Optimization of transformer oil blended with natural ester oils using Taguchi-based grey relational analysis
Tóm tắt
Từ khóa
Tài liệu tham khảo
Fofana, 2013, 50 years in the development of insulating liquids, IEEE Electr Insul Mag, 29, 13, 10.1109/MEI.2013.6585853
Dhanalakshmi, 2020, A comprehensive MCDM-based approach using TOPSIS and EDAS as an auxiliary tool for pyrolysis material selection and its application, Biomass Convers Biorefin, 1–16
Madavan, 2017, Comparison of antioxidant influence on mineral oil and natural ester properties under accelerated aging conditions, IEEE Trans Dielect Electr Insul, 24, 2800, 10.1109/TDEI.2017.006527
Madavan, 2017, Investigation on effects of different types of nanoparticles on critical parameters of nano-liquid insulation systems, J Mol Liq, 230, 437, 10.1016/j.molliq.2017.01.057
Madavan, 2018, A comparative investigation on effects of nanoparticles on characteristics of natural esters-based nanofluids, Colloids Surf A, 556, 30, 10.1016/j.colsurfa.2018.08.014
McShane, C. P. (2002). Vegetable-oil-based dielectric coolants.IEEE Industry Applications Magazine,8(3), 34-41.
K, 2021, Performance and emission characteristics of diesel engine fueled with ternary blends of linseed and rubber seed oil biodiesel, Fuel, 285, 119255, 10.1016/j.fuel.2020.119255
Singha, 2014, Comparative aging characteristics between a high oleic natural ester dielectric liquid and mineral oil, IEEE Trans Dielect Electr Insul, 21, 149, 10.1109/TDEI.2013.003713
Pasupathi, 2020, Characterization of Hybrid-nano/Paraffin Organic Phase Change Material for Thermal Energy Storage Applications in Solar Thermal Systems, Energies, 13, 5079, 10.3390/en13195079
Carcedo, 2015, Aging assessment of dielectric vegetable oils, IEEE Electr Insul Mag, 31, 13, 10.1109/MEI.2015.7303258
Wilhelm, 2011, Aging markers for in-service natural ester-based insulating fluids, IEEE Trans Dielect Electr Insul, 18, 714, 10.1109/TDEI.2011.5931057
Rao, 2016, Oxidation stability enhancement of a blend of mineral and synthetic ester oils, IEEE Electr Insul Mag, 32, 43, 10.1109/MEI.2016.7414230
Martin, R., Athanassatou, H., Duart, J. C., Perrier, C., Sitar, I., Walker, J., ... & DE, H. J. (2010). Experiences in service with new insulating liquids. InCigre Working Group A2–35.
Fofana, 2002, Challenge of mixed insulating liquids for use in high-voltage transformers.1. Investigation of mixed liquids, IEEE Electr Insul Mag, 18, 18, 10.1109/MEI.2002.1014964
Ramanan, 2020, Performance evaluation of building-integrated photovoltaic systems for residential buildings in southern India, Build Serv Eng Res Technol, 41, 492, 10.1177/0143624419881740
Perrier, 2006, Improvement of power transformers by using mixtures of mineral oil with synthetic esters, IEEE Trans Dielect Electr Insul, 13, 556, 10.1109/TDEI.2006.1657968
Hamdi, A., Fofana, I., & Djillali, M. (2017). Stability of mineral oil and oil–ester mixtures under thermal ageing and electrical discharges.IET Generation, Transmission & Distribution,11(9), 2384-2392.
Liao, R., Hao, J., Yang, L., & Grzybowski, S. (2011, June). Study on aging characteristics of mineral oil/natural ester mixtures-paper insulation. In2011 IEEE International Conference on Dielectric Liquids(pp. 1-4). IEEE.
Pichandi, R., Murugavel Kulandaivelu, K., Alagar, K., Dhevaguru, H. K., & Ganesamoorthy, S. (2020). Performance enhancement of photovoltaic module by integrating eutectic inorganic phase change material.Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-18.
STANDARD, B. (1995). Insulating liquids—Determination of the breakdown voltage at power frequency—Test method.
IEC 62021-1, Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration, 2003.
ASTM D92, (2012), Standard Test Methods for Flash Point and Fire Point by Pensky-Martens Closed Cup Tester.
ASTM D445 – 17a, (2011), Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.
Sedighi, 2020, Life estimation of distribution transformers using thermography: A case study, Measurement, 149, 106994, 10.1016/j.measurement.2019.106994
Guo, Y., Wang, Q., Zhang, D., Yu, D., & Yu, J. (2018). A Stochastic-Process-Based Method for Assessing Frequency Regulation Ability of Power Systems with Wind Power Fluctuations.Journal of Environmental Informatics,32(1).
