Overview of the Development of 3D-Printing Concrete: A Review

Meng, W. (2021). 3D printing technology and application trend analysis. Technol. Innov. Appl., 146–148.

Hu, J. (2020). 3D printing technology research status and key technologies. Shihezi Sci. Technol., 14–15.

Nasir, 2014, An analysis of construction productivity differences between Canada and the United States, Constr. Manag. Econ., 32, 595, 10.1080/01446193.2013.848995

Bock, 2015, The future of construction automation: Technological disruption and the upcoming ubiquity of robotics, Autom. Constr., 59, 113, 10.1016/j.autcon.2015.07.022

Pegna, 1997, Exploratory investigation of solid freeform construction, Autom. Constr., 5, 427, 10.1016/S0926-5805(96)00166-5

Khoshnevis, 2001, Experimental investigation of contour crafting using ceramics materials, Rapid Prototyp. J., 7, 32, 10.1108/13552540110365144

Khoshnevis, B. (1999, January 9–11). Contour crafting-state of development. Proceedings of the Solid Freeform Fabrication Proceedings, Austin, TX, USA.

Lim, S., Le, T., Webster, J., Buswell, R., Austin, A., Gibb, A., and Thorpe, T. (2009, January 13–16). Fabricating construction components using layered manufacturing technology. Proceedings of the Global Innovation in Construction Conference, Loughborough, UK.

Lim, 2012, Developments in construction-scale additive manufacturing processes, Autom. Constr., 21, 262, 10.1016/j.autcon.2011.06.010

Hack, 2014, Mesh-mould: Robotically fabricated spatial meshes as reinforced concrete formwork, Archit. Des., 84, 44

Pfändler, P., Wangler, T., Mata-Falcón, J., Flatt, R.J., and Kaufmann, W. (2018). Potentials of steel fibres for mesh mould elements. Proceedings of the RILEM International Conference on Concrete and Digital Fabrication, Springer.

Lloret, 2015, Complex concrete structures: Merging existing casting techniques with digital fabrication, Comput. Aided Des., 60, 40, 10.1016/j.cad.2014.02.011

Liu, M. (2019). Experimental Study and Engineering Practice of 3D Printing Concrete Wall Axial Compression Performance, Harbin Institute of Technology.

Buswell, 2018, 3D printing using concrete extrusion: A roadmap for research, Cem. Concr. Res., 112, 37, 10.1016/j.cemconres.2018.05.006

Perrot, 2016, Structural built-up of cement-based materials used for 3D-printing extrusion techniques, Mater. Struct., 49, 1213, 10.1617/s11527-015-0571-0

Le, 2012, Mix design and fresh properties for high-performance printing concrete, Mater. Struct., 45, 1221, 10.1617/s11527-012-9828-z

Gesoglu, 2015, Fresh and rheological behavior of nano-silica and fly ash blended self-compacting concrete, Constr. Build. Mater., 95, 29, 10.1016/j.conbuildmat.2015.07.142

Zhang, 2019, Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content, Cem. Concr. Compos., 104, 103406, 10.1016/j.cemconcomp.2019.103406

Qian, 2019, Utilization of recycled glass for 3D concrete printing: Rheological and mechanical properties, J. Mater. Cycles Waste Manag., 21, 994, 10.1007/s10163-019-00857-x

Zhang, 2016, Effects of superplasticizers and retarders on the fluidity and strength of sulphoaluminate cement, Constr. Build. Mater., 126, 44, 10.1016/j.conbuildmat.2016.09.019

Ma, 2018, Printable properties of cementitious material containing copper tailings for extrusion based 3D printing, Constr. Build. Mater., 162, 613, 10.1016/j.conbuildmat.2017.12.051

Tay, 2019, Printability region for 3D concrete printing using slump and slump flow test, Compos. Part B Eng., 174, 106968, 10.1016/j.compositesb.2019.106968

Liu, 2018, Research progress of 3D printing cement-based materials for construction, J. North China Univ. Sci. Technol., 40, 46

Khalil, 2017, Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars, Constr. Build. Mater., 157, 382, 10.1016/j.conbuildmat.2017.09.109

Malaeb, Z., AlSakka, F., and Hamzeh, F. (2019). 3D concrete printing: Machine design, mix proportioning, and mix comparison between different machine setups. 3D concrete printing technology, Butterworth-Heinemann.

