Optimization of pre-treatment selection for the use of woody waste in co-combustion plants

Chemical Engineering Research and Design - Tập 92 - Trang 1539-1562 - 2014
Mar Pérez-Fortes1, José M. Laínez-Aguirre2, Aarón David Bojarski1, Luis Puigjaner1
1Department of Chemical Engineering, Universitat Politècnica de Catalunya, Av. Diagonal 647, PG-2, 08028 Barcelona, Spain
2School of Chemical Engineering, Purdue University, 480 Stadium Mall Dr., West Lafayette, IN 47907, USA

Tài liệu tham khảo

Abdullah, 2010, Bioslurry as a fuel 3. Fuel and rheological properties of bioslurry prepared from the bio-oil and biochar of mallee biomass fast pyrolysis, Energy Fuels, 24, 5669, 10.1021/ef1008117 Akgul, 2011, Optimization-based approaches for bioethanol supply chains, Industrial and Engineering Chemistry Research, 50, 4927, 10.1021/ie101392y An, 2011, Biofuel and petroleum-based fuel supply chain research: a literature review, Biomass and Bioenergy, 35, 3763 An, 2011, A mathematical model to design a lignocellulosic biofuel supply chain system with a case study based on a region in Central Texas, Bioresource Technology, 102, 7860, 10.1016/j.biortech.2011.05.060 Ayoub, 2009, Superstructure-based design and operation for biomass utilization networks, Computers and Chemical Engineering, 33, 1770, 10.1016/j.compchemeng.2009.01.006 Bals, 2012, Developing a model for assessing biomass processing technologies within a local biomass processing depot, Bioresource Technology, 106, 161, 10.1016/j.biortech.2011.12.024 Basu, 2011, Biomass co-firing options on the emission reduction and electricity generation costs in coal-fired power plants, Renewable Energy, 36, 282, 10.1016/j.renene.2010.06.039 Bergman, 2005 Berndes, 2010, Strategies for 2nd generation biofuels in EU – co-firing to stimulate feedstock supply development and process integration to improve energy efficiency and economic competitiveness, Biomass and Bioenergy, 34, 227, 10.1016/j.biombioe.2009.07.007 Bojarski, 2009, Incorporating environmental impacts and regulations in a holistic supply chains modeling: an LCA approach, Computers & Chemical Engineering, 33, 1747, 10.1016/j.compchemeng.2009.04.009 Bowling, 2011, Facility location and supply chain optimization for a biorefinery, Industrial and Engineering Chemistry Research, 50, 6276, 10.1021/ie101921y Caputo, 2005, Economics of biomass energy utilization in combustion and gasification plants: effects of logistics variables, Biomass and Bioenergy, 28, 35, 10.1016/j.biombioe.2004.04.009 Cherubini, 2011, Life cycle assessment of bioenergy systems: state of the art and future challenges, Bioresource Technology, 102, 437, 10.1016/j.biortech.2010.08.010 Chiueh, 2012, Implications of biomass pretreatment to cost and carbon emissions: case study of rice straw and pennisetum in taiwan, Bioresource Technology, 108, 285, 10.1016/j.biortech.2012.01.006 Club Español de la Energía, 2010 Comisión Nacional de Energía (Spain), 2010. http://www.cne.es/cne/contenido.jsp?id_nodo=423&&&keyword=&auditoria=f (consulted December 2011). Couhert, 2009, Impact of torrefaction on syngas production from wood, Fuel, 88, 2286, 10.1016/j.fuel.2009.05.003 Dai, 2008, Overview and some issues related to co-firing biomass and coal, The Canadian Journal of Chemical Engineering, 86, 367, 10.1002/cjce.20052 Damen, 2006, A greenhouse gas balance of two existing international biomass import chains. The case of residue co-firing in a pulverized coal-fired power plant in The Netherlands, Mitigation and Adaptation Strategies for Global Change, 11, 1023, 10.1007/s11027-006-9032-y Dasappa, 2011, Potential of biomass energy for electricity generation in sub-Saharan Africa, Energy for Sustainable Development, 15, 203, 10.1016/j.esd.2011.07.006 Deng, 2009, Pretreatment of agricultural