Out-of-plane behaviour of infill masonry panels strengthened with composite materials
Tóm tắt
The performance of various composite materials applied to strengthen hollow masonry panels under out-of-plane actions is compared here. The strengthening solutions belong to three reinforcement Externally Bonded (EB) wet lay-up systems: (i) bidirectional composite meshes applied with inorganic matrices, i.e., Textile Reinforced Mortars (TRM); unidirectional composite textiles applied with (ii) inorganic matrices, i.e., Steel Reinforced Grouts (SRG), or (iii) organic (epoxy) matrices, i.e., Fibre Reinforced Polymers (FRP), Steel Reinforced Polymers (SRP) and Natural FRPs. Carbon FRP, flax and hemp NFRP, and basalt and glass-based TRM were examined. As inorganic matrix, a cement-based mortar was used for TRMs; in the case of SRGs, comparisons with a magnesia-based matrix were also carried out. Twenty-seven specimens were subjected to simplified four-point monotonic bending tests, aimed at reproducing in the laboratory the failure condition of infill masonry walls under out-of-plane actions. The results are compared in terms of failure mode and mechanical improvement, and provide an analytical evaluation of moment–curvature behaviour according to bilinear laws.
Tài liệu tham khảo
Reluis (2009) Linee guida per riparazione e rafforzamento di elementi strutturali, tamponature e partizioni. In: Dolce M, Manfredi G (eds) Rete dei Laboratori Universitari di Ingegneria Sismica
Braga F, Manfredi V, Masi A, Salvatori A, Vona M (2011) Performance of non-structural elements in RC buildings during the L’Aquila, 2009 earthquake. Bull Earthq Eng 9:307–324
Verlato N, Guidi G, da Porto F (2014) Experimental testing and numerical modelling of infill masonry walls subjected to in-plane damage. In: Proceedings of the 9th international masonry conference, Guimaraes, Portugal (CD-ROM)
Hak S, Morandi P, Magenes G, Sullivan TJ (2012) Damage control for clay masonry infills in the design of RC frame structures. J Earthq Eng 16:1–35
da Porto F, Guidi G, Dalla Benetta M, Verlato N (2013) Combined in-plane/out-of-plane experimental behaviour of reinforced and strengthened infill masonry walls. In: Proceedings of 12th Canadian masonry symposium, Vancouver, BC (CD-ROM)
Saatcioglu M, Serrato F, Foo S (2005) Seismic performance of masonry infill walls retrofitted with CFRP sheets. In: Proceedings of 7th international symposium on fiber-reinforced polymer (FRP) reinforcement for concrete structures. ACI, 230(1), pp 341–354
Lunn DS, Rizkalla SH, Maeda S, Ueda T (2012) FRP anchorage systems for infill masonry structures. In: Proceedings of 3rd Asia-Pacific conference on FRP in structures (APFIS 2012), Hokkaido, Japan
El-Dakhakhni W, Hamid A, Elgaaly M (2004) Seismic retrofit of masonry infill walls using advanced composites. In: Proceedings of 13th Conference on Earthquake Engineering, Vancouver, BC
Lunn DS, Rizkalla SH (2011) Strengthening of infill masonry walls with FRP materials. ASCE J Compos Const 15(2):206–214
EN 1998-1 (2004) Eurocode 8—design of structures for earthquake resistance. Part 1: general rules, seismic actions and rules for buildings
EN 1996-1-1 (2005) Eurocode 6—design of masonry structures. Part 1-1: general rules for reinforced and unreinforced masonry structures
Matana M, Nanni A, Dharani L, Silva P, Tunis G (2005) Bond performance of steel reinforced polymer and steel reinforced grout. In: Proceedings of international symposium on bond behaviour of FRP in structures (BBFS 2005), Hong Kong, pp 125–132
Prota A, Marcari G, Fabbrocino G, Manfredi G, Aldea C (2006) Experimental in-plane behaviour of tuff masonry strengthened with cementitious matrix-grid composites. ASCE J Compos Const 10(3):223–233
