, The action of chemical and mechanical stresses on single and dual species biofilm removal of drinking water bacteria, Sci. Total Environ., 631–632, 987, 10.1016/j.scitotenv.2018.03.042 Moreira, 2015, The impact of material properties, nutrient load and shear stress on biofouling in food industries, Food Bioprod. Proc., 95, 228, 10.1016/j.fbp.2015.05.011 Yuan, 2018, Interspecies variation in biofilm-forming capacity of psychrotrophic bacterial isolates from Chinese raw milk, Food Control, 91, 47, 10.1016/j.foodcont.2018.03.026 Araújo, 2016, Influence of flow velocity on the characteristics of Pseudomonas fluorescens biofilms, J. Environ. Eng., 142, 04016031, 10.1061/(ASCE)EE.1943-7870.0001068 Tsagkari, 2018, Turbulence accelerates the growth of drinking water biofilms, Bioprocess. Biosyst. Eng., 41, 757, 10.1007/s00449-018-1909-0 Tarifa, 2018, In situ microstructure and rheological behavior of yeast biofilms from the juice processing industries, Biofouling, 34, 74, 10.1080/08927014.2017.1407758 Hou, 2018, Extracellular polymeric matrix production and relaxation under fluid shear and mechanical pressure in Staphylococcus aureus biofilms, Appl. Environ. Microbiol., 84, e01516, 10.1128/AEM.01516-17 Simões, 2005, Action of a cationic surfactant on the activity and removal of bacterial biofilms formed under different flow regimes, Water Res., 39, 478, 10.1016/j.watres.2004.09.018 Simões, 2003, Effect of different concentrations of ortho-phthalaldehyde on biofilms formed by Pseudomonas fluorescens under different flow conditions, Biofouling, 19, 287, 10.1080/0892701031000153398 Shen, 2015, Role of biofilm roughness and hydrodynamic conditions in Legionella pneumophila adhesion to and detachment from simulated drinking water biofilms, Environ. Sci. Technol., 49, 4274, 10.1021/es505842v Diaz-Bejarano, 2017, Organic and inorganic fouling in heat exchangers – Industrial case study: Analysis of fouling state, Appl. Energy, 206, 1250, 10.1016/j.apenergy.2017.10.018 Habimana, 2018, One particle, two targets: A combined action of functionalised gold nanoparticles, against Pseudomonas fluorescens biofilms, J. Colloid Interface Sci., 526, 419, 10.1016/j.jcis.2018.05.014 Sirelkhatim, 2015, Review on Zinc Oxide nanoparticles: Antibacterial activity and toxicity mechanism, Nanomicro Lett., 7, 219 Radkar, 2019, Intensified convective heat transfer using ZnO nanofluids in heat exchanger with helical coiled geometry at constant wall temperature, Mater. Sci. Energy Technol., 2, 161 Awasthi, 2020, Dose dependent enhanced antibacterial effects and reduced biofilm activity against Bacillus subtilis in presence of ZnO nanoparticles, Mater. Sci. Eng. C Mater. Biol. Appl., 113, 10.1016/j.msec.2020.111021 Krol, 2019, Genome rearrangements induce biofilm formation in Escherichia coli C - an old model organism with a new application in biofilm research, BMC Genomics, 20, 767, 10.1186/s12864-019-6165-4 Kleine, 2019, Monitoring of biofilms grown on differentially structured metallic surfaces using confocal laser scanning microscopy, Eng. Life Sci., 19, 513, 10.1002/elsc.201800176 Shen, 2019, Visible-light-responsive photocatalyst of graphitic carbon nitride for pathogenic biofilm control, ACS Appl. Mater. Interfaces, 11, 373, 10.1021/acsami.8b18543 Turetgen, 2019, The efficacy of nano silver sulfadiazine and nano benzalkonium chloride on heterotrophic