Hambach, M., Rutzen, M., and Volkmer, D. (2019). Properties of 3D-printed fiber-reinforced Portland cement paste. 3D Concrete Printing Technology, Butterworth-Heinemann.

Lafhaj, Z., Rabenantoandro, A.Z., El Moussaoui, S., Dakhli, Z., and Youssef, N. (2019). Experimental approach for printability assessment: Toward a practical decision-making framework of printability for cementitious materials. Buildings, 9.

Chen, Y., Li, Z., Figueiredo, S.C., Çopuroğlu, O., Veer, F., and Schlangen, E. (2019). Limestone and calcined clay-based sustainable cementitious materials for 3D concrete printing: A fundamental study of extrudability and early-age strength development. Appl. Sci., 9.

Shakor, 2017, Modified 3D printed powder to cement-based material and mechanical properties of cement scaffold used in 3D printing, Constr. Build. Mater., 138, 398, 10.1016/j.conbuildmat.2017.02.037

Long, 2019, Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing, J. Clean. Prod., 239, 118054, 10.1016/j.jclepro.2019.118054

Yuan, 2019, A feasible method for measuring the buildability of fresh 3D printing mortar, Constr. Build. Mater., 227, 116600, 10.1016/j.conbuildmat.2019.07.326

Bhattacherjee, S., and Santhanam, M. (2020, January 6–8). Enhancing buildability of 3D printable concrete by spraying of accelerating admixture on surface. Proceedings of the 2nd RILEM International Conference on Concrete and Digital Fabrication, Eindhoven, The Netherlands.

Le, 2012, Hardened properties of high-performance printing concrete, Cem. Concr. Res., 42, 558, 10.1016/j.cemconres.2011.12.003

Ogura, H., Nerella, V.N., and Mechtcherine, V. (2018). Developing and testing of strain-hardening cement-based composites (SHCC) in the context of 3D-printing. Materials, 11.

Zareiyan, 2017, Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete, Autom. Constr., 83, 212, 10.1016/j.autcon.2017.08.019

Kazemian, 2017, Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture, Constr. Build. Mater., 145, 639, 10.1016/j.conbuildmat.2017.04.015

Chen, 2020, Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture, Cem. Concr. Res., 132, 106040, 10.1016/j.cemconres.2020.106040

Aqel, 2016, Hydration kinetics and compressive strength of steam-cured cement pastes and mortars containing limestone filler, Constr. Build. Mater., 113, 359, 10.1016/j.conbuildmat.2016.03.031

Ma, 2018, A critical review of preparation design and workability measurement of concrete material for largescale 3D printing, Front. Struct. Civ. Eng., 12, 382, 10.1007/s11709-017-0430-x

Paul, 2018, Fresh and hardened properties of 3D printable cementitious materials for building and construction, Arch. Civ. Mech. Eng., 18, 311, 10.1016/j.acme.2017.02.008

Christ, 2015, Fiber reinforcement during 3D printing, Mater. Lett., 139, 165, 10.1016/j.matlet.2014.10.065

Weng, 2018, Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model, Constr. Build. Mater., 163, 600, 10.1016/j.conbuildmat.2017.12.112

Panda, 2018, Measurement of tensile bond strength of 3D printed geopolymer mortar, Measurement, 113, 108, 10.1016/j.measurement.2017.08.051

Nerella, 2019, Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing, Constr. Build. Mater., 205, 586, 10.1016/j.conbuildmat.2019.01.235

Hosseini, 2019, A novel method to enhance the interlayer bonding of 3D printing concrete: An experimental and computational investigation, Cem. Concr. Compos., 99, 112, 10.1016/j.cemconcomp.2019.03.008

Ma, 2020, A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing, Constr. Build. Mater., 244, 118305, 10.1016/j.conbuildmat.2020.118305

