Optimization of the integrated ORC and carbon capture units coupled to the refinery furnace with the RSM-BBD method

Hasan, 2015, A multi-scale framework for CO2 capture, utilization, and sequestration: CCUS and CCU, Comput. Chem. Eng., 81, 2, 10.1016/j.compchemeng.2015.04.034 Ekanayake, 2021, Power-to-decarbonization: mesoporous carbon-MgO nanohybrid derived from plasma-activated seawater salt-loaded biomass for efficient CO2 capture, J. CO2 Util., 53, 10.1016/j.jcou.2021.101711 Amiri, 2017, Optimization of CO2 capture process from simulated flue gas by dry regenerable alkali metal carbonate based adsorbent using response surface methodology, Energy Fuels, 31, 5286, 10.1021/acs.energyfuels.6b03303 Ghiat, 2021, A review of carbon capture and utilisation as a CO2 abatement opportunity within the EWF nexus, J. CO2 Util., 45, 10.1016/j.jcou.2020.101432 Wang, 2015, Payback period estimation and parameter optimization of subcritical organic Rankine cycle system for waste heat recovery, Energy, 88, 10.1016/j.energy.2015.05.095 Liang, 2015, A review and selection of engine waste heat recovery technologies using analytic hierarchy process and grey relational analysis, Int. J. Energy Res., 39, 10.1002/er.3242 Wang, 2017, Experimental investigation on the performance of ORC power system using zeotropic mixture R601a/R600a, Int. J. Energy Res., 41, 10.1002/er.3664 Leveni, 2021, Energy, exergy, and cost comparison of Goswami cycle and cascade organic Rankine cycle/absorption chiller system for geothermal application, Energy Convers. Manag., 227, 10.1016/j.enconman.2020.113598 Wang, 2022, Multi-objective optimization and fluid selection of organic Rankine cycle (ORC) system based on economic-environmental-sustainable analysis, Energy Convers. Manag., 254, 10.1016/j.enconman.2022.115238 Behzadi, 2018, Multi-objective optimization and exergoeconomic analysis of waste heat recovery from Tehran's waste-to-energy plant integrated with an ORC unit, Energy, 160, 10.1016/j.energy.2018.07.074 Jin, 2019, Techno-economic analysis on a new conceptual design of waste heat recovery for boiler exhaust flue gas of coal-fired power plants, Energy Convers. Manag., 200, 10.1016/j.enconman.2019.112097 Safdarnejad, 2015, Plant-level dynamic optimization of cryogenic carbon capture with conventional and renewable power sources, Appl. Energy, 149, 10.1016/j.apenergy.2015.03.100 Ji, 2021, Post-combustion carbon capture for tank to propeller via process modeling and simulation, J. CO2 Util., 51, 10.1016/j.jcou.2021.101655 Talebizadehsardari, 2020, Energy, exergy, economic, exergoeconomic, and exergoenvironmental (5E) analyses of a triple cycle with carbon capture, J. CO2 Util., 41, 10.1016/j.jcou.2020.101258 Sharif, 2021, CO2 capturing from flue gases injected into the NDDCT: feasibility study, exergy and economic investigation of simultaneously MEA-solvent chemical absorption and flue gas injection, Sustain. Energy Technol. Assess., 45 Hosseini-Ardali, 2020, Multi-objective optimization of post combustion CO2 capture using methyldiethanolamine (MDEA) and piperazine (PZ) bi-solvent, Energy, 211, 10.1016/j.energy.2020.119035 Seo, 2020, Catalytic CO2 absorption in an amine solvent using nickel nanoparticles for post-combustion carbon capture, J. CO2 Util., 36, 10.1016/j.jcou.2019.11.011 Bravo, 2021, Optimization of energy requirements for CO2 post-combustion capture process through advanced thermal integration, Fuel, 283, 10.1016/j.fuel.2020.118940 Otitoju, 2021, Technical and economic performance assessment of post-combustion carbon capture using piperazine for large scale natural gas combined cycle power plants through process simulation, Appl. Energy, 292, 10.1016/j.apenergy.2021.116893 Oh, 2020, Techno-economic analysis of advanced stripper configurations for post-combustion CO2 capture amine processes, Energy, 206, 10.1016/j.energy.2020.118164 Dubois, 2018, Comparison of various configurations of the absorption-regeneration process using different solvents for the post-combustion CO2 capture applied to cement plant flue gases, Int. J. Greenh. Gas. Control, 69, 20, 10.1016/j.ijggc.2017.12.004 Sharma, 2015, Highly integrated post‐combustion carbon capture process in a coal‐fired power plant with solar