biofilms, Microbiology, 88, 94, 10.1134/S0026261719010089 De Cesare, 2019, A study on the dependence of bacteria adhesion on the polymer nanofibre diameter, Environ. Sci. Nano, 6, 778, 10.1039/C8EN01237G Yau, 2018, Cold plasma effect on the proteome of Pseudomonas aeruginosa - Role for bacterioferritin, PLoS One, 13, 10.1371/journal.pone.0206530 Anthonydhason, 2018, Nanocarbon effect of smoking biofilms for effective control, J. Clust. Sci., 29, 541, 10.1007/s10876-018-1394-2 Budil, 2018, Anti-adhesive properties of nanocrystalline diamond films against Escherichia coli bacterium: Influence of surface termination and cultivation medium, Diam. Relat. Mater., 83, 87, 10.1016/j.diamond.2018.02.001 Lemire, 2017, Silver oxynitrate - an efficacious compound for the prevention and eradication of dual-species biofilms, Biofouling, 33, 460, 10.1080/08927014.2017.1322586 Liu, 2017, Sodium lactate negatively regulates Shewanella putrefaciens CN32 biofilm formation via a three-component regulatory system, Appl. Environ. Microbiol., 83, e00712, 10.1128/AEM.00712-17 Kim, 2017, Lauroyl arginate ethyl blocks the iron signals necessary for Pseudomonas aeruginosa biofilm development, Front. Microbiol., 8, 970, 10.3389/fmicb.2017.00970 Kim, 2016, Raffinose, a plant galactoside, inhibits Pseudomonas aeruginosa biofilm formation via binding to LecA and decreasing cellular cyclic diguanylate levels, Sci. Rep., 6, 25318, 10.1038/srep25318 Gillett, 2016, Laser surface modification for the prevention of biofouling by infection causing Escherichia coli, J. Laser Appl., 28, 10.2351/1.4944442 Golberg, 2016, Novel anti-adhesive biomaterial patches: preventing biofilm with Metal Complex Films (MCF) derived from a microalgal polysaccharide, Adv. Mater. Interfaces, 3, 1500486, 10.1002/admi.201500486 Cheng, 2017, FlrA represses transcription of the biofilm-associated bpfA operon in Shewanella putrefaciens, Appl. Environ. Microbiol., 83, e02410, 10.1128/AEM.02410-16 Kvasnickova, 2015, Evaluation of baicalein, chitosan and usnic acid effect on Candida parapsilosis and Candida krusei biofilm using a Cellavista device, J. Microbiol. Meth., 118, 106, 10.1016/j.mimet.2015.09.002 Harmsen, 2010, Role of extracellular DNA during biofilm formation by Listeria monocytogenes, Appl. Environ. Microbiol., 76, 2271, 10.1128/AEM.02361-09 Chew, 2014, Dynamic remodeling of microbial biofilms by functionally distinct exopolysaccharides, mBio, 5, e01536, 10.1128/mBio.01536-14 Moreira, 2013, Influence of flow rate variation on the development of Escherichia coli biofilms, Bioprocess. Biosyst. Eng., 36, 1787, 10.1007/s00449-013-0954-y Sanchez, 2013, Assessment of change in biofilm architecture by nutrient concentration using a multichannel microdevice flow system, J. Biosci. Bioeng., 115, 326, 10.1016/j.jbiosc.2012.09.018 Hamid, 2013, Bacillus cereus adhesion: Real time investigation of the effect on the chemistry of industrial stainless steel, Microbiology, 82, 22, 10.1134/S0026261713010165 Epstein, 2012, Liquid-infused structured surfaces with exceptional anti-biofouling performance, Proc. Natl. Acad. Sci. USA, 109, 13182, 10.1073/pnas.1201973109 Applerot, 2012, ZnO nanoparticle-coated surfaces inhibit bacterial biofilm formation and increase antibiotic susceptibility, RSC Adv., 2, 2314, 10.1039/c2ra00602b Teodósio, 2012, Setup and validation of flow cell systems for biofouling