Optimisation of mechanical properties of polyethylene terephthalate fibre/fly ash hybrid concrete composite

Alberti, 2016, Fracture mechanical of polyolefin fibre reinforced concrete: study of the influence of the concrete properties, casting procedure, the fibre length and specimen size, Eng. Fract. Mech., 154, 225, 10.1016/j.engfracmech.2015.12.032 Afroughsabet, 2016, High-performance fiber-reinforced concrete: a review, J. Mater. Sci., 51, 6517, 10.1007/s10853-016-9917-4 Carpinteri, 2017, Mode I fracture toughness of fibre reinforced concrete, Theor. Appl. Fract. Mech., 91, 66, 10.1016/j.tafmec.2017.03.015 Kumar, 2015, Strength characteristics of saw dust ash based geopolymer concrete, Int. J. Chemtech Res., 8, 738 Sainz-Aja, 2022, Recycled polyethylene fibres for structural concrete, Appl. Sci., 12, 1 Merli, 2020, Recycled fibers in reinforced concrete: a systematic literature, J. Clean. Prod., 248, 1 Luna, 2020, nisotropy and bond behaviour of recycled Polyethylene terephthalate (PET) fibre as concrete reinforcement, Constr. Build. Mater., 265, 1 Gu, 2016, Use of recycled plastics in concrete: a critical review, Waste Manag., 51, 19, 10.1016/j.wasman.2016.03.005 Ali, 2016, Stuidy on strengthening of RC slabs with different innovative techniques, Open J. Civ. Eng., 6, 516, 10.4236/ojce.2016.64044 Badave, 2018, Study on effect of waste polyethylene terephthalate bottle fibers on silica fume concrete - a review, Int. J. Sci. Eng. Res., 9, 2046 Hopewell, 2009, Plastics recycling: challenges and opportunities, Philos. Trans. R. Soc. Biol. Sci., 364, 2115, 10.1098/rstb.2008.0311 Choi, 2005, Effects of waste PET bottles aggregate on properties of concrete, Cem. Concr. Res., 35, 776, 10.1016/j.cemconres.2004.05.014 Albano, 2009, Influence of content and particle size of waste PET bottles on concrete behaviour at different w/c ratios, Waste Manag., 29, 2707, 10.1016/j.wasman.2009.05.007 Akcaozoglu, 2010, An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete, Waste Manag., 30, 285, 10.1016/j.wasman.2009.09.033 Frigione, 2010, Recycling PET bottles as fine aggregate in concrete, Waste Manag., 30, 1101, 10.1016/j.wasman.2010.01.030 Xu, 2019, Enhancing the initial cracking fracture toughness of steel-polyvinyl alcohol hybrid fibers ultra high toughness cementitious composites by incorporating multi-walled carbon nanotubes, Constr. Build. Mater., 195, 269, 10.1016/j.conbuildmat.2018.10.133 Nurwidayati, 2021, Investigation on mechanical properties of fiber reinforced concrete, IOP Conf. Ser. Earth Environ. Sci., 758, 1, 10.1088/1755-1315/758/1/012016 Li, 2021, Nanoindentation and porosity fractal dimension of calcium carbonate whisker reinforced cement paste after elevated temperatures (up to 900C), Fractals, 29, 10.1142/S0218348X21400016 Li, 2021, Surface cracking and fractal characteristics of bending fractured polypropylene fiber-reinforced geopolymer mortar, Fractal Fractions, 5 Zhang, 2022, Assessment of fiber factor for the fracture toughness of polyethylene fiber reinforced geopolymer, Constr. Build. Mater., 319, 1, 10.1016/j.conbuildmat.2021.126130 Li, 2021, Surface cracking and fractal characteristics of bending fractured polypropylene fiber-reinforced geopolymer mortar, Fractal Fract., 5, 1 Ataei, 2017, Mechanical properties of polyethylene terephalate particle based concrete: a review, Airfield Highw., 1, 57 Rahmani, 2013, On the mechanical properties of concrete containing waste PET particles, Constr. Build. Mater., 47, 1302, 10.1016/j.conbuildmat.2013.06.041 Rahmani, 2013, On the mechanical properties of concrete containing waste PET particles, Constr. Build. Mater., 47, 1302, 10.1016/j.conbuildmat.2013.06.041 Marthong, 2016, ). Influence of PET fiber geometry on the mechanical properties of concrete: an experimental investigation, Eur. J. Environ. Civ. Eng., 20, 771, 10.1080/19648189.2015.1072112 Ismail, 2008, Use of waste plastic in concrete mixture as aggregate replacement, Waste Manag., 28, 2041, 10.1016/j.wasman.2007.08.023 Alani, 2022, Effect of the incorporation of PET fiber and ternary blended binder on the flexural and tensile behaviour of ultra-high performance green concrete, Constr. Build. Mater., 331, 1, 10.1016/j.conbuildmat.2022.127306 Borg, 