Optimal design of shell-graded-infill structures by a hybrid MMC-MMV approach

Leary, 2014, Optimal topology for additive manufacture: A method for enabling additive manufacture of support-free optimal structures, Mater. Des., 63, 678, 10.1016/j.matdes.2014.06.015 Gaynor, 2016, Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design, Struct. Multidiscip. Optim., 54, 1157, 10.1007/s00158-016-1551-x Langelaar, 2017, An additive manufacturing filter for topology optimization of print-ready designs, Struct. Multidiscip. Optim., 55, 871, 10.1007/s00158-016-1522-2 Qian, 2017, Undercut and overhang angle control in topology optimization: A density gradient based integral approach, Internat. J. Numer. Methods Engrg., 111, 247, 10.1002/nme.5461 Guo, 2017, Self-supporting structure design in additive manufacturing through explicit topology optimization, Comput. Methods Appl. Mech. Engrg., 323, 27, 10.1016/j.cma.2017.05.003 Allaire, 2018, Optimizing supports for additive manufacturing, Struct. Multidiscip. Optim., 58, 2493, 10.1007/s00158-018-2125-x Liu, 2018, To, current and future trends in topology optimization for additive manufacturing, Struct. Multidiscip. Optim., 57, 2457, 10.1007/s00158-018-1994-3 Clausen, 2016, Exploiting additive manufacturing infill in topology optimization for improved buckling load, Engineering, 2, 250, 10.1016/J.ENG.2016.02.006 Wu, 2018, Infill optimization for additive manufacturing—approaching bone-like porous structures, IEEE Trans. Vis. Comput. Graphics, 24, 1127, 10.1109/TVCG.2017.2655523 Osorio, 2011, Morphological aspects and mechanical properties of single bamboo fibers and flexural characterization of bamboo/ epoxy composites, J. Reinf. Plast. Compos., 30, 396, 10.1177/0731684410397683 Luo, 2019, Topology optimization of shell–infill structures using an erosion-based interface identification method, Comput. Methods Appl. Mech. Engrg., 355, 94, 10.1016/j.cma.2019.05.017 Liu, 2017, Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications, Prog. Mater. Sci., 88, 467, 10.1016/j.pmatsci.2017.04.013 Zhou, 2008, Design of graded two-phase microstructures for tailored elasticity gradients, J. Mater. Sci., 43, 5157, 10.1007/s10853-008-2722-y Lin, 2009, Design optimization of functionally graded dental implant for bone remodeling, Compos. Part. B-Eng., 40, 668, 10.1016/j.compositesb.2009.04.015 Radman, 2012, Topology optimization of functionally graded cellular materials, J. Mater. Sci., 48, 1503, 10.1007/s10853-012-6905-1 Radman, 2014, Maximizing stiffness of functionally graded materials with prescribed variation of thermal conductivity, Comput. Mater. Sci., 82, 457, 10.1016/j.commatsci.2013.10.024 Wu, 2016, A system for high-resolution topology optimization, IEEE Trans. Vis. Comput. Graphics, 22, 1195, 10.1109/TVCG.2015.2502588 Wang, 2017, Concurrent design with connectable graded microstructures, Comput. Methods Appl. Mech. Engrg., 317, 84, 10.1016/j.cma.2016.12.007 Liu, 2018, Parameterized level-set based topology optimization method considering symmetry and pattern repetition constraints, Comput. Methods Appl. Mech. Engrg., 340, 1079, 10.1016/j.cma.2018.04.034 Wei, 2018, An 88-line MATLAB code for the parameterized level set method based topology optimization using radial basis functions, Struct. Multidiscip. Optim., 58, 831, 10.1007/s00158-018-1904-8 Garner, 2019, Compatibility in microstructural optimization for additive manufacturing, Addit. Manuf., 26, 65 Clausen, 2015, Topology optimization of coated structures and material interface problems, Comput. Methods Appl. Mech. Engrg., 290, 524, 10.1016/j.cma.2015.02.011 Wadbro, 2019, Multiscale design for additive manufactured structures with solid coating and periodic infill pattern, Comput. Methods Appl. Mech. Engrg., 357, 10.1016/j.cma.2019.112605 Wang, 2018, A level set method for shape and topology optimization of coated structures, Comput. Methods Appl. Mech. Engrg., 329, 553, 10.1016/j.cma.2017.09.017 Fu, 2019, Topology optimization of shell-infill structures using a distance regularized parametric level-set method, Struct. Multidiscip. Optim., 59, 249, 10.1007/s00158-018-2064-6 Wu, 2017, Minimum compliance topology optimization of shell–infill composites for additive manufacturing, Comput. Methods Appl. Mech. Engrg., 326, 358, 10.1016/j.cma.2017.08.018 Groen, 2019, Homogenization-based