simulation in industrial settings, Sci. World J., 2012, 10.1100/2012/361496 Gattlen, 2011, Biofilm formation by the yeast Rhodotorula mucilaginosa: process, repeatability and cell attachment in a continuous biofilm reactor, Biofouling, 27, 979, 10.1080/08927014.2011.619657 Shibli, 2011, CeO2–TiO2 mixed oxide incorporated high performance hot dip zinc coating, Surf. Coat. Technol., 205, 2931, 10.1016/j.surfcoat.2010.10.067 Sambanthamoorthy, 2011, Identification of a novel benzimidazole that inhibits bacterial biofilm formation in a broad-spectrum manner, Antimicrob. Agents Chemother., 55, 4369, 10.1128/AAC.00583-11 Ma, 2010, Non-invasive method to quantify local bacterial concentrations in a mixed culture biofilm, J. Ind. Microbiol. Biotechnol., 37, 1081, 10.1007/s10295-010-0756-z Kroukamp, 2010, Pronounced effect of the nature of the inoculum on biofilm development in flow systems, Appl. Environ. Microbiol., 76, 6025, 10.1128/AEM.00070-10 Kaur, 2020, A novel multi-enzyme preparation produced from Aspergillus niger using biodegradable waste: A possible option to combat heterogeneous biofilms, AMB Express, 10, 36, 10.1186/s13568-020-00970-3 Meireles, 2017, Characterization of the heterotrophic bacteria from a minimally processed vegetables plant, LWT, 85, 293, 10.1016/j.lwt.2017.01.038 Moreira, 2016, Evaluation of SICON® surfaces for biofouling mitigation in critical process areas, Food Bioprod. Proc., 98, 173, 10.1016/j.fbp.2016.01.009 Malheiro, 2016, The effects of selected brominated and chlorinated chemicals on Pseudomonas fluorescens planktonic cells and flow-generated biofilms, J. Food Proc. Preserv., 40, 316, 10.1111/jfpp.12609 Moreira, 2016, Evaluation of SICAN performance for biofouling mitigation in the food industry, Food Control, 62, 201, 10.1016/j.foodcont.2015.10.023 Rodriguez-Lopez, 2015, Listeria monocytogenes-carrying consortia in food industry. Composition, subtyping and numerical characterisation of mono-species biofilm dynamics on stainless steel, Int. J. Food Microbiol., 206, 84, 10.1016/j.ijfoodmicro.2015.05.003 Millezi, 2012, Susceptibility of monospecies and dual-species biofilms of Staphylococcus aureus and Escherichia coli to essential oils, J. Food Saf., 32, 351, 10.1111/j.1745-4565.2012.00387.x Habimana, 2011, Spatial competition with Lactococcus lactis in mixed-species continuous-flow biofilms inhibits Listeria monocytogenes growth, Biofouling, 27, 1065, 10.1080/08927014.2011.626124 Oliveira, 2010, Disinfectant action of Cymbopogon sp. essential oils in different phases of biofilm formation by Listeria monocytogenes on stainless steel surface, Food Control, 21, 549, 10.1016/j.foodcont.2009.08.003 Brugnoni, 2011, Biofilm formation under laminar flow conditions of yeast isolated from an apple juice processing plant, J. Food Process Eng., 34, 49, 10.1111/j.1745-4530.2008.00336.x Tyfa, 2015, Evaluation of hydrophobicity and quantitative analysis of biofilm formation by Alicyclobacillus sp, Acta Biochim. Pol., 62, 785, 10.18388/abp.2015_1133 Ziech, 2016, Biofilm-producing ability and tolerance to industrial sanitizers in Salmonella spp. isolated from Brazilian poultry processing plants, LWT, 68, 85, 10.1016/j.lwt.2015.12.021 Rodríguez-López, 2020, Tracking bacteriome variation over time in Listeria monocytogenes-positive foci in food industry, Int. J. Food Microbiol., 315, 10.1016/j.ijfoodmicro.2019.108439 