Output only modal identification and structural damage detection using time frequency & wavelet techniques
Tóm tắt
Từ khóa
Tài liệu tham khảo
Addison P, Watson JN and Feng T (2002), “Lowoscillation Complex Wavelets,” Journal of Sound and Vibration, 254(4): 733–762.
Agneni A and Balis-Cerma L (1989), “Damping Measurements from Truncated Signals via the Hilbert Transform,” Mechanical Systems and Signal Processing, 3(1): 1–3.
Al-Khalidy A, Noori M, Hou Z and Carmona R, “Yamamoto S, Masuda A and Sone A (1997), A Study of Health Monitoring Systems of Linear Structures Using Wavelet Analysis,” Approx Methods in the Design and Analysis of Pressure Vessels and Piping Components, ASME PVP, 347: 49–58.
Basu B (2005), “Identification of Stiffness Degradation in Structures Using Wavelet Analysis,” Construction and Building Materials, 19: 713–721.
Basu B (2007), “Assessment of Structural Integrity via Wavelet Based Time-frequency Analysis of Vibration Signals,” International Journal of Materials and Structural Integrity, 1: 238–258.
Basu B and Gupta VK (1997), “Non-stationary Seismic Response of MDOF Systems by Wavelet Modelling of Non-stationary Processes,” Earthquake Engineering Structural Dynamics, 26: 1243–1258.
Basu B and Gupta VK (1998), “Seismic Response of SDOF Systems by Wavelet Modelling of Nonstationary Processes,” Journal of Engineering Mechaics, ASCE, 124(10): 1142–1150.
Basu B and Gupta VK (1999a), “On Equivalent Linearization Using Wavelet Transform,” Journal of Vibration and Acoustics, ASME, 121(4): 429–432.
Basu B and Gupta VK (1999b), “Wavelet Based Analysis of the Non-stationary Response of a Slipping Foundation,” Journal of Sound and Vibration, 222(4): 547–563.
Basu B and Nagarajaiah S (2008), “A Wavelet-based Time-varying Adaptive LQR Algorithm for Structural Control,” Engineering Structures, Published on line March.
Basu B, Nagarajaiah S and Chakraborty A (2008), “Online Identification of Linear Time-varying Stiffness of Structural Systems by Wavelet Analysis,” International Journal of Structural Health Monitoring, 7(1): 21–36.
Chakraborty A, Basu B and Mitra M (2006), “Identification of Modal Parameters of a Mdof System by Modified L-P Wavelet Packets,” Journal of Sound and Vibration, 295(3–5): 827–837.
Chang CC and Chen LW (2003), “Vibration Damage Detection of a Timoshenko Beam by Spatial Wavelet Based Approach,” Applied Acoustics, 64: 1217–1240.
Chen B and Nagarajaiah S (2007), “Linear Matrix Inequality Based Robust Fault Detection and Isolation Using the Eigenstructure Assignment Method,” Journal of Guidance Control and Dynamics, AIAA, 30(6): 1831–1835.
Chen B and Nagarajaiah S (2008a), “H −/H ∞ Structural Damage Detection Filter Design Using Iterative LMI Approach,” Smart Materials and Structures, 17(3): Art. No. 035019.
Chen B and Nagarajaiah S (2008b), “Structural Damage Detection Using Decentralized Controller Design Method,” Smart Structures and Systems, 4(6): 779–794.
Cohen L (1995), Time-frequency Analysis, New Jersey: V Prentice -Hall.
Dharap P, Koh BH and Nagarajaiah S (2006), “Structural Health Monitoring Using ARMarkov Observers,” Journal of Intelligent Material Systems and Structures, 17(6): 469–481.
Feldman M (1994a), “Non-linear System Vibration Analysis Using Hilbert Transform — I. Free Vibration Analysis Method “FREEVIB”,” Mechanical Systems and Signal Processing, 8(2): 119–127.
