Optimization and parametric analysis of a nanofluid based photovoltaic thermal system: 3D numerical model with experimental validation

Dupeyrat, 2014, Study of the thermal and electrical performances of PVT solar hot water system, Energy Build, 68, 751, 10.1016/j.enbuild.2012.09.032 Chow, 2010, A review on photovoltaic/thermal hybrid solar technology, Appl Energy, 87, 365, 10.1016/j.apenergy.2009.06.037 Chandrasekar, 2013, Passive cooling of standalone flat PV module with cotton wick structures, Energy Convers Manage, 71, 43, 10.1016/j.enconman.2013.03.012 Park, 2014, Energy and exergy analysis of typical renewable energy systems, Renew Sustain Energy Rev, 30, 105, 10.1016/j.rser.2013.09.011 Sardarabadi, 2014, Experimental investigation of the effects of silica/water nanofluid on PV/T (photovoltaic thermal units), Energy, 66, 264, 10.1016/j.energy.2014.01.102 Daghigh, 2011, Predicting the performance of amorphous and crystalline silicon based photovoltaic solar thermal collectors, Energy Convers Manage, 52, 1741, 10.1016/j.enconman.2010.10.039 Touafek, 2014, Theoretical and experimental study of sheet and tubes hybrid PVT collector, Energy Convers Manage, 80, 71, 10.1016/j.enconman.2014.01.021 Moradgholi, 2014, Application of heat pipe in an experimental investigation on a novel photovoltaic/thermal (PV/T) system, Sol Energy, 107, 82, 10.1016/j.solener.2014.05.018 Farshchimonfared, 2015, Channel depth, air mass flow rate and air distribution duct diameter optimization of photovoltaic thermal (PV/T) air collectors linked to residential buildings, Renew Energy, 76, 27, 10.1016/j.renene.2014.10.044 Yazdanpanahi, 2015, Experimental investigation of exergy efficiency of a solar photovoltaic thermal (PVT) water collector based on exergy losses, Sol Energy, 118, 197, 10.1016/j.solener.2015.04.038 Ma, 2015, Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: a review and outlook, Renew Sustain Energy Rev, 43, 1273, 10.1016/j.rser.2014.12.003 Daghigh, 2011, Advances in liquid based photovoltaic/thermal (PV/T) collectors, Renew Sustain Energy Rev, 15, 4156, 10.1016/j.rser.2011.07.028 Bhattarai, 2012, Simulation and model validation of sheet and tube type photovoltaic thermal solar system and conventional solar collecting system in transient states, Sol Energy Mater Sol Cells, 103, 184, 10.1016/j.solmat.2012.04.017 Bahaidarah, 2013, Performance evaluation of a PV (photovoltaic) module by back surface water cooling for hot climatic conditions, Energy, 59, 445, 10.1016/j.energy.2013.07.050 Hazami, 2016, Energetic and exergetic performances analysis of a PV/T (photovoltaic thermal) solar system tested and simulated under to Tunisian (North Africa) climatic conditions, Energy, 107, 78, 10.1016/j.energy.2016.03.134 Yazdanifard, 2016, Investigating the performance of a water-based photovoltaic/thermal (PV/T) collector in laminar and turbulent flow regime, Renew Energy, 99, 295, 10.1016/j.renene.2016.07.004 Chow, 2009, Energy and exergy analysis of photovoltaic–thermal collector with and without glass cover, Appl Energy, 86, 310, 10.1016/j.apenergy.2008.04.016 Corbin, 2010, Experimental and numerical investigation on thermal and electrical performance of a building integrated photovoltaic–thermal collector system, Energy Build, 42, 76, 10.1016/j.enbuild.2009.07.013 Siddiqui, 2012, Three-dimensional thermal modeling of a photovoltaic module under varying conditions, Sol Energy, 86, 2620, 10.1016/j.solener.2012.05.034 Mahian, 2013, A review of the applications of nanofluids in solar energy, Int J Heat Mass Transf, 57, 582, 10.1016/j.ijheatmasstransfer.2012.10.037 Verma, 2015, Progress of nanofluid application in solar collectors: a review, Energy Convers Manage, 100, 324, 10.1016/j.enconman.2015.04.071 Sarsam, 2015, A review of studies on using nanofluids in flat-plate solar collectors, Sol Energy, 122, 1245, 10.1016/j.solener.2015.10.032 Alim, 2013, Analyses of entropy generation and pressure drop for a conventional flat plate solar collector using different types of metal oxide nanofluids, Energy Build, 66, 289, 10.1016/j.enbuild.2013.07.027 Michael, 2015, Performance analysis of a copper sheet laminated photovoltaic thermal collector using copper oxide–water nanofluid, Sol Energy, 119, 439, 10.1016/j.solener.2015.06.028 Ghadiri, 2015, Experimental investigation of a PVT system performance using nano ferrofluids, Energy Convers Manage, 103, 468, 10.1016/j.enconman.2015.06.077 Al-Shamani, 2016, Experimental studies of rectangular tube absorber photovoltaic thermal collector with various types of nanofluids