Fysun, 2019, Biofilm and dairy fouling detection in flexible tubing using low-field NMR, Eur. Food Res. Technol., 245, 2579, 10.1007/s00217-019-03371-4 Moradi, 2017, Biofilm removal potential of neutral electrolysed water on pathogen and spoilage bacteria in dairy model systems, J. Appl. Microbiol., 123, 1429, 10.1111/jam.13608 Neyret, 2014, Plant-derived compounds as natural antimicrobials to control paper mill biofilms, J. Ind. Microbiol. Biotechnol., 41, 87, 10.1007/s10295-013-1365-4 Torres, 2011, Enzymatic treatment for preventing biofilm formation in the paper industry, Appl. Microbiol. Biotechnol., 92, 95, 10.1007/s00253-011-3305-4 Blanco, 2011, New tool to monitor biofilm growth in industrial process waters, Ind. Eng. Chem. Res., 50, 5766, 10.1021/ie101422m Pinel, 2020, Bacterial community dynamics and disinfection impact in cooling water systems, Water Res., 172, 10.1016/j.watres.2020.115505 Sanli, 2019, Evaluation of biocidal efficacy of Chloramine T trihydrate on planktonic and sessile bacteria in a model cooling tower water system, Water Sci. Technol., 79, 526, 10.2166/wst.2019.076 Di Pippo, 2017, Green bio-dispersant removal efficacy estimation for controlling biofilms in cooling towers, Ann. Microbiol., 67, 779, 10.1007/s13213-017-1301-3 Rubio, 2015, Assessment of the antifouling effect of five different treatment strategies on a seawater cooling system, Appl. Therm. Eng., 85, 124, 10.1016/j.applthermaleng.2015.03.080 Dos Santos, 2015, Reuse of refinery’s tertiary-treated wastewater in cooling towers: Microbiological monitoring, Environ. Sci. Pollut. Res. Int., 22, 2945, 10.1007/s11356-014-3555-7 Liu, 2012, Effect of CaCO3 particles and suspended bacteria on biofilm components and activity in the model recirculating cooling water system, World J. Microbiol. Biotechnol., 28, 881, 10.1007/s11274-011-0885-1 Turetgen, 2012, Biofilm formation comparison of the SANIPACKING® cooling tower fill material against standard polypropylene fill material in a recirculating model water system Turk, J. Biol., 36, 313 Prithiraj, 2019, Corrosion behaviour of stainless and carbon steels exposed to sulphate – reducing bacteria from industrial heat exchangers, Eng. Fail Anal., 104, 977, 10.1016/j.engfailanal.2019.06.042 Bajoul Kakahi, 2019, Modulation of fungal biofilm physiology and secondary product formation based on physico-chemical surface properties, Bioprocess. Biosyst. Eng., 42, 1935, 10.1007/s00449-019-02187-6 Aracri, 2019, Extracellular tannase from Aspergillus ochraceus: influence of the culture conditions on biofilm formation, enzyme production, and application, J. Microbiol. Biotechnol., 29, 1749, 10.4014/jmb.1903.03060 Espeso, 2018, Dynamics of Pseudomonas putida biofilms in an upscale experimental framework, J. Ind. Microbiol. Biotechnol., 45, 899, 10.1007/s10295-018-2070-0 Zhu, 2018, Recombinant Escherichia coli BL21-pET28a-egfp cultivated with nanomaterials in a modified microchannel for biofilm formation, Int. J. Mol. Sci., 19, 2590, 10.3390/ijms19092590 Mahdinia, 2018, Optimization of Bacillus subtilis natto growth parameters in glycerol-based medium for vitamin K (Menaquinone-7) production in biofilm reactors, Bioprocess. Biosyst. Eng., 41, 195, 10.1007/s00449-017-1857-0 Lima-Pérez, 2018, Differences in growth physiology and aggregation of Pichia pastoris cells between solid-state and submerged fermentations under