Optimization and control of a stand-alone hybrid solid oxide fuel cells/gas turbine system coupled with dry reforming of methane

Kendall, 2016 Palsson, 2000, Combined solid oxide fuel cell and gas turbine systems for efficient power and heat generation, J. Power Sources, 86, 442, 10.1016/S0378-7753(99)00464-4 Kuchonthara, 2003, Combinations of solid oxide fuel cell and several enhanced gas turbine cycles, J. Power Sources, 124, 65, 10.1016/S0378-7753(03)00740-7 Chan, 2002, Modeling of simple hybrid solid oxide fuel cell and gas turbine power plant, J. Power Sources, 109, 111, 10.1016/S0378-7753(02)00051-4 Calise, 2006, Design and partial load exergy analysis of hybrid SOFC-GT power plant, J. Power Sources, 158, 225, 10.1016/j.jpowsour.2005.07.088 Zhang, 2004, Simulation of a tubular solid oxide fuel cell stack using Aspen Plus unit operation models, Energy Convers. Manage., 46, 181, 10.1016/j.enconman.2004.03.002 Buonomano, 2015, Hybrid solid oxide fuel cells–gas turbine systems for combined heat and power: a review, Appl. Energy, 156, 32, 10.1016/j.apenergy.2015.06.027 Lim, 2012, Optimal design and decision for combined steam reforming process with dry methane reforming to reuse CO2 as a raw material, Ind. Eng. Chem. Res., 51, 4982, 10.1021/ie200870m Hernandez, 2016, Optimal process operation for biogas reforming to methanol: effects of dry reforming and biogas composition, Ind. Eng. Chem. Res., 55, 6677, 10.1021/acs.iecr.6b01044 Wu, 2014, Conceptual design of syngas production systems with almost net-zero CO2 emissions, Energy, 74, 753, 10.1016/j.energy.2014.07.042 Luyben, 2016, Control of parallel dry methane and steam methane reforming processes for Fischer–Tropsch syngas, J. Process Control, 39, 77, 10.1016/j.jprocont.2015.11.007 Liese, 2005, Performance comparison of internal reforming against external reforming in a solid oxide fuel cell gas turbine hybrid system, J. Eng. Gas Turbines Power, 127, 86, 10.1115/1.1788689 Fan, 2009, Catalytic technology for carbon dioxide reforming of methane to synthesis, ChemCatChem, 1, 192, 10.1002/cctc.200900025 Barelli, 2014, Solid oxide fuel cell technology coupled with methane dry reforming: a viable option for high efficiency plant with reduced CO2 emissions, Energy, 71, 118, 10.1016/j.energy.2014.04.070 Barelli, 2017, SOFC stack coupled with dry reforming, Appl. Energy, 192, 498, 10.1016/j.apenergy.2016.08.167 Jurado, 2006, Predictive control of solid oxide fuel cells using fuzzy Hammerstein models, J. Power Sources, 158, 245, 10.1016/j.jpowsour.2005.08.041 Spivey, 2012, Dynamic modeling simulation, and MIMO predictive control of a tubular solid oxide fuel cell, J. Process Control, 22, 1502, 10.1016/j.jprocont.2012.01.015 Stiller, 2006, Control strategy for a solid oxide fuel cell and gas turbine hybrid system, J. Power Sources, 158, 303, 10.1016/j.jpowsour.2005.09.010 Kandepu, 2007, Modeling and control of a SOFC-GT-based autonomous power system, Energy, 32, 406, 10.1016/j.energy.2006.07.034 Leuchta, 2011, Fuel cell system modeling for solid oxide fuel cell/gas turbine hybrid power plants, part I: Modeling and simulation framework, J. Power Sources, 196, 1205, 10.1016/j.jpowsour.2010.08.081 Wu, 2016, Design and control of a SOFC/GT hybrid power generation system with low carbon emissions, Ind. Eng. Chem. Res., 55, 1281, 10.1021/acs.iecr.5b01961 Fan, 2009, Catalytic technology for carbon dioxide reforming of methane to synthesis, ChemCatChem, 1, 192, 10.1002/cctc.200900025 Richardson, 1990, Carbon dioxide reforming of methane with supported rhodium, Appl. Catal., 61, 293, 10.1016/S0166-9834(00)82152-1 Kumar, 2008, The production of syngas by dry reforming in membrane reactor using alumina-supported Rh catalyst: a simulation study, Int. J. Chem. Reactor Eng., 6, A109, 10.2202/1542-6580.1803 Luyben, 2006 Luyben, 1998 Bequette, 2003, Process control: modeling Chatrattanawet, 2015, Control structure design and dynamic modeling for a solid oxide fuel cell with direct internal reforming of methane, Chem. Eng. Res. Des., 98, 202, 10.1016/j.cherd.2015.04.029