under the tropical climate conditions, Energy Convers Manage, 124, 528, 10.1016/j.enconman.2016.07.052 Elmir, 2012, Numerical simulation of cooling a solar cell by forced convection in the presence of a nanofluid, Energy Procedia, 18, 594, 10.1016/j.egypro.2012.05.072 Rejeb, 2016, Numerical and model validation of uncovered nanofluid sheet and tube type photovoltaic thermal solar system, Energy Convers Manage, 110, 367, 10.1016/j.enconman.2015.11.063 Sardarabadi, 2017, Experimental investigation of the effects of using metal-oxides/water nanofluids on a photovoltaic thermal system (PVT) from energy and exergy viewpoints, Energy, 138, 682, 10.1016/j.energy.2017.07.046 Khanjari, 2016, Numerical investigation on using of nanofluid in a water-cooled photovoltaic thermal system, Energy Convers Manage, 122, 263, 10.1016/j.enconman.2016.05.083 Yazdanifard, 2017, Performance of nanofluid-based photovoltaic/thermal systems: a review, Renew Sustain Energy Rev, 76, 323, 10.1016/j.rser.2017.03.025 Xu, 2014, Concentration photovoltaic–thermal energy co-generation system using nanofluids for cooling and heating, Energy Convers Manage, 87, 504, 10.1016/j.enconman.2014.07.047 Khanjari, 2017, Evaluating the environmental parameters affecting the performance of photovoltaic thermal system using nanofluid, Appl Therm Eng, 115, 178, 10.1016/j.applthermaleng.2016.12.104 Mahian, 2014, Entropy generation during Al2O3/water nanofluid flow in a solar collector: effects of tube roughness, nanoparticle size, and different thermophysical models, Int J Heat Mass Transf, 78, 64, 10.1016/j.ijheatmasstransfer.2014.06.051 Ebrahimnia-Bajestan, 2016, Experimental and numerical investigation of nanofluids heat transfer characteristics for application in solar heat exchangers, Int J Heat Mass Transf, 92, 1041, 10.1016/j.ijheatmasstransfer.2015.08.107 Xuan, 2003, Aggregation structure and thermal conductivity of nanofluids, AIChE J, 49, 1038, 10.1002/aic.690490420 Corcione, 2011, Empirical correlating equations for predicting the effective thermal conductivity and dynamic viscosity of nanofluids, Energy Convers Manage, 52, 789, 10.1016/j.enconman.2010.06.072 Joshi, 2007, Energy and exergy efficiencies of a hybrid photovoltaic–thermal (PV/T) air collector, Renew Energy, 32, 2223, 10.1016/j.renene.2006.11.013 Sardarabadi, 2016, Experimental and numerical study of metal-oxides/water nanofluids as coolant in photovoltaic thermal systems (PVT), Sol Energy Mater Sol Cells, 157, 533, 10.1016/j.solmat.2016.07.008 Teo, 2012, An active cooling system for photovoltaic modules, Appl Energy, 90, 309, 10.1016/j.apenergy.2011.01.017 Pierrick, 2015, Dynamic numerical model of a high efficiency PV–T collector integrated into a domestic hot water system, Sol Energy, 111, 68, 10.1016/j.solener.2014.10.031 Michael, 2016, Fabrication, experimental study and testing of a novel photovoltaic module for photovoltaic thermal applications, Renew Energy, 90, 95, 10.1016/j.renene.2015.12.064 Swinbank, 1963, Long-wave radiation from clear skies, Q J R Meteorolog Soc, 89, 339, 10.1002/qj.49708938105 Evans, 1981, Simplified method for predicting photovoltaic array output, Sol Energy, 27, 555, 10.1016/0038-092X(81)90051-7 Bayrak, 2017, A review on exergy analysis of solar electricity production, Renew Sustain Energy Rev, 74, 755, 10.1016/j.rser.2017.03.012 Sivasakthivel, 2014, Optimization of operating parameters of ground source heat pump system for space heating and cooling by Taguchi method and utility concept, Appl Energy, 116, 76, 10.1016/j.apenergy.2013.10.065 Verma, 2014, Optimization of solar assisted ground source heat pump system for space heating application by Taguchi method and utility concept, Energy Build, 82, 296, 10.1016/j.enbuild.2014.07.029 Kuo, 2011, Using the Taguchi method and grey relational analysis to optimize the flat-plate collector process with multiple quality characteristics in solar energy collector manufacturing, Energy, 36, 3554, 10.1016/j.energy.2011.03.065 Sardarabadi, 2017, Experimental study of using both ZnO/water nanofluid and phase change material (PCM) in photovoltaic thermal systems, Sol Energy Mater Sol Cells, 161, 62, 10.1016/j.solmat.2016.11.032 Li, 2009, Experimental investigation on heat transfer characteristics of magnetic fluid flow around a fine wire under the influence of an external magnetic field, Exp Therm Fluid Sci, 33, 591, 10.1016/j.expthermflusci.2008.12.003 Nkurikiyimfura, 2013, Heat transfer enhancement by magnetic nanofluids—a review, Renew Sustain Energy Rev, 21, 548, 10.1016/j.rser.2012.12.039