Optimum design of Tuned Mass Dampers by displacement and energy perspectives

Ormondroyd, 1928, The theory of the vibration absorber, Transactions of the American Society of Mechanical Engineers, 49, A9 Crandall, 1973 Rana, 1998, Parametric study and simplified design of tuned mass dampers, Engineering Structures, 20, 193, 10.1016/S0141-0296(97)00078-3 Warburton, 1980, Optimum absorber parameters for simple systems, Earthquake Engineering and Structural Dynamics, 8, 197, 10.1002/eqe.4290080302 Clark AJ. Multiple passive TMDs for reducing earthquake induced building motion. In: Proceedings of ninth world conference on earthquake engineering, Tokyo, Kyoto, Japan, vol. 5, (1988). Sun, 1995, Passive, adaptive and active tuned vibration absorbers—a survey, Transactions of ASME, 117, 234, 10.1115/1.2836462 Soong, 1993 Fahim, 1997, A method of estimating the parameters of tuned mass dampers for seismic applications, Earthquake Engineering and Structural Dynamics, 26, 617, 10.1002/(SICI)1096-9845(199706)26:6<617::AID-EQE664>3.0.CO;2-Z Shimazu T, Araki H. Survey of actual effectiveness of mass damper systems installed in buildings. In: Proceedings of the eleventh world conference on earthquake engineering, Acapulco, 1996, paper no. 809. Li, 2002, Design for optimally minimizing fatigue damage, Journal of Engineering Mechanics, 128, 703, 10.1061/(ASCE)0733-9399(2002)128:6(703) Marano, 2010, A comparison between different optimization criteria for tuned mass dampers design, Journal of Sound and Vibration, 329, 4880, 10.1016/j.jsv.2010.05.015 Marano, 2011, Optimization criteria for tuned mass dampers for structural vibration control under stochastic excitation, Journal of Vibration and Control, 17, 679, 10.1177/1077546310365988 Wong, 2004, Energy dissipation of tuned mass dampers during earthquake excitations, The Structural Design of Tall and Special Buildings, 13, 105, 10.1002/tal.244 Wong, 2008, Seismic energy dissipation of inelastic structures with tuned mass dampers, Journal of Engineering Mechanics, 134, 163, 10.1061/(ASCE)0733-9399(2008)134:2(163) Pellicano, 2009, Vibration reduction on beams subjected to moving loads using linear and nonlinear dynamic absorbers, Journal of Sound and Vibration, 325, 742, 10.1016/j.jsv.2009.04.011 Wong, 2009, Seismic energy dissipation of inelastic structures with multiple tuned mass dampers, Journal of Engineering Mechanics—ASCE, 135, 265, 10.1061/(ASCE)0733-9399(2009)135:4(265) Tajimi H. A statistical method of determining the maximum response of a building during earthquake, In: Proceedings of the 2nd world conference on earthquake engineering, Tokyo, Japan, (1960). Lin, 1976 Soong, 1997 Villaverde, 1985, Reduction in seismic response with heavily-damped vibration absorbers, Earthquake Engineering and Structural Dynamics, 13, 33, 10.1002/eqe.4290130105 Villaverde, 1993, Damped resonant appendages to increase inherent damping in buildings, Earthquake Engineering and Structural Dynamics, 22, 491, 10.1002/eqe.4290220603 Villaverde R. Seismic control of structures with damped resonant appendage. In: Proceedings of the 9th world conference of structural control, Los Angeles, CA, USA, (1994). Sadek, 1997, A method of estimating the parameters of tuned mass dampers for seismic application, Earthquake Engineering and Structural Dynamics, 26, 617, 10.1002/(SICI)1096-9845(199706)26:6<617::AID-EQE664>3.0.CO;2-Z Holland, 1975 Goldberg, 1989 Marano, 2007, Constrained reliability based optimization of linear tuned mass dampers for seismic control, International Journal of Solids and Structures, 44, 7370, 10.1016/j.ijsolstr.2007.04.012