residues for co-gasification via torrefaction, Journal of Analytical and Applied Pyrolysis, 86, 331, 10.1016/j.jaap.2009.08.006 Ecoinvent-V1.3, 2006 Elia, 2011, Optimal energy supply network determination and life cycle analysis for hybrid coal, biomass, and natural gas to liquid (CBGTL) plants using carbon-based hydrogen production, Computers and Chemical Engineering, 35, 1399, 10.1016/j.compchemeng.2011.01.019 Faaij, 2006, Bio-energy in Europe: changing technology choices, Energy Policy, 34, 322, 10.1016/j.enpol.2004.03.026 Giarola, 2012, Environmentally conscious capacity planning and technology selection for bioethanol supply chains, Renewable Energy, 43, 61, 10.1016/j.renene.2011.12.011 Giddey, 2012, A comprehensive review of direct carbon fuel cell technology, Progress in Energy and Combustion Science, 38, 360, 10.1016/j.pecs.2012.01.003 Gómez, 2010, The potential for electricity generation from crop and forestry residues in Spain, Biomass and Bioenergy, 34, 703, 10.1016/j.biombioe.2010.01.013 Gómez, 2010, An estimation of the energy potential of agro-industrial residues in Spain, Resources, Conservation and Recycling, 54, 972, 10.1016/j.resconrec.2010.02.004 Gold, 2011, Supply chain and logistics issues of bio-energy production, Journal of Cleaner Production, 19, 32, 10.1016/j.jclepro.2010.08.009 Graves, 2003, Process flexibility in supply chains, Management Science, 49, 907, 10.1287/mnsc.49.7.907.16381 Hamelinck, 2003 Hamelinck, 2005, International bioenergy transport costs and energy balance, Biomass and Bioenergy, 29, 114, 10.1016/j.biombioe.2005.04.002 Heijungs, 2002 Higman, 2003 Iakovou, 2010, Waste biomass-to-energy supply chain management: a critical synthesis, Waste Management, 30, 1860, 10.1016/j.wasman.2010.02.030 Kin, 2011, Design of biomass processing network for biofuel production using an MILP model, Biomass and Bioenergy, 35, 853, 10.1016/j.biombioe.2010.11.008 Kondili, 1993, A general algorithm for short term scheduling of batch operations, Computers & Chemical Engineering, 17, 211, 10.1016/0098-1354(93)80015-F Kurian, 2013, Feedstock, logistics and pre-treatment processes for sustainable lignocellulosic biorefineries: a comprehensive review, Renewable and Sustainable Energy Reviews, 25, 205, 10.1016/j.rser.2013.04.019 Lamers, 2012, Development in international solid biofuel trade – an analysis of volumes, policies, and market factors, Renewables and Sustainable Energy Reviews, 16, 3176, 10.1016/j.rser.2012.02.027 Laínez-Aguirre, 2009, Flexible design-planning of supply chain networks, AIChE Journal, 55, 1736, 10.1002/aic.11942 Leduc, 2008, Optimal location of wood gasification plants for methanol production with heat recovery, International Journal of Energy Research, 32, 1080, 10.1002/er.1446 Liu, 2014, Upgrading of waste biomass by hydrothermal carbonization (HTC) and low temperature pyrolysis (LTP): a comparative evaluation, Applied Energy, 114, 857, 10.1016/j.apenergy.2013.06.027 López-Vilariño, 2003, Behavior of fluorine and chlorine in Spain coal fired power plants with pulverized coal boilers and fluidized bed boiler, Environmental Technology, 24, 687, 10.1080/09593330309385604 Maciejewska, 2006 Magalhães, 2009, Techno-economic assessment of biomass pre-conversion processes as a part of biomass-to-liquids line-up, Biofuels, Bioproducts and Biorefining, 3, 584, 10.1002/bbb.183 Mele, 2011, Multiobjective model for more sustainable fuel supply chains. A case study of sugar cane industry in Argentina, Industrial and Engineering Chemistry Research, 50, 4939, 10.1021/ie101400g Ministerio de Industria, Turismo y Comercio (Spain), 2010. http://www.mityc.es/energia/petroleo/Precios/Informes/Informesmensuales/2010/diciembre2010.pdf (consulted December 2011). Operador del Mercado Eléctrico (OMEL) (Spain), 