Feldman M (1994b), “Non-linear System Vibration Analysis Using Hilbert Transform-II. Forced Vibration Analysis Method “ForceVib”,” Mechanical Systems and Signal Processing, 8(3): 309–318.
Gentile A and Messina A (2003), “On the Continuous Wavelet Transforms Applied to Discrete Vibrational Data for Detecting Open Cracks in Damaged Beams,” International Journal of Solids and Structures, 40: 295–315.
Ghanem R and Romeo F (2000), “A Wavelet Based Approach for the Identification of Linear Time-varying Dynamical Systems,” Journal of Sound and Vibration, 4: 555–576.
Ghanem R and Romeo F (2001), “A Wavelet Based Approach for Model and Parameter Identification of Nonlinear Systems,” International Journal of Nonlinear Mechanics, 5: 835–859.
Goggins J, Broderck BM, Basu B and Elghazouli AY (2006), “Investigation of Seismic Response of Braced Frames Using Wavelet Analysis,” Structural Control and Health Monitoring, (in press, available online).
Gurley K and Kareem A (1999), “Applications of Wavelet Transforms in Earthquake, Wind and Ocean Engineering,” Engineering structures, 21(2): 149–167.
Hou Z, Nouri M and Amand R St (2000), “Wavelet Based Approach for Structural Damage Detection, ASCE, Journal of Engineering Mechanics, July 677–683.
Huang EN, Shen Z, Long RS, Wu CM, Shih HH, Zheng Q, Yen N, Tung CC and Liu HH (1998), “The Empirical Mode Decomposition and the Hilbert Spectrum for Nonlinear and Non-stationary Time Series Analysis,” Proc. Royal Soc. London, 454: 903–995.
Ibrahim SR (1977), “Random Decrement Technique for Modal Identification of Structures,” Journal of Spacecraft and Rockets, 14(11): 696–700.
Kijewski T and Kareem A (2003), “Wavelet Transforms for System Identification in Civil Engineering,” Computer-aided Civil and Infracstructure Engineering, 18(5): 339–355.
Kijewski-Correa T and Kareem A (2006), “Efficacy of Hilbert and Wavelet Transforms for Time-frequency Analysis,” Journal of engineering mechanics, ASCE, 132(10): 1037–1049.
Kijewski-Correa T and Kareem A (2007), “Performance of Wavelet Transform and Empirical Mode Decomposition in Extracting Signals Embedded in Noise,” Journal of engineering mechanics, ASCE, 133(7): 849–852.
Kitada Y (1998), “Identification of Nonlinear Structural Dynamic System Using Wavelet,” Journal of Engineering Mechanics, ASCE, 124(10): 1059–1066.
Koh BH, Dharap P and Nagarajaiah S (2005a), “Phan MQ. Real Time Structural Damage Monitoring by Input Error Function,” AIAA Journal, 43(8): 1808–1814.
Koh BH, Li Z, Dharap P, Nagarajaiah S and Phan MQ (2005b), “Actuator Failure Detection through Interaction Matrix Formulation,” Journal of Guidance Control and Dynamics, AIAA, 28(5): 895–901.
Koh BH, Nagarajaiah S and Phan MQ (2008), “Direct Identification of Structural Damage Through Kronecker Product Method,” Journal of Mechanical Science and Technology, 22(01): 103–112.
Kyprianou A and Staszewski WJ (1999), “On the Cross Wavelet Analysis of the Duffing Oscillator,” Journal of Sound and Vibration, 228(1): 119–210.
Lardies J and Gouttebroze S (2000), “Identification of Modal Parameters Using the Wavelet Transform,” International Journal of Mechanical Science, 44: 2263–2283.
Li Z, Koh BH and Nagarajaiah S (2007), “Detecting Sensor Failure via Decoupled Error Function and Inverse Input-output Model,” Journal of Engineering Mechanics, ASCE, 133(11): 1222–1228.
