Optimization of press temperature and time for binderless particleboard manufactured from oil palm trunk biomass at different thickness levels

B. Nilsson, Particle board. United States Patent Application Publication 2012/0217671 A1, 2012.

Abdul Khalil, 2008, Chemical composition, morphological characteristics, and cell wall structure of Malaysian oil palm fibers, Polym.-Plast. Technol., 47, 273, 10.1080/03602550701866840

Nonaka, 2013, Characterization of bagasse binderless particleboard manufactured in high-temperature range, J. Wood Sci., 59, 50, 10.1007/s10086-012-1302-6

Saito, 2013, The suitable harvesting season and the part of moso bamboo (Phyllostachys pubescens) for producing binderless boards, Wood Sci. Technol., 47, 1071, 10.1007/s00226-013-0560-9

Hashim, 2010, Evaluations of some properties of exterior particleboard made from oil palm biomass, J. Compos. Mater., 45, 1659, 10.1177/0021998310385028

Van Dam, 2006, Process for production of high density/high performance binderless boards from whole coconut husk, Part 2: coconut husk morphology, composition and properties, Ind. Crop Prod., 24, 96, 10.1016/j.indcrop.2005.03.003

Okuda, 2004, Manufacture and mechanical properties of binderless boards from kenaf core, J. Wood Sci., 50, 53, 10.1007/s10086-003-0528-8

K.C. Shen, Process for manufacturing composite products from lignocellulosic materials. United States Patent 4, 627, 921, 1986.

Nadhari, 2013, Utilization of oil palm trunk waste for manufacturing of binderless particleboard: optimization study, BioResources, 8, 1675

Baskaran, 2013, Influence of steam treatment on the properties of particleboard made from oil palm trunk with addition of polyhydroxyalkanoates, Ind. Crop Prod., 51, 334, 10.1016/j.indcrop.2013.09.023

Hashim, 2011, Characterization of raw materials and manufactured binderless particleboard from oil palm biomass, Mater. Des., 32, 246, 10.1016/j.matdes.2010.05.059

Hashim, 2011, Influence of press temperature on the properties of binderless particleboard made from oil palm trunk, Mater. Des., 32, 2520, 10.1016/j.matdes.2011.01.053

Hashim, 2010, Effect of particle geometry on the properties of binderless particleboard manufactured from oil palm trunk, Mater. Des., 31, 4251, 10.1016/j.matdes.2010.04.012

Baskaran, 2012, Properties of binderless particleboard from oil palm trunk with addition of polyhydroxyalkanoates, Composites B, 43, 1109, 10.1016/j.compositesb.2011.10.008

Montgomery, 2005

Montgomery, 1984

Cochran, 1957

JIS A 5908-2003, 2003

Montgomery, 2001

Amini, 2008, Application of response methodology for optimization of lead biosorption in an aqueous solution by Aspergillus niger, J. Hazard. Mater., 154, 694, 10.1016/j.jhazmat.2007.10.114

Bezerra, 2008, Response surface methodology (RSM) as a tool for optimization in analytical chemistry, Talanta, 76, 965, 10.1016/j.talanta.2008.05.019

Danish, 2013, Optimized preparation for large surface area activated carbon from date (Phoenix dactylifera L.) stone biomass, Biomass Bioenergy, 61, 167, 10.1016/j.biombioe.2013.12.008

Salim, 2012, Optimum manufacturing parameters for compressed lumber from oil palm (Elaeis guineensis) trunks: respond surface approach, Composites B, 43, 988, 10.1016/j.compositesb.2011.11.002