2011. http://www.omel.es/inicio (consulted December 2010). Panichelli, 2008, GIS-based approach for defining bioenergy facilities location: a case study in Northern Spain based on marginal delivery costs and resources competition between facilities, Biomass and Bioenergy, 32, 289, 10.1016/j.biombioe.2007.10.008 Perry, 2008, Recent trends and future opportunities in UK bioenergy: maximizing biomass penetration in a centralised energy system, Biomass and Bioenergy, 32, 688, 10.1016/j.biombioe.2008.01.004 PRé Consultants B.V., 2004 Pérez-Fortes, 2011 Pérez-Fortes, 2012, Design of regional and sustainable bio-based networks for electricity generation using a multi-objective MILP approach, Energy, 44, 79, 10.1016/j.energy.2012.01.033 Prins, 2006, More efficient biomass gasification via torrefaction, Energy, 31, 3458, 10.1016/j.energy.2006.03.008 Prins, 2006, Torrefaction of wood. Part 1: Weight loss kinetics, Journal of Analytical and Applied Pyrolysis, 77, 28, 10.1016/j.jaap.2006.01.002 Puigjaner, 2011 Red Eléctrica de España (Spain), 2010 Rentizelas, 2009, An optimization model for multi-biomass tri-generation energy supply, Biomass and Bioenergy, 33, 223, 10.1016/j.biombioe.2008.05.008 Rentizelas, 2009, Logistics issues of biomass: the storage problem and the multi-biomass supply chain, Renewable and Sustainable Energy Reviews, 13, 887, 10.1016/j.rser.2008.01.003 Rodrigues, 2007, Performance evaluation of atmospheric biomass integrated gasifier combined cycle systems under different strategies for the use of low calorific gases, Energy Conversion and Management, 48, 1289, 10.1016/j.enconman.2006.09.016 Royo, 2012, Large-scale analysis of GHG (greenhouse gas) reduction by means of biomass co-firing at country-scale: application to the Spanish case, Energy, 48, 255, 10.1016/j.energy.2012.06.046 Sami, 2001, Co-firing of coal and biomass fuel blends, Progress in Energy and Combustion Science, 27, 171, 10.1016/S0360-1285(00)00020-4 Scott, 2012, A review of multi-criteria decision-making methods for bioenergy systems, Energy, 42, 146, 10.1016/j.energy.2012.03.074 Sultana, 2010, Development of agri-pellet production cost and optimum size, Bioresource Technology, 101, 5609, 10.1016/j.biortech.2010.02.011 Tavares, 2011, Multi-criteria GIS-based siting of an incineration plant for solid waste, Waste Management, 31, 1960, 10.1016/j.wasman.2011.04.013 Uslu, 2008, Pre-treatment technologies, and their effect on international bioenergy supply chain logistics. Techno-economic evaluation of torrefaction, fast pyrolysis and pelletization, Energy, 33, 1206, 10.1016/j.energy.2008.03.007 Van Den Broek, 1996, Biomass combustion for power generation, Biomass and Bioenergy, 11, 271, 10.1016/0961-9534(96)00033-5 Wu, 2010, Bioslurry as a fuel 1. Viability of a bioslurry-based bioenergy supply chain for mallee biomass in Western Australia, Energy and Fuels, 24, 5652, 10.1021/ef1008105 You, 2012, Optimal design of sustainable cellulosic biofuel supply chains: multiobjective optimization coupled with life cycle assessment and input–output analysis, AIChE Journal, 58, 1157, 10.1002/aic.12637 Yu, 2009, Mallee biomass as a key bioenergy source in Western Australia: importance of biomass supply chain, Energy and Fuels, 23, 3290, 10.1021/ef900103g Zamboni, 2009, Spatially explicit static model for the strategic design for future bioethanol production systems. 2: Multi-objective environmental optimization, Energy Fuels, 23, 5134, 10.1021/ef9004779 Zamboni, 2009, Spatially explicit static model for the strategic design for future bioethanol production systems. 1: Cost minimization, Energy Fuels, 23, 5121, 10.1021/ef900456w Zhang, 2011, A GIS-based method for identifying the optimal location for a facility to convert forest biomass to biofuel, Biomass and Bioenergy, 35, 3951