repowering, Int. J. Energy Res., 39, 1623 Nwaoha, 2018, Techno-economic analysis of CO2 capture from a 1.2 million MTPA cement plant using AMP-PZ-MEA blend, Int. J. Greenh. Gas. Control, 78, 10.1016/j.ijggc.2018.07.015 Dash, 2014, Simulation and parametric study of post combustion CO2 capture process using (AMP+ PZ) blended solvent, Int. J. Greenh. Gas. Control, 21, 130, 10.1016/j.ijggc.2013.12.003 Zhang, 2017, Analysis of the reduction of energy cost by using MEA-MDEA-PZ solvent for post-combustion carbon dioxide capture (PCC), Appl. Energy, 205, 10.1016/j.apenergy.2017.08.130 Jung, 2015, New configuration of the CO2 capture process using aqueous monoethanolamine for coal-fired power plants, Ind. Eng. Chem. Res., 54, 3865, 10.1021/ie504784p Zhao, 2017, Enhancing the energetic efficiency of MDEA/PZ-based CO2 capture technology for a 650 MW power plant: process improvement, Appl. Energy, 185, 10.1016/j.apenergy.2016.11.009 Nwaoha, 2018, Process simulation and parametric sensitivity study of CO2 capture from 115 MW coal–fired power plant using MEA–DEA blend, Int. J. Greenh. Gas. Control, 76, 1, 10.1016/j.ijggc.2018.06.006 Abu-Zahra, 2007, CO2 capture from power plants: Part I. A parametric study of the technical performance based on monoethanolamine, Int. J. Greenh. Gas. Control, 1, 37, 10.1016/S1750-5836(06)00007-7 Wang, 2020, Selection principle of working fluid for organic Rankine cycle based on environmental benefits and economic performance, Appl. Therm. Eng., 178, 10.1016/j.applthermaleng.2020.115598 Tchanche, 2011, Low-grade heat conversion into power using organic Rankine cycles – a review of various applications, Renew. Sustain. Energy Rev., 15, 10.1016/j.rser.2011.07.024 Nazerifard, 2021, Design and thermodynamic analysis of a novel methanol, hydrogen, and power trigeneration system based on renewable energy and flue gas carbon dioxide, Energy Convers. Manag., 233, 10.1016/j.enconman.2021.113922 Naveiro, 2022, Thermodynamic and environmental analyses of a novel closed loop regasification system integrating ORC and CO2 capture in floating storage regasification units, Energy Convers. Manag., 257, 10.1016/j.enconman.2022.115410 Karimi, 2011, Capital costs and energy considerations of different alternative stripper configurations for post combustion CO2 capture, Chem. Eng. Res. Des., 89, 10.1016/j.cherd.2011.03.005 Turton, 2008, Analysis synthesis and design of chemical processes, Pearson Educ. Astolfi, 2014, Binary ORC (Organic Rankine Cycles) power plants for the exploitation of medium–low temperature geothermal sources–Part B: techno-economic optimization, Energy, 66 Coker, 2015 Jilvero, 2014, Techno-economic analysis of carbon capture at an aluminum production plant–comparison of post-combustion capture using MEA and ammonia, Energy Procedia, 63, 10.1016/j.egypro.2014.11.695 Georgousopoulos, 2021, Thermodynamic and techno-economic assessment of pure and zeotropic fluid ORCs for waste heat recovery in a biomass IGCC plant, Appl. Therm. Eng., 183, 10.1016/j.applthermaleng.2020.116202 Yang, 2017, Thermoeconomic multi-objective optimization of a dual loop organic Rankine cycle (ORC) for CNG engine waste heat recovery, Appl. Energy, 205, 10.1016/j.apenergy.2017.08.127 Nwaoha, 2019, Carbon dioxide capture from pulp mill using 2-amino-2-methyl-1-propanol and monoethanolamine blend: Techno-economic assessment of advanced process configuration, Appl. Energy, 250, 10.1016/j.apenergy.2019.05.097 Kazemi, 2016, Thermodynamic, economic and thermo-economic optimization of a new proposed organic Rankine cycle for energy production from geothermal resources, Energy Convers. Manag., 121, 391, 10.1016/j.enconman.2016.05.046 Safarian, 2015, Energy and exergy assessments of modified organic rankine cycles (ORCs), Energy Rep., 1, 1, 10.1016/j.egyr.2014.10.003 Notz, 2012, Post combustion CO2 capture by reactive absorption: pilot plant description and results of systematic studies with MEA, Int. J. Greenh. Gas. Control, 6, 84, 10.1016/j.ijggc.2011.11.004 Shengjun, 2011, Performance comparison and parametric optimization of subcritical organic rankine cycle (ORC) and transcritical power cycle system for low-temperature geothermal power generation, Appl. Energy, 88, 10.1016/j.apenergy.2011.02.034