Liew KM and Wang Q (1998), “Application of Wavelet Theory for Crack Identification in Structures,” Amer. Soc. Civ. Eng, J. Eng. Mech., 124(2): 152–157.
Loutridis S, Douka E and Trochidis A (2004), “Crack Identification in Double Cracked Beams Using Wavelet Analysis,” Journal of Sound and Vibration, 277: 1025–1039.
Melhem H and Kim H (2003), “Damage Detection in Concrete by Fourier and Wavelet Analysis,” Amer. Soc. Civ. Eng, J. Eng. Mech., 129(5) 571–577.
Nagarajaiah S (2009), “Adaptive Passive, Semiactive, Smart Tuned Mass Dampers: Identification and Control Using Empirical Mode Decomposition, Hilbert Transform, and Short-term Fourier Transform,” Structural Control and Health Monitoring, DOI: 10.1002 stc.349.
Nagarajaiah S and Dharap P (2003), “Reduced Order Observer Based Identification of Base Isolated Buildings,” Earthquake Engineering and Engineering Vibration, 2(2): 237–244.
Nagarajaiah S and Li Z (2004), “Time Segmented Least Squares Identification of Base Isolated Buildings,” Soil Dynamics and Earthquake Engineering Journal, 24, 577–586.
Nagarajaiah S and Sonmez E (2007), “Structures of Semiactive Variable Stiffness Multiple Tuned Mass Dampers Under Harmonic Forces,” Journal of Sructural Engineering, ASCE, 133(1): 67–77.
Nagarajaiah S and Varadarajan N (2001), “Semiactive Control of Smart Tuned Mass Damper Using Empirical Mode Decomposition and Hilbert Transform Algorithm,” Proc. ICOSSAR 2001, Newport Beach, CA, June, CD ROM 2001.
Nagarajaiah S and Varadarajan N (2005), “Semiactive Control of Wind Excited Building with Variable Stiffness TMD Using Short Time Fourier Transform,” Engineering Structures, 27(3): 431–441.
Nagarajaiah S, Vardarajan N and Sahasrabudhe S (1999), “Variable Stiffness and Instantaneous Frequency,” Proc. Structures Congress, ASCE, New Orleans, pp. 858–861.
Naldi G and Venini P (1997), “Wavelet Analysis of Structures: Statics, Dynamics and Damage Identification,” Meccanica, 32.
Narasimhan S and Nagarajaiah S (2005), “STFT Algorithm for Semiactive Control of Base Isolated Buildings with Variable Stiffness Isolation Systems Subjected to Near Fault Earthquakes,” Engineering structures, 27(4):514–523.
Newland DE (1993), An Introduction to Random Vibrations, Spectral and Wavelet Analysis, Longman, U.K.
Newland DE (1994a), “Wavelet Analysis of Vibration, Part1: Theory,” Trans. ASME Journal of Vibration and Acoustics, 116: 409–416.
Newland DE (1994b), “Wavelet Analysis of Vibration, Part2: Wavelet Maps,” Trans. ASME Journal of Vibration and Acoustics, 116: 417–425.
Okafor AC and Dutta A (2000), “Structural Damage Detection in Beams by Wavelet Transforms,” Smart Materials and Structures, 9: 906–917.
Pakrashi V, Basu B, and O’Connor A (2007), “Structural Damage Detection and Calibration Using Wavelet-Kurtosis Technique,” Engineering Structures, (in press).
Patsias S and Staszewski WJ (2002), “Damage Detection Using Optical Measurements and Wavelets,” Structural Health Monitoring, 1(1): 5–22.
Patsias S, Staszewski WJ and Tomlinson GR (2002), “Image Sequences and Wavelets for Vibration Analysis. Part II - Extraction of Modal Damping and Modeshapes,” Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 216(9): 901–912.
Piombo BAD and Fasana A, Marchesiello S and Ruzzene M (2000), “Modelling and Identification of the Dynamic Response of a Supported Bridge,” Mechanical Systems and Signal Processing, 14(1): 75–89.