Papanicolaou CG, Triantafillou TC, Karlos K, Papathanasiou M (2007) Textile-Reinforced Mortar (TRM) versus FRP as strengthening material of URM walls: in-plane cyclic loading. Mater Struct 40:1081–1097
Borri A, Casadei P, Castori G, Hammond J (2009) Strengthening of brick masonry arches with externally bonded steel reinforced composites. ASCE J Compos Const 13(6):468–475
Girardello P, Pappas A, da Porto F, Valluzzi MR (2013) Experimental testing and numerical modelling of masonry vaults. In: Proceedings of international conference on rehabilitation and restoration of structures, Chennai, India, pp 117–127
CNR-DT 200 (2004) Guide for the design and construction of externally bonded FRP systems for strengthening existing structures. Italian Research Council, Italy
ACI 440M Guide Draft-1 (2004) Guide for the design and construction of externally bonded FRP system for strengthening unreinforced masonry structures. ACI Committee 440. American Concrete Institute, Farmington Hills
Triantafillou TC (1998) Strengthening of masonry structures using epoxy-bonded FRP laminates. ASCE J Compos Const 2(2):96–104
Gilstrap JM, Dolan CW (1998) Out-of-plane bending of FRP-reinforced masonry walls. Compos Sci Technol 58:1277–1284
Hamoush SA, McGinley MW, Mlakar P, Scott D, Murray K (2001) Out-of-plane strengthening of masonry walls with reinforced composites. ASCE J Compos Const 5(3):139–145
Galati N, Secondin S, Tumialan GJ, Nanni A (2003) Out-of-plane behaviour of URM walls strengthened with FRP bars. In: Proceedings of structural faults & repair 2003, UK (CD-ROM)
Tan KH, Patoary MKH (2004) Strengthening of masonry walls against out-of-plane loads using fibre-reinforced polymer reinforcement. ASCE J Compos Const 8:79–87
Turco V, Secondin S, Morbin A, Valluzzi MR, Modena C (2006) Flexural and shear strengthening of un-reinforced masonry with FRP bars. Compos Sci Technol 66(2):289–296
Karantoni FV, Fardis MN (1992) Effectiveness of seismic strengthening techniques for masonry buildings. ASCE J Compos Const 118(7):1884–1902
ElGawady MA, Lestuzzi P, Badoux M (2006) Retrofitting of masonry walls using shotcrete. In: Proceedings of NZSEE 2006 conference, New Zealand
Papanicolaou CG, Triantafillou TC, Papathanasiou M, Karlos K (2007) Textile Reinforced Mortar (TRM) versus FRP as strengthening material of URM walls: out-of-plane cyclic loading. RILEM Mater Struct 41(1):143–157
Harajli M, ElKhatib H, San-Jose J (2010) Static and cyclic out-of-plane response of masonry walls strengthened using textile-mortar system. J Mater Civ Eng 22(11):1171–1180
Papanicolaou CG, Triantafillou TC, Lekka M (2011) Externally bonded grids as strengthening and seismic retrofitting materials of masonry panels. Constr Build Mater 25:504–514
EN 772-1 (2002) Methods of test for masonry units. Determination of compressive strength
UNI 1015-11 (2007) Metodi di prova per malte per opere murarie. Determinazione della resistenza a flessione e a compressione della malta indurita
UNI EN 998-2 (2010) Specifiche per malte per opere murarie. Malte da muratura
UNI 6556 (1976) Prove sui calcestruzzi. Determinazione del modulo elastico secante a compressione
UNI 1052-1 (2001) Metodi di prova per muratura. Determinazione della resistenza a compressione
Larrinaga P, Chastre C, San-José JT, Garmendia L (2013) Non-linear analytical model of composites based on basalt textile reinforced mortar under uniaxial tension. Composites B 55:518–527
de Felice G, De Santis S, Garmendia L, Ghiassi B, Larrinaga P, Lourenço P, Oliveira D, Paolacci F, Papanicolau CG (2014) Mortar-based systems for externally-bonded strengthening of masonry. Mater Struct. doi:10.1617/s11527-014-0360-1