aerobic conditions, J. Chem. Technol. Biotechnol., 93, 527, 10.1002/jctb.5384 Izmirlioglu, 2017, Simultaneous saccharification and fermentation of ethanol from potato waste by co-cultures of Aspergillus niger and Saccharomyces cerevisiae in biofilm reactors, Fuel, 202, 260, 10.1016/j.fuel.2017.04.047 Wigneswaran, 2016, Biofilm as a production platform for heterologous production of rhamnolipids by the non-pathogenic strain Pseudomonas putida KT2440, Microb. Cell Fact., 15, 181, 10.1186/s12934-016-0581-9 Izmirlioglu, 2016, Ethanol production in biofilm reactors from potato waste hydrolysate and optimization of growth parameters for Saccharomyces cerevisiae, Fuel, 181, 643, 10.1016/j.fuel.2016.05.047 Ercan, 2013, Production of human lysozyme in biofilm reactor and optimization of growth parameters of Kluyveromyces lactis K7, Appl. Microbiol. Biotechnol., 97, 6211, 10.1007/s00253-013-4944-4 Boukazia, 2021, On-line biofouling monitoring and qualification based on local thermal and periodic excitation with MEMS sensor, Food Bioprod. Proc., 126, 12, 10.1016/j.fbp.2020.12.003 Rao, 2017, Microbial fouling in a water treatment plant and its control using biocides, Biocontrol Sci., 22, 105, 10.4265/bio.22.105 Jin, 2012, Performance of sequencing batch biofilm reactors with different control systems in treating synthetic municipal wastewater, Bioresour. Technol., 104, 12, 10.1016/j.biortech.2011.08.086 Sudarjanto, 2011, A laboratory assessment of the impact of brewery wastewater discharge on sulfide and methane production in a sewer, Water Sci. Technol., 64, 1614, 10.2166/wst.2011.733 K.B. De León, G.M. Zane, V.V. Trotter, G.P. Krantz, A.P. Arkin, G.P. Butland, P.J. Walian, M.W. Fields, J.D. Wall, Unintended laboratory-driven evolution reveals genetic requirements for biofilm formation by Desulfovibrio vulgaris Hildenborough, mBio 8 (2017), e01696-17. Zanoni, 2016, Antifouling activity of enzyme-functionalized silica nanobeads, Biotechnol. Bioeng., 113, 501, 10.1002/bit.25835 Teodósio, 2013, Flow cells as quasi-ideal systems for biofouling simulation of industrial piping systems, Biofouling, 29, 953, 10.1080/08927014.2013.821467 Melo, 2011, Formation of biofilms and biocorrosion on AISI-1020 carbon steel exposed to aqueous systems containing different concentrations of a diesel/biodiesel mixture, Int. J. Corros., 2011, 10.1155/2011/415920 Lambert, 2010, Evaluation of ultrasound technology for the disinfection of process water and the prevention of biofilm formation in a pilot plant, Water Sci. Technol., 61, 1089, 10.2166/wst.2010.735 Rygala, 2020, Heterotrophic plate count for bottled water safety management, Processes, 8, 739, 10.3390/pr8060739 Florjanic, 2011, The control of biofilm formation by hydrodynamics of purified water in industrial distribution system, Int. J. Pharm., 405, 16, 10.1016/j.ijpharm.2010.11.038 Ozcan, 2019, Quorum sensing inhibition as a promising method to control biofilm growth in metalworking fluids, J. Ind. Microbiol. Biotechnol., 46, 1103, 10.1007/s10295-019-02181-7 Trafny, 2015, Microbial contamination and biofilms on machines of metal industry using metalworking fluids with or without biocides, Int. Biodeterior. Biodegr., 99, 31, 10.1016/j.ibiod.2014.12.015 Zeriouh, 2019, New insights into developing antibiofouling surfaces for industrial photobioreactors, Biotechnol. Bioeng., 116, 2212, 10.1002/bit.27013