Li, 2018, Method for the enhancement of buildability and bending resistance of 3D printable tailing mortar, Int. J. Concr. Struct. Mater., 12, 37, 10.1186/s40069-018-0269-0

Xia, 2018, Methods of enhancing strength of geopolymer produced from powder-based 3D printing process, Mater. Lett., 227, 281, 10.1016/j.matlet.2018.05.100

Weng, 2019, Printability and fire performance of a developed 3D printable fibre reinforced cementitious composites under elevated temperatures, Virtual Phys. Prototyp., 14, 284, 10.1080/17452759.2018.1555046

Weger, D., Lowke, D., Gehlen, C., Talke, D., and Henke, K. (2018, January 10–12). Additive manufacturing of concrete elements using selective cement paste intrusion—Effect of layer orientation on strength and durability. Proceedings of the RILEM 1st International Conference on Concrete and Digital Fabricaton, Zürich, Switzerland.

Pofale, 2013, Study of bond strength between various grade of Ordinary Portland Cement (OPC) and Portland Pozzolane Cement (PPC) mixes and different diameter of TMT bars by using pullout test, Front. Struct. Civ. Eng., 7, 39, 10.1007/s11709-013-0193-y

Sun, 2013, Experimental Research on the Modification of Cement by Polymer Emulsion, Coal Ash, 19, 4167

Chen, 2007, Experimental study on the mixed system of silicate-sulfoaluminate cement, J. Civ. Environ. Eng., 29, 121

Li, 2015, Experimental study on setting performance of magnesium oxysulfide cement, Silic. Bull., 34, 1215

Issa, 2007, Experimental study of epoxy repairing of cracks in concrete, Constr. Build. Mater., 21, 157, 10.1016/j.conbuildmat.2005.06.030

Ahmad, 2013, Repair of cracks in simply supported beams using epoxy injection technique, Mater. Struct., 46, 1547, 10.1617/s11527-012-9996-x

Stievanin, 2012, Efficiency of RC square columns repaired with polymer-modified cementitious mortars, Cem. Concr. Compos., 34, 545, 10.1016/j.cemconcomp.2011.11.020

Pellegrino, 2011, Experimental behaviour of reinforced concrete elements repaired with polymer-modified cementicious mortar, Mater. Struct., 44, 517, 10.1617/s11527-010-9646-0

Assaad, 2019, Thixotropy and interfacial bond strengths of polymer-modified printed mortars, Mater. Struct., 52, 79, 10.1617/s11527-019-1356-7

Yang, 2015, Influence of Polymer Latex on the Interlayer Bonding Performance of Cement Concrete, Advanced Materials Research, Volume 1065, 1780

Bong, S.H., Nematollahi, B., Nazari, A., Xia, M., and Sanjayan, J. (2019). Method of optimisation for ambient temperature cured sustainable geopolymers for 3D printing construction applications. Materials, 12.

Zhang, X., and Gao, P. (2014). Influence of Aggregate on the Dry Shrinkage Performance of Concrete. Fly Ash Compr. Util., 3–7.

Lin, 2018, The influence of fine aggregates on the 3D printing performance, IOP Conference Series: Materials Science and Engineering, Volume 292, 012079, 10.1088/1757-899X/292/1/012079

Kang, 2005, Strengthening effect of GH mineral powder on fly ash concrete, J. Tianjin Univ., 4, 543

Voigt, 2010, Using fly ash, clay, and fibers for simultaneous improvement of concrete green strength and consolidatability for slip-form pavement, J. Mater. Civ. Eng., 22, 196, 10.1061/(ASCE)0899-1561(2010)22:2(196)

Gong, 1993, The Reinforcement Mechanism of Silica Fume on Concrete and Its Experimental Research, J. Chongqing Jiaotong Univ., 12, 1

Marchment, 2020, Mesh reinforcing method for 3D Concrete Printing, Autom. Constr., 109, 102992, 10.1016/j.autcon.2019.102992