2016, Early age performance and mechanical characteristics of recycled PET fibre reinforced concrete, Constr. Build. Mater., 108, 29, 10.1016/j.conbuildmat.2016.01.029 Pelisser, 2012, Mechanical properties of recycled PET fibres in concrete, Mater. Res., 15, 679, 10.1590/S1516-14392012005000088 Sayi, 2021, Physical and durability properties of recycled polyethylene terephthalate (PET) fibre reinforced concrete, Eur. J. Environ. Civ. Eng. Song, 2022, Mechanical properties of polypropylene-fiber-reinforced high-performance concrete based on the response surface method, Adv. Mater. Sci. Eng., 2022, 1 S. Zulu , D. Allopi, Optimising the Usage of Fly Ash in Concrete in the Construction in the Construction of Roadworks, Johannesburg, 2015. Barbuta, 2017, Combined effect of fly ash and fibers on properties of cement concrete, Procedia Eng., 1881, 280, 10.1016/j.proeng.2017.02.390 Nkomo, 2022, Effects of hybrid polyethylene terephthalate fibre and fly ash on mechanical properties of concrete, Mater. Res. Express, 9, 1, 10.1088/2053-1591/ac703d Yao, 2018, analytical dislacement solution for statistical determinate beams based on a trilinear moment-curvature model, Struct. Concr., 19, 1619, 10.1002/suco.201700150 Rossi, 2017, Numerical modeling of the cracking behaviour of a steel-fiber reinforced concrete beam on grade, Struct. Concr., 18, 571, 10.1002/suco.201600002 Yang, 2019, Uniaxial compression mechanical properties and fracture characteristics of brucite fiber reinforced cement based composites, Compos Struct., 212, 148, 10.1016/j.compstruct.2019.01.030 Yang, 2019, Uniaxial compression mechanical property and fracture behaviour of hybrid inorganic short mineral fibes reinforced cement based material, Cem. Concr. Compos, 104 Younsi, 2011, Performance-based design and carbonation of concrete with high fly ash content, Cem. Concr. Compos, 33, 993, 10.1016/j.cemconcomp.2011.07.005 Scheffe, 2018, The simplex-centroid design for experiments with mixtures, J. R. Stat. Soc. Ser. B, 25, 235 Jiao, 2018, Mixture design of concrete using simplex centroid design method, Cem. Concr. Compos., 89 Soudki, 2001, Full factorial optimization of concrete mix design for hot climates, J. Mater. Civ. Eng., 13, 427, 10.1061/(ASCE)0899-1561(2001)13:6(427) Zhao, 2020, Factorial experiment study on the mechanical properties of sandstone–concrete specimens under different Freeze–Thaw conditions, J. Mater. Civ. Eng., 13 Zhang, 2021, Numerical modeling of rebar-matrx-bond behaviours of nano-SiO2 and PVA fiber reinforced geopolymer composites, Ceram. Int., 47, 11727, 10.1016/j.ceramint.2021.01.012 Li, 2021, Surface cracking and fractal characteristics of bending fractured polypropylene fiber-reinforced geopolymer mortar, Fractal Fract., 5 S. 5861-1:2006, Sampling of Freshly Mixed Concrete, The South African Bureau of Standards, Pretoria, 2006. ASTM C806–02, Standard Test Method for Rebound Number of Hardened Concrete, ASTM International, West Conshohocken, 2004. S. 5863:2006, Flexural Strength of Hardened Concrete, The South African Bureau of Standards, Pretoria, 2006. ASTM C78–00, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third Point Loading), ASTM, West Conshohocken, 2004. ASTM C496, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, American Standard of Testing Materials International, West Conshohocken, 2010. Roesler, 2004, Fracture of plain and fiber-reinforced concrete slabsunder monotonic loading, J. Mater. Civ. Eng., 16, 452, 10.1061/(ASCE)0899-1561(2004)16:5(452) Buitrago, 2020, A parametric computational study of rc buildingstructures under corner-column removal situations, Appl. Sci., 10, 1 Namarak, 2018, Development of concrete paving blocks prepared from waste materials without portland cement, Mater. Sci., 24, 92 Stawiski, 2012, Strength of concrete in slabs, investigates along direction of concreting, Open J. Civ. Eng., 2, 22, 10.4236/ojce.2012.21004 Zain, 2002, Prediction of splitting tensile strength of high-performance concrete, Cem. Concr. Res., vol. 32, 1251, 10.1016/S0008-8846(02)00768-8 Karthiyaini, 2019, Prediction of mechanical strength of fiber admixed concrete using multiple regression analysis and artificial neural network, Adv. Mater. Sci. Eng., 1, 10.1155/2019/4654070