Rao, 2019, Measurement of transformer solid insulation degradation using dilatometry and X-ray diffraction analysis, Measurement, 131, 701, 10.1016/j.measurement.2018.09.024
Abu-Siada, 2015, A new fuzzy logic approach to identify power transformer criticality using dissolved gas-in-oil analysis, Int J Electr Power Energy Syst, 67, 401, 10.1016/j.ijepes.2014.12.017
Hao, 2007, Artificial Immune Network Classification Algorithm for Fault Diagnosis of Power Transformer, IEEE Trans Power Delivery, 22, 930, 10.1109/TPWRD.2007.893182
Li, 2018, An inexact credibility chance-constrained integer programming for greenhouse gas mitigation management in regional electric power system under uncertainty, J Environ Inform, 31, 111
Bacha, 2012, Power transformer fault diagnosis based on dissolved gas analysis by support vector machine, Electr Power Syst Res, 83, 73, 10.1016/j.epsr.2011.09.012
Zheng, 2018, A novel model based on wavelet LS-SVM integrated improved PSO algorithm for forecasting of dissolved gas contents in power transformers, Electr Power Syst Res, 155, 196, 10.1016/j.epsr.2017.10.010
Chen, 2018, A Generalized Model for Wind Turbine Faulty Condition Detection Using Combination Prediction Approach and Information Entropy, J ENV INFORM, 10.3808/jei.201800393
Saha, 2004, Investigation of polarization and depolarization current measurements for the assessment of oil-paper insulation of aged transformers, IEEE Trans Dielect Electr Insul, 11, 144, 10.1109/TDEI.2004.1266329
Lin, 2018, Detection of the sensitive inflowing river indicators related to non-point source organic pollution: a case study of Taihu Lake, J Environ Inf, 32, 98
Wei, 2011, Novel characteristic parameters for oil-paper insulation assessment from differential time-domain spectroscopy based on polarization and depolarization current measurement, IEEE Trans Dielect Electr Insul, 18, 1918, 10.1109/TDEI.2011.6118630
Lin, 2009, Grey clustering analysis for incipient fault diagnosis in oil-immersed transformers, Expert Syst Appl, 36, 1371, 10.1016/j.eswa.2007.11.019
J. Shen, G. Huang, C. An, Y. Yao X. Xin, S. Rosendahl, Immobilization of TBBPA on Pyrogenic Carbon subjected to Natural Organic Matters and Freeze-Thawing Conditions: Insight into Surface Functionalization, Coverage Process and Binding Affinity.
Karthick, A., Murugavel, K. K., & Prabhakaran, D. S. R. (2017, March). Energy analysis of building integrated photovoltaic modules. In2017 International conference on power and embedded drive control (ICPEDC)(pp. 307-311). IEEE.
Xie, 2009, Discrete grey forecasting model and its optimization, Appl Math Model, 33, 1173, 10.1016/j.apm.2008.01.011
Wei, 2010, GRA method for multiple attribute decision making with incomplete weight information in intuitionistic fuzzy setting, Knowl-Based Syst, 23, 243, 10.1016/j.knosys.2010.01.003
Wei, 2011, Gray relational analysis method for intuitionistic fuzzy multiple attribute decision making, Expert Syst Appl, 38, 11671, 10.1016/j.eswa.2011.03.048
Shivam, 2019, Index-based study of future precipitation changes over subansiri river catchment under changing climate, J. Environ. Inf, 34, 1
Berenbaum, D., Deighan, D., Marlow, T., Lee, A., Frickel, S., & Howison, M. (2016). Mining Spatio-temporal Data on Industrialization from Historical Registries.arXiv preprint arXiv:1612.00992.
Hariharasakthisudhan, P., Moshi, A. A. M., Bharathi, S. S., & Logesh, K. (2019). Regression and Grey relational analysis on friction and wear behavior of AA6061/Al2O3/Si3N4/graphite hybrid nano composites.Materials Research Express,6(8), 085017.
Sundara Bharathi, S. R., Ravindran, D., & Moshi, A. A. M. (2020). MULTI RESPONSE OPTIMIZATION OF CNC TURNING PARAMETERS ON AUSTENITIC STAINLESS STEEL 303 USING TAGUCHI BASED GREY RELATIONAL ANALYSIS.Transactions of the Canadian Society for Mechanical Engineering, (ja). DOI: https://doi.org/10.1139/tcsme-2019-0254.
S.Arulselvan, D.Ravindran, A.Arul Marcel Moshi and D.Prince, “Optimization of Surface Roughness, Material Removal Rate and Taper Error for Wirecut Electrical Discharge Machined taper parts of inconel 825 alloy”, Journal of the Balkan Tribological Association, Vol. 25, No.4, pp.1028−1037, 2019.
Chang, 2001, Modelling of job-shop scheduling with multiple quantitative and qualitative objectives and a GA/TS mixture approach, Int J Comput Integr Manuf, 14, 367, 10.1080/0951120010020749
Tyagi, 1997, A methodology for cost versus service trade-offs in wholesale location-distribution using mathematical programming and analytic hierarchy process, J. Bus. Log., 18, 77
Chan, F. T., Chung, S. H., & Wadhwa, S. (2004). A heuristic methodology for order distribution in a demand driven collaborative supply chain.International Journal of Production Research,42(1), 1-19.
Wang, 1996, Grey relational analysis of correlation of errors in measurement, J. Grey Syst., 8, 73
Lin, C. L. (2004). Use of the Taguchi method and grey relational analysis to optimize turning operations with multiple performance characteristics.Materials and manufacturing processes,19(2), 209-220.
Ghani, S. A., Noorden, Z. A., Muhamad, N. A., Zainuddin, H., Chua Abdullah, M. I. H., & Chairul, I. S. (2017). Dielectric Strength Improvement of Natural Ester Insulation Oil via Mixed Antioxidants: Taguchi Approach.International Journal of Electrical & Computer Engineering (2088-8708),7(2).
Tseng, 2009, A causal and effect decision making model of service quality expectation using grey-fuzzy DEMATEL approach, Expert Syst Appl, 36, 7738, 10.1016/j.eswa.2008.09.011
Zhai, 2009, Design concept evaluation in product development using rough sets and grey relation analysis, Expert Syst Appl, 36, 7072, 10.1016/j.eswa.2008.08.068
Malek, A., Ebrahimnejad, S., & Tavakkoli-Moghaddam, R. (2017). An improved hybrid grey relational analysis approach for green resilient supply chain network assessment.Sustainability,9(8), 1433.