Rahul, 2019, 3D printable concrete: Mixture design and test methods, Cem. Concr. Compos., 97, 13, 10.1016/j.cemconcomp.2018.12.014

Zhang, 2019, Rheological and harden properties of the high-thixotropy 3D printing concrete, Constr. Build. Mater., 201, 278, 10.1016/j.conbuildmat.2018.12.061

Tohamy, 2012, The use of rapid prototype templates in reconstructive head & neck surgery. Do they reduce operating time?, Br. J. Oral Maxillofac. Surg., 50, S32, 10.1016/j.bjoms.2012.04.229

Feng, 2015, Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials, Compos. Struct., 134, 331, 10.1016/j.compstruct.2015.08.079

Mechtcherine, V., Michael, A., Liebscher, M., and Schmeier, T. (2020). Extrusion-based additive manufacturing with carbon reinforced concrete: Concept and feasibility study. Materials, 13.

Ding, 2020, Anisotropic behavior in bending of 3D printed concrete reinforced with fibers, Compos. Struct., 254, 112808, 10.1016/j.compstruct.2020.112808

Arunothayan, 2020, Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction, Constr. Build. Mater., 257, 119546, 10.1016/j.conbuildmat.2020.119546

Ma, 2019, Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing, Constr. Build. Mater., 202, 770, 10.1016/j.conbuildmat.2019.01.008

Slavcheva, 2019, Drying and shrinkage of cement paste for 3D printable concrete, IOP Conference Series: Materials Science and Engineering, Volume 481, 012043, 10.1088/1757-899X/481/1/012043

Khoshnevis, 2004, Automated construction by contour crafting—Related robotics and information technologies, Autom. Constr., 13, 5, 10.1016/j.autcon.2003.08.012

Khoshnevis, 2006, Mega-scale fabrication by contour crafting, Int. J. Ind. Syst. Eng., 1, 301

Buswell, 2008, Design, data and process issues for mega-scale rapid manufacturing machines used for construction, Autom. Constr., 17, 923, 10.1016/j.autcon.2008.03.001

Sun, 2020, The influence of extrusion shape/size on the mechanical properties of 3D printed concrete, J. Build. Mater., 23, 1313

Li, 2019, Effect of printing parameters in 3D concrete printing: Printing region and support structures, J. Mater. Process. Technol., 271, 261, 10.1016/j.jmatprotec.2019.04.007

Wolfs, 2018, Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing, Cem. Concr. Res., 106, 103, 10.1016/j.cemconres.2018.02.001

Zareiyan, 2017, Interlayer adhesion and strength of structures in Contour Crafting-Effects of aggregate size, extrusion rate, and layer thickness, Autom. Constr., 81, 112, 10.1016/j.autcon.2017.06.013

Tay, 2016, Processing and properties of construction materials for 3D printing, Materials Science Forum, Volume 861, 177, 10.4028/www.scientific.net/MSF.861.177

Kruger, 2020, 3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse, Compos. Part B Eng., 183, 107660, 10.1016/j.compositesb.2019.107660

Nerella, V.N., Krause, M., Nther, M., and Mechtecherine, V. (2016, January 2–3). Studyingprintability of fresh concrete for formwork free Concrete on-site3D Printing technology (CONPrint3D). Proceedings of the 25th Conference on Rheology of Building Materials, Regensburg, Germany.

Wolfs, 2019, Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion, Cem. Concr. Res., 119, 132, 10.1016/j.cemconres.2019.02.017

Paul, 2018, A review of 3D concrete printing systems and materials properties: Current status and future research prospects, Rapid Prototyp. J., 24, 784, 10.1108/RPJ-09-2016-0154

Nadiyapara, 2017, A review of variable slicing in fused deposition modeling, J. Inst. Eng., 98, 387

Kim, 2018, Effect of fabrication parameters on surface roughness of FDM parts, Int. J. Precis. Eng. Manuf., 19, 137, 10.1007/s12541-018-0016-0

Li, 2019, Optimization of process parameters of coaxial filling method for FDM rapid prototyping, J. Inn. Mong. Univ. Sci. Technol., 38, 205