Rilling G, Flandrin P and Goncalves P (2003), “On Empirical Mode Decomposition and Its Algorithms,” IEEE-EURASIP Workshop on Nonlinear Signal and Image Processing, NSIP-03, Grado I.
Robertson A and Basu B (2008), “Wavelet Analysis,” editors Boller C, Chang FK and Fujino Y, Encyclopaedia on Structural Health Monitoring, Wiley.
Robertson AN, Park KC and Alvin KF (1998), “Extraction of Impulse Response Data via Wavelet Transform for Structural System Identification,” J. Vib Acoustics, ASME, 120: 252–260.
Rucka M and Wilde K (2006), “Crack Identification Using Wavelets on Experimental Static Deflection Profiles,” Engineering Structures, 28: 279–288.
Ruzzene M, Fasana A, Garibaldi L and Piombo BAD (2000), “Natural Frequencies and Damping Identification Using Wavelet Transform: Application to Real Data,” Mechanical Systems and Signal Processing, 11: 207–218.
Spanos PD, Failla G, Santini A and Pappatico M (2006), “Damage Detection in Euler-bernoulli Beam via Spatial Wavelet Analysis,” Structural Control and Health Monitoring, 13: 472–487.
Spencer B and Nagarajaiah S (2003), “State of the Art of Structural Control,” Journal of Structural Engineering, ASCE, 129(7): 845–856.
Staszewski WJ (1997), “Identification of Damping in MDOF Systems Using Time Scale Decomposition,” Journal of Sound and Vibration, 203: 283–305.
Staszewski WJ (1998a), “Identification of Non-linear Systems Using Multi-scale Ridges and Skeletons of the Wavelet Transform,” Journal of Sound and Vibration, 214(4): 639–658.
Staszewski WJ (1998b), “Structural and Mechanical Damage Detection Using Wavelets,” The Shock and Vibration Digest, 30(4): 457–472.
Staszewski WJ, Biemans C, Boller C and Tomlinson GR (1998), “Damage Detection Using Wavelet-based Statistical Analysis,” Proc of ISMA23, I: 59–66.
Staszewski WJ and Robertson AN (2007), “Timefrequency and Time-scale Analysis for Structural Health Monitoring,” Philosophical Transactions of the Royal Society, Part A, 365(1851): 449–477.
Staszewski WJ and Tomlinson GR (1994), “Application of the Wavelet Transform to Fault Detection in a Spur gear,” Mechanical Systems and Signal Processing, 8: 289–307.
Thrane N (1984), “The Hilbert transform,” Bruel & Kjaer Technical Review, 3.
Tomlinson GR (1987), “Developments in the Use of the Hilbert Transform for Detecting and Quantifying Non-Linearity Associated with Frequency Response Functions,” Mechanical Systems and Signal Processing, 1(2): 151–171.
Varadarajan N and Nagarajaiah S (2004), “Wind Response Control of Building with Variable Stiffness Tuned Mass Damper Using EMD/HT,” Journal of Engineering Mechanics, ASCE, 130(4): 451–458.
Wang Q and Deng X (1999), “Damage Detection with Spatial Wavelets,” International Journal of Solids and Structures, 36: 3443–3468.
Wang WJ and McFadden PD (1996), “Application of Wavelets to Gearbox Vibration Signals for Fault Detection,” Journal of Sound and Vibration, 192: 927–939.
Worden K and Tomlinson GR (2001), Nonlinearity in Structural Dynamics, Institute of Physics Publishing, Bristol and Philadelphia.
Yang JN, Lei Y, Lin S and Huang N (2004), Hilberthaung Based Apporach for Structural Damage Detection,” Journal of Engineering Mechanics, 130(1): 85–95.
Yang JN, Lei Y, Pan S and Huang N (2003), System Identification of Linear Structures Based on Hilbert-Haung Spectral Analysis. Part I: Normal Modes,” Earthquake Engineering & Structural Dyanmics, 32: 1443–1467.