Optimization of Porous Insert Configuration in a Central Receiver Tube for Heat Transfer Enhancement

Zheng, 2014, An entransy dissipation-based optimization principle for solar power tower plants, Sci China Technol Sci, 57, 773, 10.1007/s11431-014-5491-7 Wang, 2014, A design method and numerical study for a new type parabolic trough solar collector with uniform solar flux distribution, Sci China Tech Sci, 57, 531, 10.1007/s11431-013-5452-6 Cheng, 2012, Numerical study of heat transfer enhancement by unilateral longitudinal vortex generators inside parabolic trough solar receivers, Int J Heat Mass Transfer, 55, 5631, 10.1016/j.ijheatmasstransfer.2012.05.057 Ravi Kumar, 2012, Effect of porous disc receiver configurations on performance of solar parabolic trough concentrator, Heat Mass Transfer, 48, 555, 10.1007/s00231-011-0903-8 Wang, 2012, Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams, Appl Energy, 102, 449, 10.1016/j.apenergy.2012.07.026 Mwesigye, 2014, Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts, Appl Energy, 136, 989, 10.1016/j.apenergy.2014.03.037 Liao, 2014, Allowable flux density on a solar central receiver, Renew Energy, 62, 747, 10.1016/j.renene.2013.08.044 Calmidi, 2000, Forced convection in high porosity metal foams, J Heat Transfer, 122, 557, 10.1115/1.1287793 Zavoico AB. Solar power tower design basis document, Sandia National Laboratories, 2001. Chu, 2009, Three-dimensional numerical study on fin-and-oval-tube heat exchanger with longitudinal vortex generators, Appl Therm Eng., 28, 859, 10.1016/j.applthermaleng.2008.04.021 Huang ZF. Experimental and numerieal studies of enhancing heat transfer in a tube by inserting porous media at the core, Ph.D. dissertation, Huazhong University of Science and Technology, 2004.