stiffness optimization and projection of 2D coated structures with orthotropic infill, Comput. Methods Appl. Mech. Engrg., 349, 722, 10.1016/j.cma.2019.02.031 Wang, 2018, Design of graded lattice structure with optimized mesostructures for additive manufacturing, Mater. Des., 142, 114, 10.1016/j.matdes.2018.01.011 Liu, 2017, Additive manufacturing-oriented design of graded lattice structures through explicit topology optimization, Trans. ASME J. Appl. Mech., 84, 10.1115/1.4036941 Guo, 2014, Doing topology optimization explicitly and geometrically—a new moving morphable components based framework, Trans. ASME J. Appl. Mech., 81, 10.1115/1.4027609 Zhang, 2017, Structural topology optimization through explicit boundary evolution, Trans. ASME J. Appl. Mech., 84, 10.1115/1.4034972 Zhang, 2016, Minimum length scale control in structural topology optimization based on the moving morphable components (MMC) approach, Comput. Methods Appl. Mech. Engrg., 311, 327, 10.1016/j.cma.2016.08.022 Guo, 2016, Explicit structural topology optimization based on moving morphable components (MMC) with curved skeletons, Comput. Methods Appl. Mech. Engrg., 310, 711, 10.1016/j.cma.2016.07.018 Zhang, 2016, A new topology optimization approach based on moving morphable momponents (MMC) and the ersatz material model, Struct. Multidiscip. Optim., 53, 1243, 10.1007/s00158-015-1372-3 Zhang, 2016, Lagrangian description based topology optimization-a revival of shape optimization, Trans. ASME J. Appl. Mech., 83, 10.1115/1.4032432 Zhang, 2017, Explicit three dimensional topology optimization via moving morphable void (MMV) approach, Comput. Methods Appl. Mech. Engrg., 322, 590, 10.1016/j.cma.2017.05.002 Liu, 2018, An efficient moving morphable component (MMC)-based approach for multi-resolution topology optim ization, Struct. Multidiscip. Optim., 58, 2455, 10.1007/s00158-018-2114-0 Xue, 2019, Explicit structural topology optimization under finite deformation via moving morphable void (MMV) approach, Comput. Methods Appl. Mech. Engrg., 344, 798, 10.1016/j.cma.2018.10.011 Lei, 2019, Machine learning-driven real-time topology optimization under moving morphable component-based framework, Trans. ASME J. Appl. Mech., 86, 10.1115/1.4041319 Norato, 2015, A geometry projection method for continuum-based topology optimization with discrete elements, Comput. Methods Appl. Mech. Engrg., 293, 306, 10.1016/j.cma.2015.05.005 Hou, 2017, Explicit isogeometric topology optimization using moving morphable components, Comput. Methods Appl. Mech. Engrg., 326, 694, 10.1016/j.cma.2017.08.021 Takalloozadeh, 2017, Implementation of topological derivative in the moving morphable components approach, Finite Elem. Anal. Des., 134, 16, 10.1016/j.finel.2017.05.008 Bendsøe, 1989, Optimal shape design as a material distribution problem, Struct. Optim., 1, 193, 10.1007/BF01650949 Zhou, 1991, The COC algorithm, part II: topological, geometrical and generalized shape optimization, Comput. Methods Appl. Mech. Engrg., 89, 309, 10.1016/0045-7825(91)90046-9 Allaire, 2004, Structural optimization using sensitivity analysis and a level-set method, J. Comput. Phys., 194, 363, 10.1016/j.jcp.2003.09.032 Wang, 2003, A level set method for structural topology optimization, Comput. Methods Appl. Mech. Engrg., 192, 227, 10.1016/S0045-7825(02)00559-5 Hoang, 2017, Topology optimization using moving morphable bars for versatile thickness control, Comput. Methods Appl. Mech. Engrg., 317, 153, 10.1016/j.cma.2016.12.004 Kreisselmeier, 1979, Systematic control design by optimizing a vector performance index, IFAC Proc. Vol., 12, 113, 10.1016/S1474-6670(17)65584-8 Svanberg, 1987, The method of moving asymptotes—a new method for structural optimization, Internat. J. Numer. Methods Engrg., 24, 359, 10.1002/nme.1620240207 Yan, 2009, A uniform optimum material based model for concurrent optimization of thermoelastic structures and materials, Int. J. Simul. Multidisci. Des. Optim., 2, 259, 10.1051/ijsmdo/2008035 Lorna, 1999 Amir, 2011, On reducing computational effort in topology optimization: how far can we go?, Struct. Multidiscip. Optim., 44, 25, 10.1007/s00158-010-0586-7 Zhu, 2019, A novel asymptotic-analysis-based homogenisation approach towards fast design of infill graded microstructures, J. Mech. Phys. Solids, 124, 612, 10.1016/j.jmps.2018.11.008